Question about 1991 Saturn SL1

1 Answer

How to rest the monitiors in sturn 1991 sl2 - 1991 Saturn SL1

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,252 Answers

  • 1

    Insert the key into the ignition and turn it to the "ON" position. There is no need to start the car.

  • 2

    Press the button located in the center of the instrument cluster ONCE. The display should now read "OIL LIFE" instead of vehicle mileage.

  • 3

    Press and hold the button for 3 seconds or until you hear the chime, the display should say "RESET?". Let go of the button and press the button one more time, but do not hold it, to confirm that you want to reset.

  • 4

    You're Done!! You have just reset the oil life monitor on your Saturn Ion!! Now you don't have to worry about it randomly telling you that you need to change you oil.

  • Posted on May 23, 2011


    1 Suggested Answer

    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
    click here to download the app (for users in the US for now) and get all the help you need.

    Posted on Jan 02, 2017


    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    My 2002 sturn SL2 is hard to start runs rough and wont go faster than 25 -30 miles per hour 2500 -3500 rpms manual shift 1.9 engine DOC

    It is most probably the valve and or spark timing that need to be readjusted. Need to take it to a dealer who has the right test and tuning equipment.

    Feb 16, 2015 | Cars & Trucks

    1 Answer

    Why does my 1991 saturn sl2 starts up and cut off

    Listen for the fuel pump buzzing if you can't hear it replace the pump relay

    Aug 22, 2014 | 1991 Saturn SL2

    1 Answer

    Loosing good clutch pedal on a 99 saturn sl2 after a minute or 2.


    Sep 25, 2012 | 1991 Saturn SL2

    1 Answer

    My automatic seat belts are stuck around the halfway mark, how would I get them into the driving position? the Car is a 1991 saturn SL2 Sedan.

    Probably best to replace, when the mechanism gets unreliable do not risk fixing try a wreckers yard, make sure the replacements pull out cleanly but lock when "jerked" hard.

    Dec 15, 2009 | 1991 Saturn SL2

    1 Answer

    1991 saturn sl2 water pump replacement

    well first you drain the coolant out at the low point on the radiator, that way it is saved if new. then you take off the right front wheel and remove the plastic access cover from behind the wheel to get to that side of the engine. then you take off the serpentine belt and etc. yes you can do this with the engine still in the car. you may want to consider replacing the serpentine belt and tensioner while you are in that area.

    Nov 02, 2009 | 1991 Saturn SL2

    1 Answer

    '98 SL2 Saturn Traction Control

    Traction control helps limit tire slip in acceleration on slippery surfaces. In the past you had to feather the gas pedal to prevent the drive wheels from spinning wildly on slippery pavement. Many of today's vehicles employ electronic controls to limit power delivery for the driver, eliminating wheel slip and helping the driver accelerate under control. Don't turn it off.

    Mar 09, 2009 | 1991 Saturn SL2

    1 Answer

    Sub frame interchange

    yes a subframe from 91-94 will work.

    Jan 09, 2009 | 1991 Saturn SL2

    1 Answer

    Ignition switch 1991 sl2

    Work your steering wheel while attempting to pull it out, you might try some WD 40 if you can get it to go back far enough, Another thing that might work is to take a pair of channel locks and add some pull to it while attempting to remove it. Unfortunately, the module will have to be replaced any way, but if you can get it freed, the WD 40 might put you back in business.

    Dec 09, 2008 | 1991 Saturn SL1

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    101 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts


    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8567 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides