Question about 2006 Jeep Liberty

1 Answer

My 2006 Jeep Liberty will not start. Replaced the battery and it started after boosting the new battery but this morning nothing. There sometimes is a clickbut it won't turn over, the aux. lights will flash sometimes.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 752 Answers

Pull and clean all terminals on starter.

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why has the ESP and BAS lights come on in my 2006 Jeep Liberty?


Doesn't seen like anything, until you road test with
scan tool & look at data

Aug 09, 2014 | 2006 Jeep Liberty

1 Answer

My 2006 jeep liberty won't start. Got a new


Your problem if I got you well has more to do with the security system of your car. I suggest that U take it to qualified personel so they reset it for U. The anti-theft remain remains engaged, that's the one U need rectified.

Aug 25, 2013 | Cars & Trucks

1 Answer

2005 Jeep Liberty, does not re- start, does not crank, no solenoid click.


From your description it seems as if the relay is bad or else the battery is shorting out inside and needs to be replaced. I would change the relay to start.

May 12, 2017 | 2005 Jeep Liberty

1 Answer

My 2006 Jeep Liberty won't start or turn over all I keep hearing is this click sound when I turn the ignition , Plus I just replaced the battery........What shall I check next?


check your starter,better yet has your alarm system been activated and possibly shut down your car a passive alarm will do that

Mar 27, 2012 | 2006 Jeep Liberty Limited

2 Answers

Hi my 2006 Jeep Liberty won't start or turn over all keep hearing is this click sound when I turn the ignition , Plus I just replaced the battery .


Probably a starter. It sounds like the starter solenoid is working, but the starter motor is not energizing.

You could try this simple trick, but Im about 85% sure you have a bad starter.

Have a buddy help you push the vehicle in neutral for a short distance. When you get it moving at a walking pace, put the transmission in Drive, and let the vehicle come to a stop. You may hear a little clicking, but thats OK, it wont hurt anything. Put the transmission back in Park and try to start the engine again. Sometimes the starter gear gets stuck on the flywheel and it wont engage when you try to start the engine. This trick may move the flywheel a little so the starter can engage.

Mar 27, 2012 | 2006 Jeep Liberty

1 Answer

2006 Liberty: My 2006 jeep liberty dies while driving and won't ...


Most common causes of that kind of problem are the fuel pump and the crank sensor. Crank sensor should set a code, pump won't. Less frequent but worth mentioning is the ignition switch. Do some testing using a haynes or chilton manual as a guide,. All you need for that is a digital multi-meter.
Before testing anything, check that all the ground points under the hood are clean and secure. there are more than just the battery to the block...check all the smaller ones as well.

May 05, 2010 | 2006 Jeep Liberty

1 Answer

I couldn't start my jeep liberty '04 this morning. Turned the ignition but all i heard was loud clicking noises, radio and lights could turn on, but couldn't start engine. Thought i had to boost up the...


You either have a battery that has come to its final end or you have a bad connection at the battery posts or chassis ground. I'm not sure of the age of your current battery, but 5 yrs is about the most you can expect (with a quality battery of course). You can have the battery load tested at an auto supply chain for noting if they offer this service. Just a thought.

Feb 10, 2010 | 2004 Jeep Liberty

1 Answer

A few Problems: Starting, Heater & Radio


Problem 1: buy a system heater to keep the engine warm at night.
You can buy them at any autoparts store . You take your pick from the variety.
Place a light 100 Watt Bulb near the battery but not too close to anything else where it might burn anything.

Problem 2. Check your coolant level to see if you have the proper level. Make sure you have 1/2 antifreeze and 1/2 water if you add any coolant /antifreeze and bleed the colant system. By running the car let it cool, then turn the radiator cap or turn the bleed screw provided on some cars near the thermostat outlet. Then adding some more water and coolant etc.The tightening the cap or bleed screw. When radiator is full. Check the radiator and and remove any debris that may be keeping the air out.

Problem 3. Will get fixed because your battery won't die.

Jan 11, 2009 | 2002 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...