Question about Chevrolet Cavalier

1 Answer

I need to get the front passenger side factory installed power window motor out to install a new one how do i do this. after I remove the rifts

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

Rifts? I am assuming you mean rivets, you will need to drill them out and the either rivet the new motor in or bolt it the choice is yours, if you decide to rivet then Walmart carriers the rivet gun and rivets or any hardware/home improvement store. Good Luck Tim

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change the drivers side window motor an an 05 kia sedona


You have to remove the inner door panel to
access the window regulator

You remove the regulator & then the motor from it

You Tube Video will provide a visual of several
similar window motor replacement jobs

Go there-- enter your car,question ,details,etc--- then move
around the site to watch various things

Dec 09, 2012 | 2005 Kia Sedona

1 Answer

Thank yo for the schematic Ernesto. It says Nissan 1996, so is the 2008 still using the same schematic?


It can be issue with motor itself.If its not going up,then how its working down.But still it feels like weak window motor or is issue with power window switch.Get the voltage tested at switch and motor.Also try another working window motor at not working window side.
==========For more troubleshooting i suggest go through the help links mentioned below:-----
Its complete details with troubleshooting steps:------
-------------------
Car windows will go down but come right back up
http://schematicsdiagram.blogspot.com/2011/06/car-windows-will-go-down-but-come-right.html
---------------

Power windows will not go up and relay clicks when switch is pressed?

http://technoanswers.blogspot.com/2012/01/power-windows-will-not-go-up-and-relay.html

-------------

Electric Window Motor REMOVAL and INSTALLATION on ford vehicles?
http://schematicsdiagram.blogspot.com/2011/06/electric-window-motor-removal-and.html
------------
Driver side power window wont go up on ford expedition?
http://howtobyme.blogspot.com/2011/10/driver-side-power-window-wont-go-up-on.html
-------------
How to replace window motor and regulator on jaguar S-Type?
http://howtobyme.blogspot.com/2011/09/how-to-replace-window-motor-and.html
-----------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-----------------
power locks, power window and power mirror on the passenger side not working on Ford Windstar
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
-------------
All power windows not working on 2003 Cadillac CTS?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
-----------------
How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html

--------------How to Remove Electric Window Motor on Acura Integra?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-electric-window-motor-on.html
--------------
How to replace power window motor in car?
http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html
--------------
HOW TO REPLACE A POWER WINDOW SWITCH
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html
-----------
How to Replace a Window Motor
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html
--------------
HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html
-------------
HOW TO REPLACE WINDOW RUN CHANNEL SEALS
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html
------------
HOW TO REPLACE A WINDOW REGULATOR
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html
--------------
How to replace power window regulator for 2006 Dodge Dakot
http://schematicsdiagram.blogspot.com/
------------
How to remove passenger side power window motor on Dodge Grand Caravan?
http://schematicsdiagram.blogspot.com/2011/09/how-to-remove-passenger-side-power.html
------------
How to replace automatic window motor unit for the front passenger side on 2001 jeep grand cherokee
Laredo ?
http://schematicsdiagram.blogspot.com/2011/09/how-to-replace-automatic-window-motor.html

------------

how to replace passenger side power window motor on 2001 Dodge van
http://technoanswers.blogspot
--------------
All power windows not working on mercury sable?
http://technoanswers.blogspot.com/2011/09/all-power-windows-not-working-on.html
---------------
How to replace electric window regulator for mitsubishi 380 ?
http://technoanswers.blogspot.com/2011/09/how-to-replace-electric-window_05.html
-------------
how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html
-----------------
driver side window problem on Mercury Sable
http://technoanswers.blogspot.com/2011/06/driver-side-window-problem-on-mercury.html
---------------
How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html
---------------
how to replace the power window switch on 2005 BMW 325i?
http://technoanswers.blogspot.com/2011/03/how-to-replace-power-window-switch-on.html
--------------
How to replace window switch on bmw?
http://technoanswers.blogspot.com/2011/03/how-to-replace-window-switch-on-bmw.html
---------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
-----------------
How to Replace a Window Switch on a 2002 Ford Explorer ?
http://technoanswers.blogspot.com/2011/02/how-to-replace-window-switch-on-2002.html

-------------

Ford F-150 Power Windows Not Working?
http://schematicsdiagram.blogspot.com/2011/12/ford-f-150-power-windows-not-working.html

--------------

Power windows works intermittently?

http://schematicsdiagram.blogspot.com/2011/12/power-windows-works-intermittently.html

-------------------

Pontiac grand am power window not working?

http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html

-------------

Auto open close feature not working for Toyota Avalon?

http://technoanswers.blogspot.com/2012/01/auto-open-close-feature-not-working-for.html

--------------

Lexus ES300 Power window out of time?

http://repairhelpcenter.blogspot.com/2012/01/lexus-es300-power-window-out-of-time.html

--------------------

Rear power windows not working on Ford Mustang?

http://technoanswers.blogspot.com/2012/01/rear-power-windows-not-working-on-ford.html

-------------

All power windows not working on Ford Explorer?

http://technoanswers.blogspot.com/2012/01/all-power-windows-not-working-on-ford.html

-------------

2003 Chevy impala power windows not working?

http://technoanswers.blogspot.in/2012/02/2003-chevy-impala-power-windows-not.html

------------

Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html

-------------

All Power Windows Not Working

http://whatisbyme.blogspot.in/2012/07/all-power-windows-not-working.html

---------------

1977 Chevrolet Corvette Power Windows Not Working?

http://technoanswers.blogspot.in/2012/04/1977-chevrolet-corvette-power-windows.html
---------------
These details will help.Thanks.

Nov 27, 2012 | 2007 Nissan Frontier SE Crew Cab

1 Answer

How do you install a moter for a right side passenger side on 1987 calais


See Figures 1 and 2

0900c1528025fbec.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Location of the front door window regulator-1995 vehicle shown


0900c1528025fbed.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Exploded view of the rear door window regulator-1995 vehicle shown

  1. Remove the window regulator assembly from the door.
  2. Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.

To install:
  1. Connect the window motor to the regulator with 3/16 in. rivets.
  2. Install the window regulator assembly.

icn_arrow.gifBack to Top

Apr 30, 2012 | 1986 Oldsmobile Calais

1 Answer

Drivers power window controls will not lower front windows but will lower rear windows. Also the passengers front window control will not lower the window. is the power to the front passenger side controls...


Should check all fuses and relays...Including those stored in the fuse panel under the hood. If they are all good, then there is most likely a problem with the power accuator motor / Window Lift Motor or the power control switch inside the drivers door.

To answer your continued portion of your question? Most of todays cars offer the driver the option to open and close all windows from the drivers control panel... Although the first part of your question seems to make that statement null. In other words, you should check your fuses first. before deciding that you need new switched or lift motors for both doors...

This could very well be a fuse problem

Actually I'd be curious to learn if any new features were recently added to the vehicle. such as a stereo, speakers, cd player or an amplifier etc... Since the installer may have not so much tapped into the wrong power feed, in as much as perhaps caused a knick or break in your other wires... Of course this may not be the case at all in the event no such items were recently installed.


Hopefully you find something useful in this

Good Luck and Happy Motoring

Respectfully

Jun 15, 2011 | 2003 Oldsmobile Alero

1 Answer

I want to remove passenger side rear door panel because window is down and won't stay up


Hi,
Hi!!

Here is a little information on how window regulator works. Also step by step instruccions on how to remove and install the window glass.

Door Glass & Regulator Power Windows
Diagnosis & Testing
When the rear window lockout feature is enabled, the circuit is open and no voltage is supplied to the rear window switches. When the feature is not enabled, the circuit is connected to battery positive voltage. If this circuit is shorted to ground when the lockout feature is not enabled, the PWR WDO circuit breaker may cycle continuously OFF/ON until, either the lockout switch is pressed to open the circuit, or the circuit breaker is permanently damaged. All windows may be partially or totally inoperative while the fault is present.
Inspect for aftermarket devices which could affect the operation of the system. Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. Faulty electrical connections or wiring may be the cause of intermittent conditions.
Removal & Installation
Window Motor & Regulator
  1. Position window approximately half way down in the door.
  2. Remove the interior trim panel.
  3. Remove the water deflector.
  4. Tape the window to door frame to prevent it from moving.
  5. Remove the three front door window regulator motor screws.
  6. Disconnect the electrical connector from the window regulator motor.
  7. Remove front side door window regulator motor.
  8. To install, reverse removal procedure.

Window Switch
Front
  1. Remove the front door pull cup screws and pull cup from the front door trim panel.
  2. Disconnect the electrical connectors from the front door power window control switch.
  3. Remove the front door window control switch using a small, flat-bladed tool at the side of the switch.
  4. To install, reverse removal procedure.

Rear
  1. Remove the rear door pull cup from the rear door trim panel.
  2. Disconnect the electrical connectors from the power window control switch.
  3. Remove the rear door window control switch from the pull cup using a small, flat-bladed tool at the side of the power window control switch to release the power window control switch retainer.
  4. Remove the power window control switch from the rear door pull cup.
  5. To install, reverse removal procedure.

Sep 07, 2010 | 2002 Buick Century

1 Answer

I have a 1998 toyota coroloa LE and the passenger side power door locks dont work . I would like to replace them. Also, the power window on the front driver and passenger side dont stay completly up and...


Hello. The power windows each need a new window motor assembly which includes a new track system. The advantage to the assembly is that it is very difficult to remove the motor and install a new one. the power door locks on the passenger side the most likely cause is the power door lock actuator, about a ten dollar part.

Nov 24, 2009 | 1998 Toyota Corolla

1 Answer

How to replace passenger window motor


Door Panels REMOVAL & INSTALLATION Continental 1995–00
  1. Using a small screwdriver, remove the screw cover from the armrest of the front door trim panel.
  2. Remove the two retaining screws.
  3. Using the trim pad removing tool , remove the front door trim panel
  4. Disconnect the electrical connectors.
  5. Remove the front door window regulator switch housing. To install:
  6. Position the front door trim panel on the door, align the two locators on the front door trim panel with the door and reverse the removal procedure.
Power Window Motor REMOVAL & INSTALLATION 1992–00 Vehicles
  1. Disconnect the negative battery cable.
  2. Remove the door trim panel and watershield.
  3. Detach the motor wires at the multiple connector.
  4. Remove the motor retaining screws using Torx® drive bit set D79P–2100–T or equivalent, and separate the motor from the bracket and cable drum housing.
  5. Remove the motor from inside the door. To install:
  6. Position the motor and drive to the cable drum housing and motor mounting bracket. Install the 3 motor screws and tighten.
  7. Connect the power window motor wiring.
  8. Connect the negative battery cable.
  9. Check window operation.
  10. Install the watershield and door trim panel

Aug 31, 2009 | 1998 Lincoln Continental

1 Answer

How do I install a new windows motor- to include the cable drum (drivers side). The old motor burned up and the cable broke. Thanks Hans


You'll need to buy a new motor and regulator. You can go used or new, it's up to you. The regulator will include the cable.

- Remove the interior door trim,
- Disconnect the power cable from the window motor,
- Remove the window bump-stops (one at the front, one back),
- Remove the glass window from the regulator (two bolts),
- Slide the glass window out of the top of the door,
- Remove 3 nuts from the window motor,
- Remove all window regulator bolts,
- Slide the motor & regulator assembly out the top of the door.

- Mount your new motor to your new regulator,
- Install the new motor & regulator assembly in the reverse order.

Jul 27, 2009 | 2003 Hyundai Tiburon

1 Answer

Power window problem. engauges then disenguages


Section 01-11: Glass, Frames and Mechanisms 1997 Windstar Workshop Manual REMOVAL AND INSTALLATION Door Glass and Regulator, Power Windows Removal
svw~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel (23942) and front door inside panel sound insulator (20394). Refer to Section 01-05 .
  1. Remove inside door belt weatherstrip.
  1. Remove front door window glass (21410) as described in this section.
  1. Remove two nut and washer assemblies attaching the window regulator equalizer arm bracket (23230).
  1. Remove four rivets retaining the front door window regulator base plate to door inner panel.
  1. Remove front door window regulator (23200) and front door window channel bracket (23288) from vehicle.
  1. Working on a bench, carefully bend tab flat to remove front door window regulator arm slides from front door window channel bracket.
  1. NOTE: Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket. Make sure rubber bumper is installed properly on new front door window channel bracket, if replacement is made.

    Install new front door window regulator arm plastic guides into front door window channel bracket and bend tab back to 90 degrees.


    a9ef3ee.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive (23394) are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Door Glass and Regulator, Power Windows .

  1. Install window regulator electric drive with preassembled front door window channel bracket into vehicle. Set the regulator base plate to door inner panel using base plate locator tab as a guide.
  1. NOTE: Two 1/4-20 x 1 inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (35-44 lb-in). Equivalent metric retainers may be used.

    Install four rivets to retain front door window regulator to door inner panel.
  1. Install window regulator equalizer arm bracket.
  1. Lower front door window regulator arms to access holes in door inner panel. Install front door window glass as outlined.
  1. Install inside door belt weatherstrip.
  1. Adjust front door window glass to make sure it is properly aligned with glass run. Check window for smooth operation.
  1. Install front door trim panel and front door inside panel sound insulator. Refer to Section 01-05 .


    Door Glass and Regulator
ac1dac5.gif

Item Part Number Description 1 21410 Front Door Window Glass 2 23288 Front Door Window Channel Bracket 3 23394 Window Regulator Electric Drive 4 23230 Window Regulator Equalizer Arm Bracket 5 222A00 Front Door Glass Run Latch Side Retainer 6 N621906-S36 Nut and Washer 7 N800510-S36 Screw 8 23200 Front Door Window Regulator 9 W525172-S Rivet 10 W525175-S Rivet 11 — Wire Connector (Part of 14630 Wire Assembly) A — Tighten to 7-10 Nm (62-89 Lb-In)

Apr 13, 2009 | 1997 Ford Windstar

1 Answer

Installing a Nissan Sentra Passenger Side Manual Non Folding Mirror.


had to install a driver side non folding mirror, fairly simply to say the least. There's a cover on the interior of the door, near the window, remove the cover, remove the 3 screws, need i believe a 10mm socket. If a power window, unhook the circuit. Replace new mirror.

Jul 28, 2008 | 2005 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...