Question about 1992 Buick Park Avenue

1 Answer

All my lamp indicator lights keep flashing. blickers work. when you step on break the break lights work. but when driving no tail lights

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,082 Answers

First replace the tail light bulbs. The tail light and brake lights are different filaments in the same bulb. it is very possible for the tail lights to go out while brake lights still work. And somtimes the tail lights can blow out together.
If you change the bulbs and still dont work then look for other problems.

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No tail lights


no (park -tail-running lights) is dash parking lamps glowing?
check the tail fuse yet?
94 accord
this circuit is huge, park/tail, up to 20 lamps. are all dead>?
front park, side park, tail park and dash lamps all out.
this i the red-blk feed. all comments , USA, as lighting varies by country. (laws)
license plate light dead too????????? that too is park
there is NO RELAY.
the fuse 32 feeds the HL (head light) switch and in PARK posistion
it feeds 12vdc raw power to all 38 lamps. (side corning lamps,etc)
the license plate lamp is key, there are 2 lamps.
and both probably are not out.
so if they are good lamps and both tail lamps are good and fuse
then they must glow, if one lamp shorts as 1156 or the like love to do
then it blows the fuse. as does the trailer jack (option) .

so fuse 32 park/tail blown
or HL park switch bad, if all 20 odd lamps dead. and fuse holds.
that simple, and this cars wiring is very simple and nice.

Feb 26, 2014 | 1994 Honda Accord

1 Answer

Blinker/Tail Light Issue


The Bulbs Have 2 filliments in them if 1 is burnt out that would give you the fast not working tail light there may be an issue with the brake light switch located above the brake pedal on the arm.

May 16, 2013 | 1997 Plymouth Voyager

1 Answer

Driver side indicators glow when pressing the break pedal on a 2001 grand vitara


are you chasing a phantom? (did they say both. or one.>?_
1: its a joke or real, if real 2: the connections are loose or the lamp is intermittent.

Feb 19, 2013 | 2001 Suzuki Grand Vitara

1 Answer

2003 nissan pathfinder blows tail lamp fuse


you got a wiring issue that keeps shorting out fuses find that and that should take care of everything else

Mar 08, 2012 | Nissan Pathfinder Cars & Trucks

1 Answer

2007 Jeep Commander - Rear break light not working and I need to replace it. I can't figure out how to take off the red light covering. I even called a Jeep service station and he was clueless. ...


Open the liftgate, then look along the inside edge of the tail lamp. There should be a couple of fasteners holding the lamp in place. Pull those out, then pull directly backward on the tail lamp. At this point, the only things keeping the it in place are 2 nubs that are behind the tail lamp. You may need to use something (preferably not metal so as to keep from scratching the paint) to help pry the tail lamp backward away from the vehicle. This should be done along the forward-most edge of the tail lamp. There should be a soft popping noise when each nub is pulled out of the rubber socket.

Hope this helps!

Mar 30, 2011 | 2007 Jeep Commander Rocky Mountain

1 Answer

2001 jaguar s type - Right tail lamp failure message.... I replaced bulbs and fuse and tail lights still don't work but the dual element right break light does illuminate when I press the break also right...


There is a harness that you unplugged for the rear tail lamp. Make sure it is fully pressed and locked. This is always the cause on jags for tail lamp failure.

Dec 14, 2010 | 2001 Jaguar S-Type

1 Answer

99 silhouette.all bulbs are in working order.right (not left) signal flashes fast when headlights are on and even worse when brakes depressed(lights on or off).also lights on both rears are real strange on...


I had similar symptoms - rapid flashing of directional when headlights on and brake depressed when making a left turn, both directional indicators in dash light dimly when brake depressed, "Check Traction Control System" indicator On even with ATC turned Off and "strange" indications in tail lights.

Check the pins in the connector at the Lamp Holder Assembly for your Rt. Tail Light for arcing and corrosion. (The female pin is in the vehicle harness connector and the male is part of the Lamp Holder Assembly.) If found, because the male connector is part of the Lamp Holder Assembly, you'll have to replace the Lamp Holder Assembly and the harness section coming in from the vehicle containing the female connector.

I just repaired this problem in the left tail light on my '01 van with a part from a '99 van I found at a local salvage yard.

Jun 01, 2010 | 2001 Oldsmobile Silhouette

1 Answer

2001 odyssey no tail lights but break lights work.


Check the lamps first to see if both are good, do a wiggle test to see if the lamp's socket is good(sometimes they get too hot and the contacts spread open). Next check fuses for the running lights and break lights. If the running lights work on the front but not on the back then its not a fuse its a ground issue. Use a stick or another person to depress the break pedal to check for power at the plug that goes to the stop/running light lamp.





Mar 18, 2009 | 2001 Honda Odyssey

1 Answer

Brake lights dont work, Turn Signals all goofy


First thing i would do is chg. the break light switch, and make sure to chk. all grounds around tailights, sometimes if there is a ground problem it will travel back thru the hot wire to get a ground, witch in turn makes everything go wackey.

Mar 10, 2009 | 2004 Chevrolet Tahoe

1 Answer

My 2001 chevrolet prizm automatic light control not working


is the tone like a tone you hear but diffrent pitch then your blickers?

Nov 20, 2008 | 2001 Chevrolet Prizm

Not finding what you are looking for?
1992 Buick Park Avenue Logo

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...