Question about 2008 Chrysler Sebring

Open Question

How to remove door panel on a 2008 Sebring - 2008 Chrysler Sebring

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1986 Answers

SOURCE: how do i remove the right rear door panel on a 04

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Ad
tommyboinow
  • 324 Answers

SOURCE: Door Panel Remove 2008 Z-06

they are just clipped in, simply pull gently on one of the panel, and you will feel it pop out, you may have a screw or two to remove in the arm rest area.....

Posted on Nov 26, 2008

  • 109 Answers

SOURCE: chrysler 2004 sebring manual

remove the hidden screws be hind mini covers, start from the bottom of panel with panel tool and pry the plastic retainers away from the door plate and remove the wire connectors form switches and replace the handle, reverse the order, GOOD LUCK, RDJRP

Posted on Aug 16, 2009

  • 1986 Answers

SOURCE: window off track driver side 1997 sebring

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 457 Answers

SOURCE: 2010 CHRYSLER SEBRING REAR INTERIOR

when ope door thir are plastic clips that you pop out with a clip remover and take phillips screw out at handle and remove panel

Posted on Aug 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my 2008 Chrysler sebring have two thermostats


there is only one thermostat on your car. what you probably have is split temp control one to set temp for the passenger side and one for the drivers side. if so then the temp control door on the passenger side is probably not functioning properly. take it to a shop to have fixed.

Nov 30, 2014 | 2008 Chrysler Sebring

1 Answer

Remove door panel on 2008 Chrysler Sebring to replace window switch





This pic is of a door panel retainer that hold the panel onto the inner door frame. They are typically placed on the sides and bottom of the door panel. The top of the door panel slides downward into a channel on the top of the door frame.
The first step is to locate all screws on the door panel and remove them. Usually the screws are in the door handle to hold the handle in place. Look for other locations for screws. SOmetimes the screws have button covers that hide the screw head.
After all screws are out , take a wide blade screw driver or you can purchase a tool for door panel removal, and insert the screw driver inbetween the panel and the door, and pry these fasteners out all around the panel. Once the panel is free on the side and bottom, lift up on the panel to disengage it from the top channel. Be careful of the wiring behind the panel. You may have to unplug the wire connectors to remove the panel further.
These panel fasteners become brittle and may break when they are popped out. They are avaiable at auto parts stores. Just take one with you to match up, since there are several differnt sizes.

May 04, 2014 | 2008 Chrysler Sebring

1 Answer

How do i replace a 2008 chrysler sebring convertible drivers side mirror?


remve teh black plastic cover from the door then remove the door panal undo the conector if its power mirror remove 3 10mm nuts revers for instolaton

Feb 13, 2014 | 2008 Chrysler 300

1 Answer

Remove door panel on 2002 sebring


you'll need some special tool as to not damage retainers for door panel,it's complicated to explain make sure you remove all screws ,some are hidden in door handle ,door release handle and under round circuler plugs ,take your time and be careful for wires and connectionc . can i ask YYYYYYYY WHATS WRONG ?

Sep 30, 2012 | 2002 Chrysler Sebring

1 Answer

The inside door handle/ lever on the driver side of my 2004 Sebring will not release the door. The outside door lever works fine. 1) How do I remove the inside door panel? Thanks, Larry


See this link on the same site: http://www.fixya.com/cars/t5231823-remove_drivers_inside_panel_door
The answer isn't for door locks but the procedure for removal of the panel is the same. I just removed the panel on my 2004 convertible this afternoon and followed similar instructions.
DT

Aug 23, 2010 | 2004 Chrysler Sebring

2 Answers

How do I replace a power window switch on a 2008 sebring on drivers door


If the switch has been wet a few times the contacts may only need to be cleaned. If water is a common problem apply dielectic compound to the connections so you don't have the repeated problem.

Nov 28, 2009 | 2007 Chrysler Sebring Sedan

1 Answer

Access to front door speakers


on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.Then you can get to your speaker

Sep 13, 2009 | 1998 Chrysler Sebring

1 Answer

Chrysler 2004 sebring manual, how to remove driver door panel to repair broken inside door handle


remove the hidden screws be hind mini covers, start from the bottom of panel with panel tool and pry the plastic retainers away from the door plate and remove the wire connectors form switches and replace the handle, reverse the order, GOOD LUCK, RDJRP

Aug 16, 2009 | 2004 Chrysler Sebring

Not finding what you are looking for?
2008 Chrysler Sebring Logo

Related Topics:

1,970 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...