Question about 2004 Dodge Ram 1500

1 Answer

I need to know how to pull off the hangers i guess they would be, that are mounted to the back wall of the regular cabs

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 297 Answers

The coat hangers? Take a philips screwdriver, take out the screw, and simply pull them off. If not the coathangers, let me now!

Posted on May 23, 2011

  • outlawrac778 May 23, 2011

    these arent the coat hangers but they are kind of like them, they sit about level with the middle of the seat back, they are a hanger type object that sits flat or they pull out to about a 45 degree angle so they are some kind of hanger, i just need to take them out.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

I have a 2006 nissan frontier crew cab i just pulled the handle to open the hood cable intact hood wont open how can i open it from the outside

There is nothing easy about doing this. The cable on Nissan vehicle is encased in a sheath all the way to the point where it mounts to the release itself so there is no way to cut the cable an fish it out with a hanger. Your going to have to try and access it from the very small space between the grill and the radiator mounting bracket area. This sometimes requires the removal of a small underside splash guard that protects that area from debris.

Jan 20, 2011 | 2006 Nissan Frontier

1 Answer

I need to know if my 2003 ford ranger 3.0 liter engine has a egr valve and where is it located

yes you have egr valve
its on the passenger side of the motor back at the fire wall
you can also locate it by looking at you exhaust
you will see a tube that goes from the exhaust up the fire wall and into the egr hope this helps
give feed back

Dec 28, 2010 | 2003 Ford Ranger Regular Cab

1 Answer

Need to remove radio from 2003 ford f150

Remove the center oval trim panel. I usually just grab in the HVAC vents and pull, but you might want to use a plastic trim tool to work your way around the center trim bezel.

Pro Fit International has some good directions with pictures ( obviously only use them for accessing the radio, no need to continue for the vehicle specific mount )

This should be your MY and make ( right click save as ):

Once the radio is exposed, you will see 2 sets of round holes on each side.
You can buy the tools, or just bend a wire coat hanger in the required shape to insert into the holes to release the radio.

These are usually called Ford DIN Radio Removal Tool ( or similar ) if you want to purchase the actual tools, but I have had good luck with the coat hanger DIY tool.

Jun 21, 2010 | 2003 Ford F150 Regular Cab

1 Answer

How do you unlock a 2002 Ford F-150 non-power locks door, without a key ?

You'd need a slim jim or a coat hanger and basically break into the truck.

Mar 29, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Front shock went through upper shock mount thats welded on frame due to a missing shock bushing, need to find a new shock mount to weld back on! any suggestions 1997 ford 150 4x4 ext cab longbed

This is not what you wanted to hear but when your talking welded in body parts your going to have to call the local auto salvage / recycling places (Yellow pages) to find what you need.

Let your fingers do the walking and your voice do the talking. You can spend ages in junk yards and yet not find what you need.

You can pick up the phone and usually after a few calls you find a "sharp cookie" that either has the part or knows where to get it.

Unless your willing to go to the FORD dealer and spend a fortune for the replacement part. I would recommend the above.


Feb 11, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Rear brake job

pull the two bolts holding the caliper on and pull the caliper off now get a C clamp and compress the piston all the way into the caliper now remove the two bolts in the caliper hanger and remove the hanger now the caliper should just pull off ( if corroted hit it with a hammer ) now just put every thing back to gether the way they came off...............WHEN DONE WITH THE BRAKE JOB MAKE SURE TO START THE TRUCK AND PUMP THE BRAKES UNTIL THE PEADLE IS HARD. YOUR PEADLE WILL GO RUTE TO THE FLOOR AT LEAST ONE TIME MAYBE MORE.

Jan 06, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

I have a 1999 ford f150 exhaust pipe and muffler

did the flange come apart or did the pipe break, if the pipe broke then you will have to replace the system fron the flange back, these exhaust systems look good but corrode from the inside out, get a new system i will probably come in three pieces, and new hangers, its pretty straightforward

Nov 26, 2009 | 1999 Ford F150 Regular Cab

1 Answer

Zack :how to relace rear rotors on 2003 f150

not hard no special tools needed just pull the caliper and caliper mounting bracket and rotor will slide right off

May 15, 2009 | 2003 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides