Question about 2000 Chrysler Concorde

1 Answer

My 2000 Chrysler Concorde was rear-ended, then complelely shutdown..No power at all, not even hazard lights. Before I was rear-ended, car was running perfect..Is there a reset button or something?

Posted by on

  • Hope Mabry May 25, 2011

    We checked all the fuses and they are fine. Must be a short somewhere??

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 3,640 Answers

This is for a 99 but 2000 should be the same. There might be a red Reset button. Press for about 5 seconds, and release. The Reset button is in the fuse/breaker box under the hood,

Posted on May 23, 2011

  • Hope Mabry May 24, 2011

    No reset button under the hood in the fuse box.. any other ideas?

  • carl May 24, 2011

    just found out there is no shutoff switch, like on the fords. what happened you had to break a wire or another problem to fuel pump. did you check the fuse and relay for the fuel pump!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a turn signal relay on a 2000 Chrysler Concorde


The Combination Flasher, also referred to as the combo-flasher, is mounted to the in-line bracket which is located to the right of the Junction Block. The flasher can be removed by pulling in a rearward direction. The left under panel silencer duct must be removed to access the flasher. The combo-flasher is black in color for ease of identification.
The Turn Signal and Hazard Warning Flasher is combined into one unit called a Combination Flasher (Combo-Flasher). The combo-flasher controls the flashing of the hazard warning system and the turn signal system. An inoperative bulb or incomplete turn signal circuit will result in an increase in flasher speed.

Ref: http://www.10w40.com/questions/auto-repair-questions/where-is-the-flasher-relay-on-a-2000-chrysler-concorde
Good Luck

Mar 03, 2015 | 2000 Chrysler Concorde

1 Answer

Why won't my hazard lights turn off on my chrysler concorde?


Might have a bad switch behind steering wleel on column.

Sep 13, 2014 | 1997 Chrysler Concorde

1 Answer

2000 chrysler concorde turn signal/hazards don't work fuses good changed multifunction switch still no go whats next?


I am having the same problem with my 1999 chrysler concorde amoung other problems. But they will work at times and then they will just stop for no reason. Have you found any solutions yet?

Aug 24, 2011 | 2000 Chrysler Concorde

1 Answer

2000 Chrysler Concorde, completely shutdown while sitting at red light. No power at all, not even hazard lights. any ideas?


If your alternator is'nt charging, this will run the battery down, at the same time cause your car to die...This would be one cause....

May 24, 2011 | 2000 Chrysler Concorde

1 Answer

How do you change the brake light on the back window on a 2000 chrysler concorde


  1. Release decklid latch and open decklid.
  2. From under rear shelf panel, disconnect the lamp socket from the CHMSL housing.
  3. Remove bulb from the socket.
INSTALLATION
  1. Install the bulb into the socket.
  2. Install socket into CHMSL housing.
  3. Verify CHMSL operation.

Apr 19, 2011 | 2000 Chrysler Concorde

1 Answer

Rear strut install


I have a 1999 Chrysler LHS and have had the rear struts done for me. You have to remove the back seats to get at them. I know its not the total solution, but it should put things in a better perspective for you.

Jun 02, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...