Question about Hyundai Accent

1 Answer

Car was ok. then it lost power and sounds like it only running on 2 cylinders. aa said 2 of the ignition coil leads had gone and 2 plugs. got all new plugs and leads still the same. plus it smelt a bit and the manifold was glowing bright red when was hot.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,508 Answers

It may have a failed head gasket, this would also make two coil leads not work.
It will need a compression test and a radiator pressure test

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Initial start up the engine sounds like its running on 2 cylinders under powered intil the temp gauge reads normal ???? any body got the answer please


Cold starting misfires can often be caused by either tired high tension spark plug leads or ignition coil packs. If replacing leads, then replace with a full, new set. Coils can be changed individually, but it is often the case that if one has failed, then the others aren't far behind. Some cars have individual coil packs on each spark plug. Some cars have a single pack for all plugs and some have coil packs which may control two or more plugs.

To check for a misfire (ignition failure) follow these steps:

(Cold start) (Use a pair of insulated pliers)

1) Start the vehicle

2) When the vehicle starts misfiring, disconnect plug leads or coil pack connections one at a time. If the vehicle idles even more roughly, then that plug or pack should be considered fine.
Replug each connection before disconnecting the next one. Once you disconnect a plug lead or coil pack connection and find no difference in poor engine running, then you have likely found the offending cylinder. Check the spark plug condition, lead and/or coil condition and connections on that cylinder.

3) Replace components as necessary.

Oct 12, 2014 | Cars & Trucks

1 Answer

Computer reads misfire cylinder 2 and 6


Like Ronald Wilson said it could be something linked to the ignition ( ignition coil, spark plugs or spark plug leads ).
No injectors or oxygen sensor.

Mar 21, 2014 | 2001 Jeep Grand Cherokee

3 Answers

Cde po301


A P0301 code means that the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #1.

Symptoms may include:
· the engine may be harder to start
· the engine may stumble / stumble, and/or hesitate
· other symptoms may also be present

A code P0301 may mean that one or more of the following has happened:

· Faulty spark plug or wire
· Faulty coil (pack)
· Faulty oxygen sensor(s)
· Faulty fuel injector
· Burned exhaust valve
· Faulty catalytic converter(s)
· Running out of fuel
· Poor compression
· Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Feb 15, 2010 | 2004 GMC Envoy

1 Answer

Car just stopped running. Lost power suddenly.


Find an inductive pickup indicator for spark. Place on distributor cap to see if spark is at coil internal tower. If no spark at internal tower, look at ignition module or pickup coil. Ignition modules are prone to failure on 626's. But if you have spark at tower but not at the wire end, then your rotor is gone.

Aug 18, 2009 | 1993 Mazda 626

2 Answers

Car only running on 2 cylinders


Sounds like a bad coil pack, see if you can borrow or puchase a used 1 to test for the problem.If the problem is corrected you can either keep the used 1 or buy new. Hope this helps.

Jul 27, 2009 | 2003 Ford Focus

1 Answer

How do i change the spark plugs on a 2003 kia rio


INSPECTION

1. Disconnect high-tension code from spark plug.
2. Remove the spark plug.
3. Connect the spark plug to a high tension code.
4. Hold the spark plug with insulated pliers 5~10mm from a ground.
5. Crank the engine and verify that there is a strong blue spark.
If there is no spark, inspect the following points.

Step Inspection Action

1 Check for good connection of ignition coil Yes Go to next stop.
No Repair or replace
2 Check if resistance of high-tension leads are OK Yes Go to next step.
No Replace
3 Check if the ignition coil is electrically charged
1) Ignition switch "ON"
2) Check if the engine coil (+) is electrically charged
Yes Go to next step
No Check the wire harness between ignition switch ignition coil and ECM
4 Check if resistance of ignition coil is OK
Resistance
Primary : 0.36~0.44Ω (at 68°F (20°C))
Secondary : 10.9~13.3kΩ (at 68°F (20°C)) Yes Go to next step
No Replace
5 Check if ECM is OK Yes
No Replace

REMOVAL

Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.

Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.

INSTALLATION

1. Install spark plug into cylinder head.

Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)

2. Reconnect high-tension leads.
3. Reconnect negative battery cable.

Jul 17, 2009 | 2002 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...