Question about 2007 GMC Acadia SLE

1 Answer

My low beam headlights and my driving lights do not work. My high beams and fog lights do work. How do I fix this.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

Turn off engine and open the hood.
Remove the front wheelhouse liner. Whichever side, say we begin with the front left(drivers). If you dont wish to remove the front left tire, just turn the wheels far to the right to gain enough clearance. And you dont need to remove the whole liner and all the screws and retainers. . Just remove only those nearest the headlight and front bumper area in order to loosen the front half portion of the wheelhouse liner. Just enough for your arms to move freely inside.
At this point, try your hands to reach in for the rear of the headlamp low beam. Work your hands inside to remove ccw the lamp cap, and then on the low beam bulb. Note the position before turning it counterclockwise to remove.

Note: If you still need more clearance for better access, you can (1) remove the tire. or (2) remove the 3 screws that secure the bumper to the body, and then pull bumper outwards to loosen.Try to reach in again. If still not possible for you, proceed with the next step.

Remove the front sight shield. This is the plastic shield with seven pop up retainers. After removing the front sight shield, you will get a better view of the headlamp mounting bolts.
Remove the 4 bolts of the headlamp assembly. Two on top, and one on both sides. Then pull the headlamp forward enough and try to reach in your hand to remove the bulb cover and then remove the bulb from its socket and connector. turn ccw to remove. Note also the bulb position before you remove it from its socket.
Need more clearance? Remove the remaining retainers(6) thats supporting the front bumper fascia from the top. It will be better if you have an assistant who can stretch out gently the loosened bumper on that particular side, while you carefully maneuver the headlamp assembly removal inch by inch. If in case still unlucky, or you if found later that the bulb connector is melted or burned, proceed furthermore and remove the headlamp assembly all the way.
A burned connector needs to be replaced and a new bulb installed, even if you find the old bulb not busted.
With all the parts removed, you wiill have a better view of all other components within that area, the park and signal bulbs, the horn, the fog lamp, so that the next time you need to work on them you'll have a better gameplan. It's a matter of practice. I know its kinda tedious job for many Acadia owners. Just imagine removing so many screws for one simple bulb. But if you'll be patient enough, and get the hang of it, you will be saving labor costs.and enjoy loving your Acadia.

I hope you remember how and where components were removed, so you wont be lost in the reinstallation. Okay ? I hope wyet-helped. goodluck. : )

Posted on Jun 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

Headlights went out. Replaced bulbs and switch and still lights don't work. Fog lights and high beams work? What else can work?


If high beams work and low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of these relays located next to each other. One controls the low beam headlights and the other the cooling fan. Swap the relays and check your low beam headlights. If the low beams work you have a bad relay.

Sep 20, 2010 | 2006 GMC Envoy

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

1 Answer

Low beam headlights not working on 2004 Pontiac Montana extended


You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Dec 26, 2008 | 2004 Pontiac Montana

2 Answers

High beams wont turn on.


First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
2007 GMC Acadia SLE Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...