Question about 2000 Hyundai Accent

1 Answer

Diagonastic test said crankshaft sensor needs replaced where is it on the car?

Where is crandshaft sensor on 2000 hyundai sonata

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

This is the picture from their website. On my 2002 it was located where they are calling "A".
diagonastic test said crankshaft sensor needs repl - ebke003b.gif

Posted on Sep 05, 2008

  • Dean Sep 05, 2008

    Sorry about that - the picture did not paste for some reason. One mine it was located in the following position: Looking at the front of the engine it was on the right-hand side upper part of the block. Should have a single wire connected to it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone show me exactly where crankshaft position sensor is located on 2000 Hyundai sonata v6


follow this link for a u-tube video , it is a lot of work and there must be an easier way but i've not found it yet
Crank sensor 2000 Sonata

Jul 08, 2015 | Hyundai Cars & Trucks

2 Answers

Went to Deq for emissions test and the diagnostic codes read p0320 on 2004 Hyundai sonata what needs to be replaced?


P0320 =no signal detected from crankshaft position sensor during cranking, my guess is replace the CPS

Feb 24, 2015 | 2004 Hyundai Sonata

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

1 Answer

Where is the crankshaft sensor located on 1999 v6 hyundai sonata?


The CPS for these motors is located in the front of the engine and the the timing belt cover needs to be removed to gain access. If you need further instructions on removal as well as diagrams, email me at iambanshee74@yahoo.com and I will send those immediately.

Jul 13, 2010 | 1999 Hyundai Sonata

1 Answer

Diagram 2004 hyundai sonata crankshaft sensor A


U uvicasion del crank shaft position sensor

Mar 27, 2010 | Hyundai Motor 2004 Sonata

1 Answer

My mechanic is having trouble locating the crankshaft position sensor on my 2005 hyundai sonata does anyone know where it is located?


hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.c9acd5a.jpg

Feb 21, 2010 | 2000 Hyundai Sonata

1 Answer

I have a 2000 hyundai Sonata, 6 cylinder eng. My


The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
2cb09a4.jpg A word to the wise... replace the O2 snsr as well.

Sep 24, 2009 | 2000 Hyundai Sonata

1 Answer

SONATA V6 2000 DOES NOT START NO FIRE CODE PO335


The crankshaft sensor determines when to fire the plugs; if it has failed, no plugs will fire.
If you have no mechanic friends who know how to test this sensor, you should probably invest in an aftermarket service manual. They have simple tests for most sensors and conditions that don't require costly equipment or detailed knowledge.
I prefer Haynes and they are available on line here:
Haynes Sonata Manual
You may also find them elsewhere for a few dollars less.

May 17, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

418 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...