Question about Dodge Ram 2500

Open Question

2001 dodge van ram 2500 5.2 lt my transmission do not shift to overdrive after we service it , what can be wrong?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mrgreenz
  • 962 Answers

SOURCE: hoe to Replace an alternator on a 1996 Dodge Ram Van 2500 3.9L V6

Remove negative battery cable.
Remove the electrical plug and wireing. Mark them.
Loosen the alternator pivot bolt.
Remove the bolt that attaches the alternator to the adjustment arm.
Rotate the alternator to loosen the drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.
While supporting the alternator remove the pivot bolt.
Remove the alternator from the vehicle.
Do the reverse procedure to install new alternator.

Posted on Feb 03, 2009

Ad
  • 1 Answer

SOURCE: transmission does not always shift into overdrive

Governor pressure sensor or solenoid is going bad. To replace them drop the tranny pan, remove the filter , and the parts are pretty ez to get to. These aren't cheep thou, but replace them as a set. Parts will probly run about $200.

Posted on Feb 20, 2009

greg_margo
  • 1959 Answers

SOURCE: firing order for dodge 2001 ram van 1500,

Here you go:
5.2L and 5.9L engines Firing order: 1–8–4–3–6–5–7–2 Distributor rotation: Clockwise

Diagram link below:

http://www.chiltonlibrary.com/content/images/7924/images/79243g14.gif

Best of luck!
Greg

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: Trouble code P1740 on 1999 Dodge Ram 2500

I had the same code on my 2001 dodge 2500. The truck wouldn't shift from 3-4. I pulled the trans pan off and replaced a broken spring ($2.00). It is behind a thin plate with 3-4 small torq screws. You don't have to remove the valvebody. Only took me 45 minutes to fix.

I would like to give thanks to Jeff Russel from Teal automotive. He said this is a very common problem. He sells any part for any automatic Transmision and his prices are very affordable.
Here is a link to the website.
http://www.tealautomotiveinc.com/

Hope this helps.

Posted on Jul 19, 2009

  • 1348 Answers

SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.

Posted on May 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 2500 Dodge Ram Van with a 5.2 engine. If if do not accelerate hard, the transmission shifts fine. If I accelerate hard, the transmission seems to not want to shift until I relieve pressure...


On most of these type vehicles, with the heavy duty and lower geared transmissions this is normal, when accelerateing hard it will stay in lower gear longer...

Jan 12, 2011 | 2001 Dodge Ram 2500 Truck

1 Answer

Dodge ram 2500 diesel Hard to shift the 6 speed manual transmission,Especially into reverse


The overdrive gear in the transmission is known to move on the output shaft making overdrive hard to shift into & eventually not at all

Sep 10, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

97 dodge ram 2500 van doesn't shift on time from 2nd to 3rd and 3rd to 4th.


it could be any number of things, i would try having the transmission serviced first. the transmission filter could be getting clogged making it work harder and therfore making it shift differently.

Jun 21, 2010 | 1998 Dodge Ram

2 Answers

I WANT TO CONVERT DEGREES INTO FT/LB TORQUE AS MY ELECTRONIC ANGLE TORQUE TOOL CANT GET INTO SOME TIGHT SPOTS SO WAS GOING TO USE TORQUE WRENCH.


I don't think that can be done because a torque wrench measures torque, or tightness. A torque angle gauge only measures the amount of degrees that the bolt is turned in relationship to 360 degrees. Auto Zone has a small torque angle gauge that may work in a tight spot.

Apr 27, 2010 | 2006 Chevrolet Silverado 2500HD 2WD

3 Answers

1997 dodge ram 1500 (360) transmission.


My 95 Cummins Dodge had the same problem and adding "Lucas Transmissiion Fix" cured it completely and permanently.

Thier claim is as follows:


Lucas Transmission Fix is a non-solvent formulas that stops slip, hesitation and rough shifting in worn transmissions and completely eliminates most seal leaks. Use in any transmission for preventative maintenance.Use also in light duty manual transmissions to increase shifting ease and transmission life.
Key Benefits
  • Contains no solvents
  • Lowers operating temperatures and stops foaming
  • Can be added to existing fluid without draining any out
  • Effective in an extremely high percentage of cases

Jan 11, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Auto Tranny slow to shift up tp 3rd. 2001 2500 Van


you may need to change your transmission filter, or adjust the rear band, or replace a faulty shift solinoid

Nov 04, 2009 | 1999 Dodge Ram

6 Answers

1996 dodge ram 2500 auto transmission not shifting properly


Well, first do the service. Pull the pan down and look for metal shavings. If there is metal shavings your in for a transmission. If not, you may have a problem with one of the transmissions shift solenoids located near the valve body.
P.S. The Duramax has the Allison 1000 transmission not the dodge cummins and they are one of the best trannys on the market.

Oct 29, 2009 | 1996 Dodge Ram

6 Answers

Transmission- 2001 Dodge ram 2500 diesel 4X4


I have a 2002 Dodge Ram that doesn't like to shift into 2nd when flooring it from a Stop. Imagine if you were to floor the gas in neutral, the engine REDLINEs and the engine governor kicks in to keep the RPM from blowing the engine......while stuck in first Gear. If i let off the gas, it goes into 2nd fine. I have replaced the Speed Sensor on the transmission ($18) and it seemed to fix it for one day. After 200 miles, its doing it again. ANybody have legitimate answers in here? Its only got 60K miles..wtf?

Jul 07, 2008 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...