Question about 2005 Chevrolet Uplander

Open Question

How do i remove rear brake pads on 2005 chevy uplander

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 82 Answers

SOURCE: 1999 Chevy S10 Blazer 4x4. Replacing rear pad's,& Bleeding Breaks

have one person in the blazer pumping the brake pedal and then hold to the floor, crack the bleeder then tighten, release pedal, repeat till all air is out one side at a time, if this does not work then your ABS unit is bad witch if u follow your lines from your master cylinder u will find a black box with a motor on it, or the master cylinder itself is bad, it also can cause u to have no pedal, replace the master cylinder first, most likely cheaper.

Posted on Mar 11, 2009

Ad
  • 1 Answer

SOURCE: 2005 malibu rear disk brakes

I didn't have a "cube tool", used a pair of channel locks. Worked great. Thanks.

Posted on Mar 21, 2009

  • 39 Answers

SOURCE: rear brake light and taillight out how to remove cover chevy subu

When you open the rear door there should be 2 screws in the door jam holding the tail light in.

Posted on Apr 09, 2009

matney68
  • 426 Answers

SOURCE: how to remove rear brake drum on 2005 chevy

depending on how wore down shoes are or self adjuster has pushed shoes out, you should be able to hit the face of drum with a hammer several tiems and it break loose to be removed.

Posted on Jul 30, 2009

  • 347 Answers

SOURCE: Rear brake pad dragging

ADJUST THE BRAKE CLEARANCE ON ALL FOUR WHEELS.

Posted on Jan 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of ABS sensor on 2005 chevrolet uplander LS


Back side opposite of brake rotor, has wires going to it. Looks similar to this:b26d6b46-44ec-48b4-b88f-8adb84dfcdb5.jpg

Dec 02, 2013 | 2005 Chevrolet Uplander LS

1 Answer

2005 chevy uplander. I put new rotors on the front along with new ceramic brake pads. The calipers have not been a problem so I did not replace them. After doing all of this I now have a heck of a shake...


did you clean the surface where the rotor sit. normaly a vibration while braking is rotor are out of line (pad touch and don't )wave rotor.But clean surface where the rotor sit and make sure the two pins of caliper slide freely. and very important tight wheels nuts to spec torque.

Aug 15, 2013 | 2005 Chevrolet Uplander

1 Answer

PUTTING BRAKES PADS BACK ON REAR BRAKES FOR 2005 CHEVY SILVERADO CRU CAB


did you remove both sides? its fairly simple just got to remember gow you removed them first you have to compress the caliper piston install the bads in the caliper bracket then place caliper over the pads bolt it up the press the brakes befor you move or they will need to be pumped could cause an accident

Jan 19, 2013 | 2005 Chevrolet Silverado

1 Answer

Chevy uplander traction control seems to be working all the time


Can you feel the vibration through the steering wheel if so have your front discs machined & the front pads replaced. Or are you feeling the vibration through the pedal? if so it may be the rear but start with the front.

Jul 15, 2012 | 2005 Chevrolet Uplander

1 Answer

How many lbs. pressure a/c go'es into 2005 chevy uplander van


Empty with front and rear air - probably 2.5 lbs which is more than 3 cans.
There should be a sticker under the hood that says. Maybe in your owners manual too.

Jun 28, 2012 | 2005 Chevrolet Uplander

2 Answers

Need to remove factory overhead rear DVD player in a 2005 chevy uplander


how do I remove my dvd player in my 2006 chevy uplander? I need to replace it and dont want to spend that kind of money to have it pulled out. I dont see any screws or bolts

Nov 20, 2010 | 2006 Chevrolet Uplander

2 Answers

I just replaced the rotors and rear pads on my 06 chevy uplander now it acts like the rear brakes are being applied and the brakes are grinding the rotors! How do I fix?


I beleive the rear calipers are the ratchet style, you have to use a tool to turn the piston so it retracts back into the caliper, if you didnt do this or didnt ratchet them in all the way, then they will be too far out and will cause what you are describing, basically applying pressure to the rotors all of the time. It is also possible that the calipers need replaced if you did indeed ratcheted the caliper piston in all the way originally.

Aug 06, 2010 | 2006 Chevrolet Uplander

1 Answer

We have a 2005 chevy uplander (AWD) with a broken lug nut stud on a rear tire. Looks like we have to get into the reare axle hub. How difficult is this? thanks


I have never done one on this vehicle but have replaced many on all other cars over the years, this is what i experienced, the stud will pound out with a good 2-3 lb. hammer, and the new stud and nut will get pulled back through the empty hole by use of a strong impact wrench...start the stud by hand try to pull it as much as you can through the splined hole in the axle flange, install the new nut backwards on the stud screw it down as far as you can then with the 1/2' drive impact wrench on full throttle tighten the lug nut...by doing this you are pulling the stud through the void hole.
Please remeber to use a small amount of axle grease on the new stud and hole prior to installing the replacement stud and nut.
You prbably have to remove the disc brake caliper and brake pads along with the rear disc brake rotor to gain access to the stud, there should be an access hole also allowing you to get behind the axle flange for removal and installation.
Hope this works.
Happy Motoring!!

Jul 11, 2010 | 2005 Chevrolet Uplander

1 Answer

I cannot get the brakes off the back of a 2005 chevy uplander. How do I get them off?


mcdevito75 here, Sounds like the rear brake drums are stuck, best bet let your local shop handle this job, you can do damage to the brake system.

Jun 17, 2010 | 2005 Chevrolet Uplander

2 Answers

How to compress front brske caliper


YOU NEED TO REMOVE 2/3 BRAKE FLUID FROM MASTER CYLINDER.THEN YOU WILL NEED A LARGE C -CLAMP.OPEN C - CLAMP PLACE C - CLAMP OVER TOP BRAKE CALIPER AND AGAINST THE BACK OF THE OUTBOARD BRAKE PAD. THEN TIGHTEN THE C -CLAMP UNTIL THE CALIPER PISTON IS PUSHED INTO THE CALIPER BORE JUST ENOUGH TO SLIDE CALIPER OFF THE ROTOR.WARNING WHEN FINISHING BRAKE JOB.PLACE COVER BACK ON MASTER CYLINDER.TAKE FOOT PUMP BRAKE PEDAL UNTIL YOU GET SOLID BRAKES.THIS SEATS BRAKE SHOES AGAINST THE ROTOR.THEN RECHECK BRAKE FLUID LEVEL IN MASTER CYLINDER.

Jun 16, 2010 | 2005 Chevrolet Uplander

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...