Question about 2001 Mercury Grand Marquis

1 Answer

Need diagram or picture where the low pressure ac connection is

Posted by on

1 Answer

So you can add refrigerant to a leaking system
and polute the atmosphere?

Have it properly & safely done at a repair shop,
trained & licenced to do so, using the proper
equipment.

If you follow the suction hose to the compressor
& don't see the low side fitting,then it will be on
or near the compressor

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ac recharge


Connect freon cylinder with compressor suction side And slowly refill refrigerant.

Aug 07, 2016 | 2007 Honda Civic 1.8

1 Answer

Does anyone have a Wiring Diagram Needed for the AC System on a 2003 Mercedes E320?


It is probably low on Freon, there is a pressure switch on the system that tells the compressor not to come on if the Freon is low.

Jul 24, 2014 | Mercedes-Benz E-Class Cars & Trucks

2 Answers

Ac problems


Either connection is bad to low pressure sensor or pressure sensor is faulty.

Jun 22, 2014 | 1997 Cadillac DeVille

1 Answer

Picture of low side ac port on 2001 buick regal


You low pressure port is against the firewall just below the center of the cowl and is best accessed from the drivers side

Jun 30, 2012 | 2001 Buick Regal

1 Answer

1991 Mercedes Benz AC Cycling Switch /Compressor Clutch Won't Engage Completly Spins 1/6 of a complete spin repetedly then stops


You need to have the refrigerant charge level checked, it sounds like it is low. You Need a set of AC pressure gauges to do this testing. If the system has a low charge the pressures will be very low in the low side testing port.

Jun 26, 2012 | Cars & Trucks

2 Answers

When i turn on the a/c,the compressor does not work


CHECK REFRIGERANT CHARGE. USING A MANIFOLD GAUGE SET. HOOK MANIFOLD GAUGE SET TO LOW PRESSURE PORT AND HIGH PRESSURE SIDE PORT. LOW SIDE PRESSURE SIDE SHOULD HAVE 25 - 36 PSI AND HIGH PRESSURE SIDE SHOULD BE 178 - 237 PSI. IF LOW SIDE PRESSURE SIDE READ BELOW 20 PSI THE LOW PRESSURE SWITCH WILL NOT TURN ON THE AC COMPRESSOR CLUTCH NEED TO ADD LITTLE MORE REFRIGERANT. IF REFRIGERANT LEVEL CORRECT CHECK AC COMPRESSOR FUSE AND RELAY.IF POWER GOING TO AC COMPRESSOR CLUTCH YOUR COMPRESSOR CLUTCH HAS OPEN WINDING. AC COMPRESSOR CLUTCH NEED REPLACING.

Aug 11, 2011 | 1997 Nissan Pathfinder

1 Answer

Can't locate the Low Pressure Side service port of 2001 VW Beetle


Unfortunately I am aware of no pictures or diagrams. There are two connections, a low pressure and a high pressure connection. The high pressure connection is found between the engine and the firewall. The low pressure connection is in front of the engine along the inside lip of the hood closure. As you open your hood, it's located just in front of your lefty knee. The connection is on an aluminum tubing, and mine has a black screw cap on it. Not sure if the cap varies in colors, or whether your may have been removed. The connecting hose from your freon refigerant H134a will ONLY fit onto the low pressure connection. The charge is just a bit more than 2 pounds of freon. In a 2001 you may need to add more than i can if the car has never been recharged, but start with one can and see how it goes. You may also want to add a freon with a sealant just in case you have a small leak. One can is approximately 13 ounces.

Jun 07, 2009 | 2001 Volkswagen Beetle

2 Answers

I need to know how to jump the ac low pressure to get my ac compressor to come on.


If you look on the low pressure side of the AC system you will see a plug that is incorporated in to the line. It will have two wires leading to it. Remove the plastic clip that attaches the two wires to the sensor and use a short piece of wire to connect the two terminals in side the plug by putting the ends into the cap. This will bypass the low pressure sensor and allow the AC clutch to engage and begin to cycle again. Remember this low pressure switch is there for a reason. If you don't add more r-134 to the system and allow the AC compressor to cycle you will destroy the compressor. You need to charge the system when you bypass the low pressure switch and get the system up to full charge status and reconnect the switch.

May 24, 2009 | 1995 Chevrolet Camaro

Not finding what you are looking for?
2001 Mercury Grand Marquis Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...