Question about Ford Taurus

1 Answer

No fuel supply but i have changed the fuel pump

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Check fuelshutoff-reset, location can be found in owners manual, then check for voltage to fuel pump , then check for spark, no spark no fuel, also check basics , fuses, wiring and grounds

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont start due to fuel supply to carburetor , change fuel pump but no petrol supply yet


check fuses and relays --is pump running --new doesnt mean free from defects or improper installation --fuel filter changed --fuses and relays checked --and check connections and wiring

Sep 21, 2016 | 1997 Nissan Sentra

2 Answers

2009 chevy tahoe fuel pump wont shut off


The fuel pump control module is controlled by the ECM - engine control module , Possibility of DTC'S stored ! You need to take to Chevy Dealer !
The engine control module (ECM) supplies voltage to the fuel pump control module (FPCM) when the ECM detects that the ignition is ON. The voltage from the ECM to the FPCM remains active for 2 seconds, unless the engine is in Crank or Run. While this voltage is being received, the FPCM closes the ground switch of the fuel pump and also supplies a varying voltage to the fuel tank pump module in order to maintain the desired fuel rail pressure.

Apr 22, 2015 | 2009 Chevrolet Tahoe

2 Answers

How do I change the fuel pump in a 2009 GMC Acadia


drop the fuel tank and remove the circle lock. Youll see it when you take the cover off.

Feb 03, 2015 | GMC Cars & Trucks

1 Answer

Fuel supply


check for battery power at the pump. if you have power and you can't hear the pump hum when someone turns the key on and you listen at the tank filler... change the pump. if you hear the pump come on check the fuel filter for clogging and flow.... no flow means bad pump

Mar 31, 2014 | 1995 Toyota 4Runner

1 Answer

Niss. altima changed fuel pump and still starts then dies now whats wrong


check your relays. there is a fuel injector relay and a fuel pump relay. should be universal accessory relay. bout $6 at o'reillys. also could be found at tractor supply.

Feb 22, 2013 | 2000 Nissan Altima

2 Answers

Fuel pump not turning on


wright you have changed the supply fuel system have you checked for a fuel filter or is the fuel getting to the engine if the filter is clean and fuel is getting through then ther is no fuel issue

re spark ie plugs / points / distributor or cap if not electro / leads / coils

Sep 16, 2012 | 1999 Pontiac Bonneville

1 Answer

How do i change fuel pump


Check this Fuel Pump Removal & Installation...
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:
    Negative battery cable Fuel filler and vent hoses Fuel tank skid plate Fuel tank wiring connectors Fuel supply and return lines Fuel tank Fuel pump assembly

1_20_2012_4_25_10_pm.gif

Fig. Fuel pump assembly mounting
Zoom Image link: HERE

To install:

  1. Install or connect the following:
    Fuel pump assembly Fuel tank. Tighten the bolts to 27 ft. lbs. (36 Nm). Fuel supply and return lines Fuel tank wiring connectors Fuel tank skid plate Fuel filler and vent hoses Negative battery cable
  2. Start the engine and check for leaks.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jan 03, 2012 | 1999 Honda Passport

1 Answer

Where do I find the fuel pressure regulator and how to change it on a 2001 hyundai xg300


The fuel pressure regulator is built in to the fuel pump

f89c7c1.gif
Fuel tank and fuel pump assembly—XG 300

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Fuel supply, return and vapor lines
    • Fuel fill and vent hoses
    • Fuel pump module connector
    • Fuel level sender connector
    • Fuel tank straps
    • Fuel tank
    • Fuel pump module
To install:
  1. Install or connect the following:
    • Fuel pump module and torque the mounting bolts to 12–24 inch lbs. (1–3 Nm)
    • Fuel tank
    • Fuel tank straps
    • Fuel level sender connector
    • Fuel pump module connector
    • Fuel fill and vent hoses
    • Fuel supply, return and vapor lines
    • Negative battery cable
  2. Fill the tank with fuel and check for proper fuel pump operation.

Jan 10, 2010 | 2001 Hyundai XG300

1 Answer

Changed feul pump feul filter changed computer. Van still shutdow


this could be a number of problems,check the voltage with a volt meter,not a test light at the fuel pump connection. make sure you have 12V,if so unhook the fuel supply line,turn key to ON not START, and make sure the pump will continue to flow,( obviously cqatch the fuel with a pail,or put a hose on it to pump it into a pail,don't let it leak all over the place.)if the pump continues to flow with out shutting off,your pump,filter,and electrical for your pump is ok.it could be a restriction in the return line,or the regulator may not be functioning.un hook the return line as close to engine as possible,install hose on it and route to a pail to catch fuel,with supply line hooked back up,start van and see if it works,if it keepd shutting off,you've now eliminated return line problems.check the regulator.

Oct 07, 2009 | 1996 Dodge Caravan

3 Answers

No Fuel to motor


It also has a fuse. Have u checked for 12vdc supply at the fuel pump. U will only get this supply when the engine is cranked

Jul 24, 2009 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...