Question about 1995 Honda Accord

2 Answers

My front wheels are not vertically straight. The bottom seems to be out more than the top. Is there any way i can toe in the bottom? Or toe the top out? Thank you

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 165 Answers

Better left to an aliengment specialist with 4 wheel aliengment machine.Do you have severe tire treadwear(uneven tire treadwear) problems usually indicated bye greater wear on inside or outside of tire.If so get the car proffesionally alienged

Posted on May 23, 2011

Ad

You can not do anything

You need an alignment shop to check your car
for wear or damage.

Not a chain store that does alignment for $70.00

Posted on May 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when your front wheels are not parallel? Driver side points straight forward and the front left points a little to the right.


It means that your front end is out of alignment. The front wheels should be adjusted so that both point slightly inwards at the front of the car when the steering wheel is straight. This is referred to as "toe-in." The reason why cars and trucks are aligned with toe-in is because the wheels go to a straight position when traveling on a highway due to the road resistance pushing the tires back. What you have is a "toe-out" condition which will cause the tires to wear faster at the side adjacent to the back of the wheels. Have your car aligned to avoid such uneven wear.

Feb 22, 2015 | 2002 Chevrolet Impala

Tip

Should I worry about my vehicle's alignment


Alignment refers to the way your car's wheels are positioned. Your wheels should be parallel and facing forward.

How does alignment affect my vehicle?
When your wheels are properly aligned, you'll get better gas mileage, your tires will last longer, steering will be easier, and your ride will be smoother and safer.

What could go wrong with my alignment?
Several factors could contribute to a shift in alignment including old, worn-out components including Ball Joints, Control arm bushings, and poor road conditions, resulting in a few different problems including Camber, Toe and Caster, and if any of these problems develop, they will take a toll on your vehicle's tires, performance and manageability. Worn out shocks and struts can also be a serious problem with un-even tire wear.


Camber
The wheels are tilted, either inward or outward. This will create pulling and tire wear.


Toe
A change in the distance between the front and back of the front or rear tires. This will wear on the tires, too.


Caster
A backward or forward tilt at the top of the wheel's spindle support arm. This will cause either loose or difficult steering.



If any of these problems develop, they will begin to take their toll on your car's tires and performance, as well as steering

How will I recognize a problem with my alignment?
Check your steering wheel when you're driving. Does it stay straight? Does it vibrate? When you are traveling along a straight road, does your vehicle pull to one side? Is your steering loose, or difficult to control? Have you noticed uneven tire wear?


Check your tires periodically. A number of different things can affect your tires - from alignment to suspension components.
As a general rule, you should have your alignment and related components, such as ball joints, control arm bushings, checked every 10,000 miles or once a year, and there are three types of alignment jobs with a good-better-best approach.

GOOD
Two-wheel geometric centerline alignment.
This adjusts the toe on your front wheels only. This will work only if your rear wheels are properly aligned. (Used mostly on trucks and older rear-wheel drive cars).

BETTER
Four-wheel thrust line alignment.
This aligns the front wheels to the rear-wheel alignment.

BEST
Complete four-wheel thrust line alignment.
This is the optimal approach: aligning all wheels straight ahead and parallel.

After a thorough review of your alignment, your The Wright Import technician will present you with the findings and all of your options before beginning any work on your vehicle.

What is a wheel alignment? How does it effect handling and tire wear? When should I do an alignment? What causes alignments to go out? How would I know if my alignment is out?

A wheel alignment is nothing more than setting the angle of the hub/wheel so it tracks in the right direction. Most vehicles have four-wheel alignments, meaning each of the four wheels is separately aligned. Your basic alignment consists of three angles: camber, caster and toe-in. Camber is the tilt of the tire when viewed from the front of the car. Positive camber means the top of the tire is tilted away from the car. Negative camber means the top is tilted in. Camber has a lot to do with cornering performance. Too much negative camber will wear the inside of the tires prematurely. Too much positive camber will wear the outside tread.

Caster is the inclination of the front spindle. Picture the angle of the forks on a bike top to bottom. When the caster is out, it creates a pull or wandering condition and sometimes a slow responding steering wheel. Toe-in is measured in inches or degrees. Viewing from the front of the car, it is the difference between the front and rear center-line of the tire. Toe-in means the fronts of the tires are closer together. Toe-out means, the fronts of the tires are farther apart. Toe-in or out has the most effect on tire wear.

When your car is out of alignment, the tires will wear prematurely. In some extreme cases, new tires will be gone within 500 miles. At the price of tires, especially high performance tires with soft compounds, you want to keep your vehicle in alignment as long as possible. Other symptoms of an out-of-alignment car are poor handling, pulling to one side, or wandering from side-to-side. An alignment will also affect the steering wheel response and how quickly it returns to the center.

Your vehicle's alignment should be checked every 10,000 to 12,000 miles. Any harsh impact such as potholes, curbs, objects in the road, or the damage of an accident, should prompt you to have your alignment checked. If you do any modifications to your suspension, raising or lowering your car, that will affect the alignment angles. Even changing the tire size will effect the alignment. Loose, worn or bent suspension parts such as ball joints, springs, bushings, and control arms will have an adverse affect on your alignment, too. In most cases you do not know if your alignment is out. The best way to check it is with a precision alignment machine. Laser optics combined with a computer allow for the most accuracy in alignment readings.

Remember you are aligning the hub of your vehicle. Check to see if the alignment shop or dealer has equipment that attaches to the hub, not the wheel. Many independent shops that do alignments have a specialty tool called "Tru Align" that attaches to the hub. This will make for a much more accurate alignment with the added bonus of not damaging the delicate finish on your wheels.

There is a lot more to suspension alignment, especially if you push your vehicle on the track. The modifications you make on your suspension are just the beginning. Once you start down this road you will be concerned with things like bump steer, weighting (vertical load), pre-loading, tire traction versus tire load, and more. Now you're thinking under-steer, over-steer, tire compound, sway bar design, and other topics that can be covered in a later article. For now, just remember to have your vehicle aligned every 10,000 to 12,000 miles in normal driving conditions.
If you accidentally hit a curb, or drive through a nasty pothole or other road obstruction, that would be a cue to have your car's alignment checked more often. Proper alignment is good for your car. It will save unnecessary wear on your tires. It will ensure that your vehicle is giving you the handling the factory designed the car to have. And, most importantly, a properly aligned car is safer and more fun to drive. Have your alignment, ball joints and suspension checked regularly checked regularly

on Dec 11, 2009 | Ford F-150 Cars & Trucks

1 Answer

Front wheels toeing in, in forward and toeing out in reverse


Check your lower control arm bushings for play.

Nov 13, 2013 | 1997 Ford Windstar

1 Answer

How to do a wheel alignment


nearly impossible but there are some things that you can do to reduce tyre wear.. 1---place the wheels in the straight ahead position. Using a spirit level place it vertical across the front rims touching only the rim top and bottom . adjust to achieve the bubble just touching on the outer line. That should give you about 1/2 to 1 degree camber. next measure with a tape the distance between the left and right rims 1/2 way up on the front of the rim. Record this measurement. Repeat the measuring at the back of the front rims at the same level as the front measurement was taken Adjust the tie rod ends evenly until the front measurement is anout 1/8 to 1/4 " smaller than the rear measurement. This is the toe in/ out measurement. The caster adjustment you will need a caster angle gauge. They are available and they stick on the hub center. and measure the difference in degrees from full left to full right turn. It need to be about 1 to 1&1/2 degrees positive.. It would be cheaper on the tyres to have the alignment done professionally and a sight quicker.

Apr 04, 2013 | Subaru Impreza Cars & Trucks

2 Answers

I want to know how to fix the alignment on my 1995 honda accord ex.


Before making wheel alignment adjustment, perform the following checks:
  1. Tires should be equal in size and runout must not be excessive. Tires and wheels should be in balance, and inflated to manufacturer's specifications.

  2. Wheel bearings must be properly adjusted. Steering linkage and suspension must not have excessive looseness. Check for wear in tie rod ends and ball joints.
  3. Steering gear box must not have excessive play. Check and adjust to manufacturer's specifications.
  4. Vehicle must be at curb height with full fuel load and spare tire in vehicle. No extra load should be on vehicle.
  5. Vehicle must be level with floor and with suspension settled. Jounce front and rear of vehicle several times and allow it to settle to normal curb height.
  6. If steering wheel is not centered with front wheels in straight-ahead position, correct by shortening one tie rod adjusting sleeve and lengthening opposite sleeve equal amounts.
  7. Ensure wheel lug nuts are tightened to torque specifications
Ride Height Adjustment

Before adjusting alignment, check riding height. Riding height must be checked with vehicle on level floor and tires properly inflated. Passenger and luggage compartments must be unloaded. Bounce vehicle several times, and allow suspension to settle. Visually inspect vehicle from front to rear and from side to side for signs of abnormal height.
Measure riding height. See figure. Riding height between left and right sides of vehicle should vary less than 1′ (25.4 mm). If riding height is not within specification, check suspension components and repair or replace them as necessary.
Wheel Alignment Procedures

Honda recommends using commercially available computerized 4-wheel alignment equipment. Follow equipment manufacturer instructions to obtain vehicle alignment settings. Use following procedures for necessary adjustments.
Civic Camber Adjustment
Compare camber settings with vehicle manufacturer recommendations. If camber is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck camber.
Civic Caster Adjustment
DO NOT use more than 2 shims. If more than 2 shims are required to adjust caster angle, check for bent or damaged suspension components.
Compare caster settings with vehicle manufacturer recommendations. If caster is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck caster.
Civic Toe-In Adjustment

  1. Secure steering wheel in straight-ahead position. Measure front wheel toe-in. If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in the same direction until front wheels are in straight-ahead position and toe-in reading is correct. Tighten tie rod lock nuts. Reposition tie rod boots if twisted.
  2. Ensure parking brake is released. Check rear wheel toe-in. If adjustment is needed, hold adjusting bolt on rear compensator arm and loosen lock nut. See figure. Adjust rear toe-in by sliding rear control arm until rear toe-in is correct. Install NEW lock nut, and tighten it while holding adjusting bolt.
Wheel Alignment Specifications

  • Camber - Measurement in degrees.
    • Front: 0 (range -1 to 1)
    • Rear: 0.33 (range -1.33 to 0.67)
  • Caster - Measurement in degrees.
    • 1.17 (range 0.17 to 2.17)
  • Toe-In - Measurement in inches (mm).
    • Front: -0 (0)
    • Rear: 0.08 (2.0)
  • Toe-In - Measurement in degrees.
    • Front: 0.00 (range - 0.16 to 0.16)
  • Toe-Out On Turns - Measurement in degrees.
    • Inner: 41.00
    • Outer: 33.50
Torque Specifications Ft. Lbs (N.m)

  • Rear Control Arm Adjusting Bolt: 48 (65)
  • Spindle Nut: 136 (185)
  • Tie Rod Lock Nut: 41 (55)
  • Wheel Lug Nuts: 80 (108)
hope this helps you out.

May 09, 2011 | 1995 Honda Accord

2 Answers

I noticed that the steering wheel was not in its normal position when driving straight down the road


It would be a good idea to have the front end inspected for worn or broken parts. If all is well, have the vehicle aligned. This should rectify the issue and also serve as a good preventative maintenance item as to not wear the tires.

Jan 19, 2011 | 1999 Dodge Grand Caravan

4 Answers

I keep having to replace wheels on my car.... the wheels are wearing unevenly i took it to a guy and he says the that there is a bar under there that keeps the wheels strait up and that bar is bent so my...


was your car in a wreck since you have own it?
that would be the only way anyone could bend steering or suspension parts.if your tires are leaning out on top,
it would be a part called"lower control arm assembly",
if you stand in front of your car with the steering wheel straight,and your tires are pointing in on each side,or pointed out instead of straight,that would be a "tie rod "
there is an inner tie rod and an outer tie rod end.
you need to take your car to a shop that does alignments,and have them tell you exactly what is wrong,you can even get lower control arm assemblies
from a salvage yard.but do yourself a favor and don't take your car to a MONROE or MIDAS type shop,they are only there to sell and make commissions! Find a normal shop that the owner is the mechanic.

Nov 26, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

Specs for the wheel alignment for a 2007 camry grande.


Well your Caster should be +2.2degrees to +3.7degrees Your Camber should be -1.4 degrees to +.7 degree and I recommend it be set at a 0 to a -.3 degree Toe in at straight ahead to toed in 1/16th of an inch.

Apr 12, 2009 | 2007 Toyota Camry

2 Answers

Bump sterring


This sounds like a caster issue, add more caster

Nov 19, 2008 | Chevrolet C1500 Cars & Trucks

Not finding what you are looking for?
1995 Honda Accord Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...