Question about 1990 Toyota Pickup

1 Answer

How to change altinator fuse for 1990 toytoa pick up truck

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

They are weird, you unbolt the positive clamp on the battery and there are plastic tabs on the side of the fuse trio - remove the outer fuses (they just pull out) and undo pop the tab open (like little doors) to reveal small nuts holding that fuse in place-they are like 5 or 6 mm bolts, remove them and the 80 amp fuse comes out.

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have had 4 alternator and four new battery go dead the voltage reg on 3 of the altinators have tested bad changed battery conectors fuses and checked all the wires to and from altinator and battery the...


Look for a loose output wire and connection. If the connection is loose dnd making and braking contact, it will blow the alternator. Also check the alternator ground, making sure it is not making and braking contact. The ground is the attachment to the engine bracket. You may have to add a large black wire from the alternator to the engine frame.

Feb 24, 2015 | Cars & Trucks

1 Answer

I have a 1993 Toyota Celica ST, 1.6. A few days ago my car begun losing power and ended up turning off. I tried starting again after letting it sit and it would make it down the road a few miles before...


To test a altinator the easy way without special tools, start the car, remove the negative battery cable. If it stays running, the altinator is good. I had the same type of problems. It's probably your ignition coil/coils going bad. Try replacing it and cleaning inside distributer cap & rotor.

Jan 11, 2013 | 1993 Toyota Celica

1 Answer

I have a 1990 sx corolla the car won't start the reds on the dash don't even appear but my headlights work and the blinkers the battery is fine and i just changed the altinator what else could


If the warning lights do not come on and the car will not start, I would guess the key switch has failed or a major fuse is blown.
I would check the fuses first, then for power at the key switch.

Sep 16, 2012 | 1990 Toyota Corolla

1 Answer

Car turns over but wont start,checked altinator battery ignition switch distributor fuel filter dnt know what to do


First check for spark at any of the sparkplugs,if you have spark next check fuel pump fuse and relay then check fuel pressure.Turn ignition switch on and listen for pump it should come on for 2 seconds then shut off.

May 09, 2011 | 1990 Chevrolet C2500

3 Answers

1988 Toyota pickup will not start after changing altinator. no lights in dash and will not start. battery charging head lights work great


Check fuse-able links, check by gently pulling apart the wires on either side of the fuse-able links, be sure to try to check them all, it helps to mark the ones you check to avoid constant rechecking and getting "lost" on which ones have been checked. Hope this helps.

Feb 28, 2010 | 1988 Toyota Pickup

1 Answer

Is my voltage regulator in my ECM on my 1990 chrysler imperial. If so can i swap it with one from the junk yard.


Your output regulater for voltage is inside the altinator and if it is bad you will need to replace the altinator or have it rebuilt.

Feb 11, 2010 | 1990 Chrysler Imperial

1 Answer

1991 Dodge 4x4 truck altinator will not charge, new altinator, all fuses are good and serkets. Altinator will not charge.


Change voltage regulator. Does the battery take a charge from a charger? If not, replace battery. If it does, then regulator is faulty. If still nothing, return alternator to place of purchase, and have it checked.

Oct 16, 2009 | Dodge D150 Cars & Trucks

2 Answers

I need a diagram of wiring harness from fuse box to ignition


1990 toytoa celice need to changes fus box how do I do it

Aug 06, 2008 | 1990 Toyota Celica

Not finding what you are looking for?
1990 Toyota Pickup Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...