Question about 1994 Honda Accord

Open Question

How do i replace my honda accord 1994 ex back break pads

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1994 Honda Accord Ex dashboard removal

You have to remove the console and radio pod. Then remove 2 screws that you can now get to behind the pod. Then pry out the dash light dimmer switch (the one you use to adjust dash light brightness) remove the screw behind it that holds in the gage cluster trim. Then there is another switch on the other side under the cluster (don't remember what it is) and there is another screw behind it. Have fun, LOL!

Posted on Jun 28, 2008

  • 1 Answer

SOURCE: i have 1994 honda accord

buy a speed sensor

Posted on Sep 10, 2008

greg_margo
  • 1959 Answers

SOURCE: Determining if head gasket is blown on a 1994 honda accord Ex w VTec

White smoke out of the exhaust is one indication that the head gasket is blown. Another is to start the car and check the oil on the dipstick. If it's frothy or looks like a milkshake, this is another indication of a blown head gasket. The milky appearance indicates that coolant is in your engine, caused by a bad head gasket. If none of these symptoms occur, then the problem lies elsewhere. Hope this answers your question and feel free to post back with any other concerns or questions. Thank you.
Greg

Posted on May 23, 2009

  • 73 Answers

SOURCE: 1994 Honda Civic Ex Heater doesn't work. Thermostat does

check your fuses

Posted on Aug 26, 2009

  • 72 Answers

SOURCE: I have an 2000 honda accord ex v6 3.0 with reverse gear

IT sounds like your reverse gear is going out, or that you need to have filter replaced my best advise is have your transmission checked out by a transmission shop as soon as possible.

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 honda accord ex number 4 fuse is not blown but my heater controlrely ac clutch relay and cooling fan relay is not working


There is a short in the wireing harness for them , Or a break in a wire Or a wire could of come off,

Nov 09, 2012 | Honda Cars & Trucks

1 Answer

1994 honda accord ex oil pan change


My 1995 Honda Accord EX Transmission was completely sometimes could not drive smoothly and sometimes too slow. Seems like not ingear in motion. A lot of drivers in the free-way hornned me. I got stress out. So tell me to change the new transmission or not!

Jun 03, 2012 | 1994 Honda Accord

2 Answers

1994 honda accord ex pours antifreeze from bleed holes


If the antifreeze is running out of the hole in the water pump housing, you need a new water pump.

Dec 23, 2011 | 1994 Honda Accord

1 Answer

My 94 honda accord ex idles rough when i come to a stop with the brakes applied , almost like it dose when the ac is on.


You need to start using high octane gasoline. Yes the 96 or the 93 not the 89. It costs a little more but it is worth it as it is better for your car and it runs better idling. The brake pads sound "rough" they probably need to be replaced or switched/flipped. This is a cheap and easy task. It may shudder from the fact that it is getting force feedback from the brakes.

Mar 15, 2011 | 1994 Honda Accord

1 Answer

1994 honda accord ex pulling to passenger side at acceleration


Assuming your wheel alignment is perfect...........next thing to check is all the engine and transmission rubber mounting. Any worn or broken mounting should be replaced..........then the problem will be gone. Good Luck.

Mar 22, 2010 | 1994 Honda Accord

1 Answer

Determining if head gasket is blown on a 1994 honda accord Ex w VTec


White smoke out of the exhaust is one indication that the head gasket is blown. Another is to start the car and check the oil on the dipstick. If it's frothy or looks like a milkshake, this is another indication of a blown head gasket. The milky appearance indicates that coolant is in your engine, caused by a bad head gasket. If none of these symptoms occur, then the problem lies elsewhere. Hope this answers your question and feel free to post back with any other concerns or questions. Thank you.
Greg

May 23, 2009 | 1994 Honda Accord

1 Answer

1999 honda accord ex v6


The back brakes on my Honda Accord are disc brakes. After removing the brake cylinder assembly you will see the brake cylinder piston end has a slot in it. The short pin on the back side of the inner brake pad fits into this slot, but also it is used to 'Turn' (clock-wise) the piston back into the cylinder so you fit the assembly back over the new 'thicker' pads. You can not 'press' this piston back into the cylinder.

Nov 30, 2008 | 1999 Honda Accord

Not finding what you are looking for?
1994 Honda Accord Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...