Question about 2001 Jaguar S-Type

1 Answer

How to remove inside, front door panel, 2002 jaguar to look at window track. Sounds as if window has jumped off track

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

You would have to remove the inner handle trim. In side the pull handle is a black cover, remove the philips screws and pop out the panel. There should be clips locking the panel to the doors which may take a little effort to pop them out.
To remove the handle trim and the black cover, you may use a screwdriver and a rag to over it to prevent damages.

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front passenger window has fallen down into door


The window either came unattached from the window regulator or your power window motor's gears inside are stripped, either way you need to take the door panel off to diagnose the problem.

May 26, 2010 | 2000 GMC Yukon XL

1 Answer

Left door


don't know about your trunk...
but for the passenger door, it sounds like the linkage connecting to the outer handle is broken...on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 12, 2009 | 2002 Jaguar X-Type

1 Answer

2000 jaguar s-type driver window will not roll up or down. How do I remove the door panel to put the window back on its track?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to see the motor, regulator, guide rails

Sep 10, 2009 | Jaguar S-Type Cars & Trucks

1 Answer

The window is bending in when it goes up


It sounds like the window has jumped the track and is riding up the outside of the track. As the window moves up, it forces it to a flatter angle and "tips" it inward. No real solution other than removing the inner door panel and setting things straight. While it's open, check for broken pieces, missing screws, etc.

Sep 06, 2009 | 2002 Lexus IS 300

1 Answer

I slamed my door on accident and now the window only rolles up and down about 2 inches. What should I do or look at to fix it?


It sounds as if the window might have jumped off the track when the door slammed. You will have to take the door panel off to be able to see inside the door to determine if in fact it has jumped track.

Jul 06, 2009 | 2002 Chrysler Sebring

1 Answer

Fallen driver's side window


probably need a new window regulator. ebay. 93 to 98 should fit.

Section 01-05: Trim, Interior 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  1. swv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942) .




  1. If equipped with manual windows, slip a clean shop rag between the window regulator handle (23342) and the front door trim panel .
  1. Pull the shop rag back and forth to release the window regulator handle clip.




  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screws from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124) .
  1. Remove the front door trim panel.
Installation
To install, reverse the removal procedure.
---------------------------------------------------------
Window Regulator, Power Front Door
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Remove the front door window glass (21410) . Refer to the front door window glass removal procedure in this section.
  1. Remove the two front door brace bolts and the front door brace.


    415712f.gif

  1. Disconnect the front window regulator electric drive electrical connector.
  1. Remove the four front door window glass regulator track bolts.

    67b6136.gif


  1. Remove the three front window regulator electric drive bolts.
  1. Remove the front door window glass regulator track and the front window regulator electric drive (23394) as an assembly through the opening in the front door (20124) .
Installation
  1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front door .
  1. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
  1. Install the four front door window glass regulator track bolts. Tighten the front door window glass regulator track bolts securely.

Apr 29, 2009 | 1998 Mercury Villager

1 Answer

1988 jaguar and cannot open doors from outside


need to remove the interior door panels and check all the linkages. One of them is a brittle plastic linkage that is famous for breaking, and bits get caught up in the travel path of the door handle. I had taht issue, and rebult all mine with aftermarket plastic linkages, and the metal parts I pulled from junkyard cars. No way to fix it without removing the interior door panels, but that is thankfully a pretty easy job.

Mar 06, 2009 | 2002 Jaguar X-Type

1 Answer

2003 explorer front passenger window regulator/motor replcement


You will first need to remove the door panel on the inside. Then you will need to remove the window glass from the track it rests in. Then you need to undo all the screws that attach the regulator inside the door. At the top of the door where the glass slides up and down remove the inner and outer window track guides. Then very carefully maneuver the regulator up and out the top of the door. Reverse the procedure to replace. It sounds easy, but you need to almost be double jointed to do this. So, have great patience while doing this task. Good luck.

Feb 26, 2009 | 2002 Ford Explorer

4 Answers

Door window on 2000 jaguar s type


take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.

Jul 28, 2008 | 2000 Jaguar S-Type

1 Answer

How do i take the door panel off of a 2002 sonata to repair a window that is off track


Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only). esac050a.gif 2. Remove the quadrant inner cover and the rear view mirror. esac050b.gif 3. Remove the front door inside handle housing. esac050c.gif 4. Remove the front door trim panel. esac050d.gif 5. Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the door lamp connector. esac050e.gif

Jul 25, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2001 Jaguar S-Type Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...