Question about 1991 Honda Accord

1 Answer

I have a bent in rear wheel on my 91 honda accord whats needs to be replaced?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

You need to change the spingle or maybe you need to align the car completely..

Posted on May 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Specific input for 91 honda accord replace p/s pressure hose


what information do you need? To replace a hose, the immportant thing is to get the air out of the system afterwards. with the tires off the road, Fill the reservoir and turn the wheels from lock to lock with the engine off. Then with the engine on repeat the same step. Top off the reservoir as needed.

Nov 16, 2014 | 1991 Honda Accord

1 Answer

Power steering fluid foams up in reservoir, and


you need to replace power steering box the wheel inside is bad

May 25, 2010 | 1991 Honda Accord

1 Answer

What causes continuous clicking with pushing on accelerator in 1983 Honda Accord? Clicking stops with taking foot off accelerator with car coasting. Acceleration is not bad, even with clicking.


I can't remember if those are front wheel drive, or rear wheel, but... if it's front wheel drive, you need CV joints. If it's rear wheel drive, you need U joints.

Jan 24, 2010 | 1983 Honda Accord

1 Answer

Need to hook up stereo in 91 accord but its just open stereo wire


Below is the wiring setup for your car:

1990-93 Honda Accord Stereo Wiring
Constant 12V+ White/Yellow Switched 12V+ Yellow/Red Ground Black Illumination Red/Black Dimmer n/a Antenna Trigger Yellow/White Antenna Left Rear Front Speakers 6 1/2" Doors Left Front (+) Blue/Green Left Front (-) Gray/Black Right Front (+) Red/Green Right Front (-) Brown/Black Rear Speakers 6 1/2" Rear Deck Left Rear (+) Blue/Yellow Left Rear (-) Gray/White Right Rear (+) Red/Yellow Right Rear (-) Brown/White Best of luck,
Greg

Aug 01, 2009 | 1991 Honda Accord

2 Answers

91 accord rear wheel won't spin when put in drive


check the brake, hand brake cable, differentail, driver train. in that order.

May 20, 2009 | 1991 Honda Accord

1 Answer

I have problem mi 91 honda accord ex coupe has vibration when im driving 55 & up im replaced l/f axle,control arm & balance the tires


Is there vibration in steering wheel? Check for bent wheel then check axle...again. Remans are not always good and new ones are just a bit more expensive. Also, check the output shaft bearing for excess play. Also try rotating tires to confirm it's not there.

May 10, 2009 | 1991 Honda Accord

2 Answers

91hondaAcordWagon,somethings is bent but not so bad u can see


Take it to the alignment shop, at a tire store they will be able to tell but may or may not charge you, call around first.

Mar 16, 2009 | 1991 Honda Accord

1 Answer

Soft pedal,30 percent brakage


Air in Brake system need to be bled or master-cylinder is BAD. Noise in rear can be alot of different things NOT related to Soft pedal for example bent backing plate,wheel bearing etc. I would recommend removing brake drum and take a look at brakes in the rear contact if you need more help. Good Luck. Thanks for using FIX-YA

Jan 08, 2009 | 1987 Honda Accord

2 Answers

Relay


My 91 accord had the same problem. There is an electric lock out solenoid under the shift console cover. Remove a couple screws on shifter cover and you will see it. I just bent the tab that contacts the shifter instead of replacing it. Done deal.

Aug 09, 2008 | 1991 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...