Question about 2006 Honda Element

1 Answer

2006 honda element transmission not shiffting to 3rd gier I have code po970 that is the pressure control solenoid "C" but may is other problem

Posted by on

  • ray1226 Jan 10, 2012

    was a problem fix by honda on the transmission harness was cover on the warranty we only had to paid $200 now is running very well the problem no shiftting.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

I have seen this code several times and usually it is the 3 shift solinoid, I have however had a transmisson that wwas bad and also one with a wiring issue to the solinoid.

Posted on May 23, 2011

Testimonial: "Your replay help a little but was a good intention on your part. My warranty expire on jan-11 I can take the Shift solenoid out but? need know"

  • Mobyz28 May 24, 2011

    I can get you the information on how to change it tomarrow when i go to work i know how to do it, lol but i am not very good at step by sstep explanations. If you want the info let me know.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 ford explorer 4.0. Codes po743 po750 po750 po750 po765 po966 po966 po970. Check engine light and wrench light on. Feels like it is stuck in 3rd gear.


Chances are the transmission being in 3rd gear is a safety feature to help keep you from being stranded on the road.
All of the codes are transmission faults which means you will need to get it to a shop for diagnosis.
The codes are for shift solenoids and torque converter issues.

Dec 06, 2015 | Ford Cars & Trucks

1 Answer

Had starter replaced yesterday now tcs and check engine lights on and the d is flashing hooked up code reader and got code p0798 whats that how do i fix.not having this problem till fixed starter


- Low transmission fluid level
- Dirty transmission fluid
- Faulty pressure control solenoid valve 'C'
- Pressure control solenoid valve 'C' harness is open or shorted
- Pressure control solenoid valve 'C' circuit poor electrcial connection

Read more: http://engine-codes.com/p0798_honda.html#ixzz3YiQY8JvC

The Engine Control Module (ECM) uses signals from the vehicle speed sensor to detect the actual gear position (1st, 2nd, 3rd, 4th or 5th gear). Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical troubles of the shift solenoid valves and valve body.

Read more: http://engine-codes.com/p0798_honda.html#ixzz3YiQOwwGc

Apr 29, 2015 | 2004 Honda Odyssey

2 Answers

I have Honda Accord 2001and I put the scanner this Code come out p1768 what this means


Possible causes
- Clutch Pressure Control Solenoid Valve harness is open or shorted
- Clutch Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Clutch Pressure Control Solenoid Valve

Has to do with the solenoid or wiring to the solenoid inside the transmission. You should have the problem addressed at a transmission shop.

Feb 11, 2015 | Honda Cars & Trucks

1 Answer

P2723 pressure control solenoid


The code relates to a transmission pressure control solenoid that is stuck in the off position. The transmission is then limited to reverse and 3rd gear. You may notice some hesitation or sluggishness.

Good Luck.

Apr 05, 2014 | 2010 Chevrolet Malibu

1 Answer

2006 ford fusion code p 0755


You have a electrical problem , not the transmission !
P0755 Ford Shift Solenoid 2 Circuit Malfunction

CIRCUIT MALFUNCTION . Could be the driver (transistor) in the control module that turns the shift solenoid on > Videos on youtube testing control module driver .

May 07, 2017 | 2006 Ford Fusion

1 Answer

I have a 2002 honda accord, V6 with 42,000 miles,,,yes,,,42,000 miles The check engine light went on, the dealer checked the code "p0780" Replace transmission. Can this be right?


The code you have P0780 is an internal hydraulic problem in the transmission. I did some research on this trouble code and the repair manual Say's to replace the torque converter clutch solenoid valve/shift solenoid valve A, and the A/T clutch pressure control solenoid valves A and B.

In plain English these are the shift solenoids and torque converter solenoids. These solenoids control the fluid flow to the transmission and if they are not working properly then p0780 will set.

The bad news is the repair manual Say's to replace these solenoids and if the problem is still present then replace or overhaul the transmission because the problem is internal.

Most repair shops are not going to take the risk and just replace the solenoids, they will replace or overhaul the transmission.

Feb 15, 2011 | Honda Accord Cars & Trucks

1 Answer

2006 ford mustang we did a code check and it came up with "PO745" Pressure control solenoid malfuntion, the car is slipping from 2gear into 3rd gear. Will I be able to fix this myself or do I...


Try a can of Tranx first. My dodge was doing the same thing 2 years ago. It took a couple of days as I only drove about 30 miles a day. But my transmission hasn't slipped since. And you can fix it yourself. You would have to get a solenoid package for the transmission, several hundred dollars. they don't sell just pressure control solenoid.

Feb 04, 2011 | 2006 Ford Mustang

1 Answer

Transaxle code came up on engine code


P1739 transaxle code, It's a "Problem in 3rd Clutch Pressure Switch Circuit" or sometimes know as Pressure Control Solenoid "C. 
That code is for a 3rd clutch failure. It's an internal problem and there isn't a thing you can do to fix it without pulling the transmission. It's a vesy common code when the transmission starts to go.
Sorry for the bad news and good luck




Apr 19, 2009 | Honda Accord Cars & Trucks

1 Answer

AUTOMATIC TRANSMISSION GEAR SYSTEM PROBLEM


Yes,that code is a transmission code,pressure control solenoid A.On a Honda trans,there are two solenoids that control line pressure inside the trans.The two of them are made together into one assembly that Honda calls "Linear Solenoids".Most likely they are defective and need replacing,but require testing.They are mounted on the outside of the trans case,so the problem can be repaired without removing the transmission from the car.The actual diagnostic route for that trouble code involves ohms checking the wires from the vehicle computer to the solenoids.Ohms checking the solenoids,amps chekcing the solenoids,and then installing a line pressure gauge on the transmission to test the solenoids mechanically.I rebuild Honda and Acura transmissions on a regular basis,and solenoid failure is not out of the ordinary.Good luck.

Sep 13, 2008 | 2007 Honda Accord Sedan

Not finding what you are looking for?
2006 Honda Element Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...