Question about 2001 Toyota RAV4
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
SOURCE: removing front door panel
there will be two bolt that are hidden under your arm rest they will probably be hidden little caps that just pop off most likely a star screwdriver you will need a window handle remover tool if you have power windows dont worry about it but you will also need a door panel clip remover tool or you can get by with a screwdriver covered in a cloth insert at bottem of the door an gently pry untill the door clip start to pop and release you will also need to remove a screw where you open the door from the inside hope you get it off if you break any of the door clips(happens all the time) just take broken one to the dealer or canadian tire or parts jobber hope this helps
Posted on May 28, 2008
The inner door panel is held in by clips and screw.
Look at the door near the door handle there should be screws holding it in and along the outer edge of the door. Once loose, and the door handle removed or the arm rest removed. The door panel then prys out , because of the clips that hold it on. Then pops out by applying pressure to the panel upward to the top of the door. The clips always break because of the design and plastic.
Posted on Mar 21, 2009
SOURCE: Avalon door panel
Below are the removal procedures for your vehicle's front inner door panel.
On models without power windows, remove the snap ring retaining window crank handle. Remove crank handle and cover plate.
Remove lower door frame bracket garnish. Using a screwdriver, remove inside door handle bezel. Remove power mirror control switch and disconnect harness connector.
Remove armrest panel. Remove 6 screws. Pry interior door panel loose from door.
Posted on May 23, 2009
Tips for a great answer:
Nov 05, 2012 | Cars & Trucks
Oct 26, 2012 | 2004 Toyota RAV4
Jan 24, 2018 | 1997 Toyota RAV4
Mar 07, 2010 | 2001 Toyota Camry
Oct 13, 2009 | 2001 Toyota RAV4
Aug 26, 2009 | 2003 Toyota RAV4
Jul 18, 2009 | 2002 Toyota RAV4
Mar 19, 2009 | 2007 Toyota RAV4
Oct 27, 2008 | 2002 Toyota RAV4
884 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: