Question about 1998 Ford F150 Regular Cab
P0171 is lean exhaust bank one ( passenger side) and p0174 is lean exhaust bank 2 ( drivers side). First we need to look for vacuum leaks, low fuel pressure, Intake air leaks after the mass air flow sensor, pvc system. Because you have both sides lean I would start looking at these spots.
Posted on May 23, 2011
I have a PO174 code. I took the mass air flow sensor out and sprayed it with mass air flow cleaner and replaced. It did NOT fix my problem? Something else maybe?
Posted on Sep 02, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Check engine light with codes
P0171 & P0174 indicate Lean burning on banks 1 and 2. The most common cause is a dirty or defective MAF (Mass Air Flow) sensor. Other causes are bad fuel filters or a broken vacuum line.
Posted on Jul 06, 2011
SOURCE: Code #P0171 & code #P0174
The most common problem on a Ford with these codes is deteriorated PCV hoses. Check the hoses from the PCV valve to the intake manifold. Pay special attention to the rubber elbows. They often crack on the inside curve and the crack is hard to see.
Posted on May 22, 2008
SOURCE: p0171 and p0174 codes
P0171 System too Lean (Bank 1)
P0174 System too Lean (Bank 2)
If a car has a check engine light on and has P0171 and P0174 codes stored, the most likely cause is a vacuum leak. These codes are set by the car’s computer when it sees too much oxygen in the exhaust. Excessive oxygen readings in the exhaust will set lean codes. This does not mean that the oxygen sensors are defective. It is a common mistake for people to replace oxygen sensors when lean codes are present. Just because the code is related to oxygen sensor readings, it doesn’t mean that the oxygen sensors are bad. If both of these codes are stored this means that both banks of the engine have excessive oxygen in the exhaust. If the oxygen sensors are replaced it’s most likely that the same codes will reappear. It is very uncommon for two oxygen sensors to fail at the same time.
Therefore the most likely cause of P0171 and P0174 codes is a vacuum leak. The source of a vacuum leak can be one of many things. The most common cause of a vacuum leak is a leaky hose. Vacuum hoses over time can become dry and brittle. The rubber deteriorates and can leak causing a vacuum loss. Many times a leaky vacuum hose can be found by listening for a hissing sound. A large vacuum leak can even make the car run rough at idle. In some cases it will not idle without feathering the gas pedal.
Posted on Sep 10, 2009
SOURCE: check engine light codes, p0171,
this fords have very comun problems with maf sensors geting contaminated, if you have not or can hear any vacium leaks, the problem is goin to be a conataminated mas air flow snsor (maf)
allow the engine to cold down for at least 15minutes and the remove the air filter hosing and inside has to have a sensor, clean the two liitle resistors inside with brake or carburetor cleaner, allow it to dry and reinstall it.
if this inf help please mark it as fixya ranking after you try what i said
Posted on Jun 30, 2008
po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes
Posted on Dec 15, 2008
Tips for a great answer:
Mar 23, 2017 | GMC Cars & Trucks
Jan 27, 2016 | Cars & Trucks
Sep 27, 2013 | 1999 Ford Explorer
Dec 22, 2012 | 1997 Lincoln Town Car
Jun 09, 2012 | Cars & Trucks
Jul 06, 2011 | 2001 Mercury Sable
System Too Lean (Bank 2)
Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust.
Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time.
Dec 17, 2009 | 2002 Ford Windstar Cargo
Dec 14, 2009 | 2000 Nissan Maxima
1,416 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: