Question about 2003 Dodge Stratus

1 Answer

I have dodge sratus 2003 4 door 4 cylinder...it has a problem when i put it into the drive the engine begin to shake and comes up somebody told me it is the problem of mount but i dont know ehat kind of mount

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

Motor mounts, there are mounts that are designed to isolate the vibration from the engine to the body of the car and they do this by having rubber bushings that will deteriorate due to heat and vibration. If they get really bad they can affect the front axles and transaxle, so have it checked out as soon as possible or it could get a lot more expensive.

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003,dogde neon,shakes when in drive,,i put it in netral,it stops?


Hello Greg, It's only a guess, but I think you might have a misfire on one or more cylinders causing your shaking problem. If your check engine light is on you may want to run a code scan.

Aug 28, 2014 | Cars & Trucks

1 Answer

When i start the engine is shaking,when i drive,knoking and shaking its lower.for laguna2.2 dci 2003 year


There could be any number of reasons for this.

- when starting, engine shake might not be firing in one of the cylinders or might have an electrical fault.
- when driving, shake might be due to badly inflated tires, badly balanced wheels, damaged CV boots and joints, worn bushings.

In short, you need to get it to an auto mechanic who deals with Renault to tell you what is wrong. You can ask for a quote to fix it but you don't have to proceed.

You take what you've been told to several other mechanics and tell them what you've been told and ask them how much to fix it.

Good luck.

May 23, 2014 | 2000 Renault 181

1 Answer

Engine revs high in park & neutral


you could have a vacum leak some where in the system that can cause high rpm,also if you have a bad tps(throttle position sensor) it can cause this type of problem.you don`t say if you have check to see what is turning on the check engine light and what code is in the computer.this should have been done and may have help to find the problem in the begining.

Nov 04, 2013 | 2003 Dodge Neon

1 Answer

Where is the thermostat located on a 2004 dodge sratus


On the 4 cylinders it is where the upper hose hooks to the engine
On the 2.5L v6 it is where the lower radiator hose hooks to the engine

Jun 10, 2010 | 2004 Dodge Stratus

1 Answer

I have a 2003 mitsubishi galant ES 4 cylinder and have a check engine light message on i had the code read at auto zone and they told me the third cylinder is misfiring and when it idles it jumps around...


Misfire means you need spark plugs replaced. Or spark plug coils.

That's why the whole car starts shaking because its running basically on 3 cylinders and not 4 as supposed. There is no gas compression on the 3rd cylinder because once again the spark plug is "misfiring"

There also might be even a bigger problem which could be the distributor cap where the coils are connecting outside the engine.
once you fix the problem the check engine will turn off immediately

hope that helps.

May 29, 2010 | 2003 Mitsubishi Galant

1 Answer

Jeep 98 4 cylinders, shakes when on 50milesan hr.


This problem is know as the death wobble. There is no one answer that will fix it. This is a well known problem among jeepers. Do a google search on death wobble and you will find a lot of help, but like I said there is no single answer. If your jeep is lifted, you need to find a really good alignment shop that has experience with lifted jeeps.

Jun 24, 2009 | 1998 Jeep Cherokee

2 Answers

1994 pontiac grand am won't start


did the check engine light come on. if so check the fuel filter and fuel pump.

Jun 22, 2009 | 1994 Pontiac Grand Am

Not finding what you are looking for?
2003 Dodge Stratus Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...