Question about 2006 Chevrolet Malibu

Open Question

How to remove the dash panel on a 2006 chev malibu. trying to remove the radio

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Swapping out a Stock CD/Radio in a 2005 Chev Malibu Maxx

To get the center console you need to take a lot of the interior dash off. It sounds bad, but there are no real important parts to worry about damaging. Start by removing the silver trim that is just above the glove box. It just pulls off, being attached by pressure clips. Start at one end and work your way over. Next remove the glove box, it is held on by a couple of screws. Open the passenger door and begin removing screws. This exposes a screw holding the center console panel on. The procedure for the driver side is similar to that on the passenger side. After the two screws holding on the center console are removed you can pull off the panel. It is held on by pressure clips. The Driver information center and climate control are held on by a couple of screws. The unit is now readily removable, and much to my surprise there is a good deal of room behind the radio. You can short cut some of the steps at your option, you will have to pull back some the panels to reveal the center console screws, but you risk cracking the other panels in the process.

Posted on Jun 19, 2009

  • 4 Answers

SOURCE: 2006 chev malibu fuses where are they

theres a fuse box under the rear driver side tail light, open the trunk theres a small space to for storage, look underneath it u'll see a "door" open then look for a black box. it flips down, it has ur basic fuse, tail lights, **** like that, all other major ones like horn are under the hood between the driver fender and the battery

Posted on Sep 05, 2009

  • 112 Answers

SOURCE: 2006 chev malibu p0446 code

You need to find out which evap control solinoid is not working the best way is to take it to a shop and have them run a smoke test through the system todetermine which valve or valves are inop,or if there is a break in the hoses.

Posted on Mar 29, 2009

  • 118 Answers

SOURCE: how to change fuses in 2006 chevy malibu

Use the supplied fues puller or a needle nose pliers and pull the old one out and press the new one in. Very simple

Posted on Mar 09, 2010

  • 11034 Answers

SOURCE: replace brake light switch 2006 chev malibu

under dash follow brake pedal up towards steering column the switch is where they meet

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Chev Malibu. Turn key on to start car, won't start. No warning lights on no lights on gauge panel. Radio works, dome light work.


check the ground leg to your engine.. it runs off the neg. battery terminal. will connect to frame and engine.. pull it off, wire brush it put it back.. you radio will work, 'cause it draws much less current, and is grounded in dash.

Jan 11, 2013 | 2001 Chevrolet Malibu

1 Answer

06 chevy malibu daylight sensor dropped into dash


Just remove the windshield pillar moldings and then you will be able to pop up that whole panel that goes across behind the dash part. Then you can reinstall that sensor. Gotta remove the moldings first.

Nov 23, 2012 | 2006 Chevrolet Chevrolet Malibu SS

2 Answers

2006 malibu, brake lights come on while driving.


look up under the dash at the arm for the brake pedal, you will see the brake light switch, make sure it is pushed in enough that the arm is pushing the button in on the switch, a loose switch will cause the lights to come on

Sep 20, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

Replace brake light switch 2006 chev malibu


under dash follow brake pedal up towards steering column the switch is where they meet

Apr 08, 2010 | 2006 Chevrolet Malibu

1 Answer

HOW DO I UNLOCK MY RADIO ON MY 06 CHEVY MALIBU


you will have to take it to the dealer, give them the vin number of your car. once that is set, it is to stop thieves from trying to pawn them. sorry no easy answer on this one, unless you know someone who works at gmc/chev but they will still need all the infor

Feb 03, 2010 | 2006 Chevrolet Malibu Maxx

2 Answers

2006 chev malibu fuses where are they automatic mirror adj, cig lighter and right rear tailight (Break)


theres a fuse box under the rear driver side tail light, open the trunk theres a small space to for storage, look underneath it u'll see a "door" open then look for a black box. it flips down, it has ur basic fuse, tail lights, **** like that, all other major ones like horn are under the hood between the driver fender and the battery

Jun 03, 2009 | 2006 Chevrolet Malibu

1 Answer

2006 CHEVROLET MALIBU MAXX , RADIO LOCKED MESSAGE


Turn off car. Remove the fuse that goes along with the radio, it's under the dash on passenger side. Replace it and turn car back on.

Mar 06, 2009 | 2006 Chevrolet Malibu Maxx

1 Answer

2006 malibu maxx the ac pannel, the "cool" side wont light up blue when the dash lights are on.


Most likely there is a tiny bulb on the inside of your dash panel that needs replaced. Remove the panel if you comfortable to do so, or look to have a mechanic do it.

Jan 13, 2009 | 2006 Chevrolet Malibu

1 Answer

Swapping out a Stock CD/Radio in a 2005 Chev Malibu Maxx


To get the center console you need to take a lot of the interior dash off. It sounds bad, but there are no real important parts to worry about damaging. Start by removing the silver trim that is just above the glove box. It just pulls off, being attached by pressure clips. Start at one end and work your way over. Next remove the glove box, it is held on by a couple of screws. Open the passenger door and begin removing screws. This exposes a screw holding the center console panel on. The procedure for the driver side is similar to that on the passenger side. After the two screws holding on the center console are removed you can pull off the panel. It is held on by pressure clips. The Driver information center and climate control are held on by a couple of screws. The unit is now readily removable, and much to my surprise there is a good deal of room behind the radio. You can short cut some of the steps at your option, you will have to pull back some the panels to reveal the center console screws, but you risk cracking the other panels in the process.

Oct 27, 2008 | 2005 Chevrolet Malibu Maxx

Not finding what you are looking for?
2006 Chevrolet Malibu Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...