Question about Buick Regal

Open Question

Torque specs for axle nut & mounting bolts on 98 buick regal ls

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 366 Answers

SOURCE: torque specs

the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

Posted on Apr 27, 2009

Ad
  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

warlock61
  • 659 Answers

SOURCE: Axle nut torque spec

184 ft/lb

Posted on May 11, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

fingaz22
  • 1068 Answers

SOURCE: I am replacing the rear struts on my 98 toyota xls

upper nuts 36 lbs and the bottom two big ones are 145 lbs and the upper mount to body are 29 lbs. good luck man

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2014 Ford Fusion 2.5L, 2WD Torque Specs for front wheel hub assembly needed Axle nut/bolt, Hub bolts


the four axle nuts, 98 ft lbs, tighten in criss-cross pattern.
The hub nut/wheel bearing, 148 ft lbs, use new nut, don't let vehicle weight sit on the ground while torqueing, it could damage the wheel bearing.
If I left something out, give me a holler.

Jul 26, 2017 | Ford Cars & Trucks

1 Answer

Torque specs for wheel hub nut on a 06 buick rainier


The Hub Mounting Bolts should be tightened to 96 Foot Pounds
The Hub Axle Nut should be tightened to 192 Foot Pounds

Nov 08, 2014 | Cars & Trucks

3 Answers

Torque specifications 2000 chevy impala wheel bearing


The 2000 Chevroleticon1.png Impala is a sedan available in a pair of different versions, the base model and the LS. The Impala's torque specifications depend on the model, as the base and LS have different engines

Read more : http://www.ehow.com/list_7412083_2000-impala-torque-specifications.html

Oct 11, 2014 | 2000 Chevrolet Impala

1 Answer

2006 Chevy uplander front axle nut torque specs


118 hub nut !!hub bolts are 96 ftlbs.177 and even 144 is to high,you can find them on line to be sure,

Jan 12, 2014 | 2006 Chevrolet Uplander LS

1 Answer

Torque specs 98 riv replacing wheel hub assy


Hello blboyer0,

The torque for the axle nut is 107 ft. lbs. The hub bearing bolt should be torqued to 70 ft. lbs.

I hope this helps.

Regards,

netvan

Aug 07, 2011 | 1998 Buick Riviera

1 Answer

I need to know how to replace the hub bearings on my grand am


The front wheel bearings on this car come as a sealed unit inside the wheel hub.
things you will need to replace them
-torque specs for your cars axle nut, hub retaining bolts, brake caliper mounting bracket bolts, and wheel lug nuts.
-a socket set
-a breaker bar
-a axle nut socket
-a c-clamp
-a jack
-two jack stands

To complete the job follow these steps
1) remove the hub cap/wheel center cap
2) remove the axle nut cap (use the tip of a small flat screwdriver to pry up one edge, pull it off)
3) remove the cotter pin from the end of the axle shaft
4) using a breaker bar style wrench (non-ratcheting socket wrench) with a helper pipe slid over the end to increase leverage use an axle nut socket to loosen the axle nut without removing it.(these are torqued pretty tight and can be stubborn, don't be afraid to use a generous amount of penetrating fluid).
5) once the nut is loose, loosen the wheel lug nuts
tip: doing steps 4 and 5 is made easier with the weight of the car on the ground to keep the wheel from spinning while you loosen the nuts.
6) jack up one corner of the car, and support it with a jack stand. lower the jack to rest the weight of the car on the jack stand, then lift the jack back up to contact the cars jacking point, without taking the weight off the jack stand. leave the jack in place as added support.
7) remove the wheel
8) remove the brake caliper from the hub (if you remove the caliper mounting bracket with the caliper still attached as a unit it's only two bolts to remove it together) hang it from the strut spring with some heavy wire or a metal clothes hanger being sure not to pinch or kink the brake line in the process.
9) remove the brake disc/rotor
10) locate the wheel speed sensor (a small electronic box located on the back side of the wheel hub) a small bolt secures it to the hub, remove the bolt and move the sensor to the side out of your way.
11) locate and remove the three hub retaining bolts (reachable from the rear of the hub)
12) remove the axle nut and use a jack stand to support the axle shaft
13) use a "soft blow" hammer (if possible) to tap on the back side at the outer edges of the hub working your way around in a circle so as to drive the hub out of its housing/steering knuckle evenly. As the hub comes out of the housing/steering knuckle the axle will want to slide with it, in turn pulling the axle out of the transmission. try not to let this happen. if necessary tap lightly on the end of the axle shaft to free it from the hub, once the hub comes loose remove it. this is where supporting the axle with a jack stand comes in handy. try not to allow the axle to scratch the hub mating surface.
14)clean the cavity that the hub came out of, remove the axle shaft support jack stand as you slide the new hub into place lining up the axle and the holes where the hub retaining bolts go (if you just shove it in, it can be impossible to turn it to line up the bolt holes) be sure that it is seated tightly against the steering knuckle, and that the axle is all the way into place. put the axle nut on but do not tighten it yet
14) replace the hub retaining bolts and torque to specs
15) replace the wheel speed sensor
16) replace the rotor/brake disc
17) replace the brake caliper and mounting bracket unit, this may require you to spread the brake pad pistons (this is easiest with a c-clamp slowly squeezing the piston open so as to not create too much pressure in the brake line or master cylinder). if a c-clamp is not available a large pair of channel lock pliers can do the job. once its in place, torque the caliper bracket mounting bolt to specs
18) raise the car off the jack stand, tighten the axle nut to snug and replace the wheel, remove the jack stand and lower the car to the ground.
19) torque the axle nut to specs
20) replace the axle shaft cotter pin and axle nut cap
21) torque the wheel lug nuts to specs
this should complete one side so switch your tools and equipment to the other side of the car and repeat the process. i hope this helps

Jan 05, 2011 | 1996 Pontiac Grand Am

2 Answers

Torque specs


the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

Apr 26, 2009 | Chevrolet Blazer Cars & Trucks

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...