Question about Ford Freestar

1 Answer

Belt will not go on lright - Freestar Ford Cars & Trucks

Posted by on

  • Greg Bernett
    Greg Bernett May 22, 2011

    We need the year/make/model of your vehicle please.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,252 Answers

What make and year and motor size ????

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt


BELT ROUTING DIAGRAM 1997 Mercury Sable 3.0L SFI 6cyl The Belt Routing Diagram

0900c1528025fc65.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 16: Rotate the belt tensioner and...


0900c1528025fc66.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 17: ... remove the belt from around one of the pulleys to remove the belt

WARNING Use caution when removing or installing the belt and make sure the tool does not slip from the drive belt tensioner or personal injury or damage to the belt tensioner and the belt may occur.

  1. Attach a 15mm socket or wrench to the bolt attaching the tensioner pulley.
  2. On all 3.0L (OHV) engines, rotate the drive belt tensioner clockwise to relieve belt tension and slide the belt off the pulleys.
  3. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys.

To install:
  1. Install the drive belt on all the pulleys except the tensioner pulley.
  2. Rotate the belt tensioner as outlined in the removal procedure to relieve belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will occur.

Aug 05, 2012 | 1997 Mercury Sable

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    I would like to get a belt diagram for a 1988 pontiac firebird trans am


    ADJUSTING V-Belts Fig. 1: A gauge is recommended, but the belt deflection may be checked using light thumb pressure 85341063.gif
    Fig. 2: Loosening alternator pivot/adjustment bolt in order to tighten the belt 85341094.jpg Fig. 3: Apply tension to the belt being careful not to damage the case. While holding accessory in this position, tighten the pivot bolt. 85341095.jpg Fig. 4: Using a 1?2 in. ratchet, apply tension to the air conditioning belt while tightening the pivot bolt 85341096.jpg Belts are normally adjusted by loosening the bolts of the accessory being driven and moving that accessory on its pivot points until the proper tension is applied to the belt. The accessory is held in this position while the bolts are tightened. To determine proper belt tension, you can purchase a belt tension gauge or simply use the deflection method. To determine deflection, press inward on the belt at the mid-point of its longest straight run. The belt should deflect (move inward) 3?8 - 1?2 in. (10-13mm). A general rule for alternator belt tension is that the pulley should not be capable of being turned with hand pressure. Serpentine Belt On most newer vehicles, a single belt is used to drive all of the engine accessories formerly driven by multiple V-belts. The single belt is referred to as a serpentine belt. All the belt driven accessories are rigidly mounted with belt tension maintained by a spring loaded tensioner. Because of the belt tensioner, no adjustment is necessary. REMOVAL & INSTALLATION V-Belt Fig. 1: Loosen the component mounting and adjusting bolts slightly 85341064.gif
    Fig. 2: Remove the belt by pushing the component toward the engine 85341065.gif
    Fig. 3: Remove the drive belt 85341066.gif
    Fig. 4: To tighten the belt, pull the component away from the engine and tighten the mounting bolts to specifications 85341067.gif
    To remove a V-style drive belt, simply loosen the accessory being driven and move it on its pivot point to free the belt. Then, remove the belt. It is important to note that on engines with many driven accessories, several or all of the belts may have to be removed to get at the one to be replaced. Serpentine Belt Fig. 5: Serpentine belt tensioner - V6 engine 85341068.gif
    Fig. 6: Serpentine belt tensioner - V8 engine 85341069.gif
    A belt tensioner is used on these models, to maintain proper belt tension. To relieve belt tension, rotate the belt tensioner (using a 15mm socket) to relieve pressure on the belt. With tension relieved, the belt may then be removed from the engine. It is important to note the belt location at each pulley, to assure correct installation, and proper operation of the engine cooling system. A diagram may be helpful in denoting belt positioning. NOTE: Take care not to bend the tensioner when applying torque. Damage to the tensioner will occur. Maximum torque to load belt should not exceed 30 ft. lbs. (41 Nm). prev.gif next.gif

    Oct 14, 2010 | Pontiac Firebird Cars & Trucks

    2 Answers

    How do you adjust brakes on a 91 ford aerostar 3.0 automatic 6 cylinders.


    there is no adjusting brakes you can bleed them ,your best course of action is to take a tire off at a time and check your shoes or pads if your pads are good then you need to bleed your brake starting with the lright rear then left rear then right front then left .

    Feb 03, 2010 | 1991 Ford Aerostar Extended

    2 Answers

    How do i remove a belt from a 2001 hyundai xg300 car


    Removal & Installation
    1. Raise and support the vehicle.
    2. Remove the engine splash shield.
    3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
    4. Remove the drive belt from the alternator.
    5. Slowly release the drive belt tensioner.
    6. Remove the drive belt from the accessory drive pulleys.
    To install:
    1. Install the drive belt to the accessory drive pulley.
    2. Rotate the drive belt tensioner clockwise.
    3. Install the drive belt to the alternator.
    4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
    5. Slowly release the drive belt tensioner
    6. Install the engine splash shield.
    7. Lower the vehicle.

    6a7dc59.gif
    Accessory drive belt routing—1.5L engine

    09edb85.gif
    Accessory drive belt routing—2.0L engines

    750e1de.gif
    Accessory drive belt routing—2.4L engines

    8b223d7.gif
    Accessory drive belt routing—2.5L and 2.7L engines

    5315739.gif
    Accessory drive belt routing—3.0L and 3.5L engine

    Oct 17, 2009 | 2001 Hyundai XG300

    1 Answer

    How do I change the timing belt on a 2003 Tiburon


    2003 Hyundai Tiburon 2.7L MFI DOHC 6cyl

    Inspection
    Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
    Removal & Installation
    1. Raise and support the vehicle.
    2. Remove the engine splash shield.
    3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
    4. Remove the drive belt from the alternator.
    5. Slowly release the drive belt tensioner.
    6. Remove the drive belt from the accessory drive pulleys.
    To install:
    1. Install the drive belt to the accessory drive pulley.
    2. Rotate the drive belt tensioner clockwise.
    3. Install the drive belt to the alternator.
    4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
    5. Slowly release the drive belt tensioner
    6. Install the engine splash shield.
    7. Lower the vehicle.
    b3e0cbe.jpg

    Fig. Accessory drive belt routing-3.0L and 3.5L engine


    4a6b54d.jpg

    Fig. Accessory drive belt routing-2.5L and 2.7L engines


    3b0d2d5.jpg

    Fig. Accessory drive belt routing-2.4L engines


    6470b70.jpg

    Fig. Accessory drive belt routing-2.0L engines


    6d43bf5.jpg

    Fig. Accessory drive belt routing-1.5L engine


    508cf9b.jpg

    Fig. Accessory drive belt routing-3.0L engine


    99b1d12.jpg

    Fig. Accessory drive belt routing-2.5L engines


    97529b0.jpg

    Fig. Accessory drive belt routing-2.4L engines


    5cd1383.jpg

    Fig. Accessory drive belt routing-1.8L and 2.0L engines


    3e72758.jpg

    Fig. Accessory drive belt routing-1.5L engine


    2aafa70.jpg

    Fig. Accessory drive belt routing-2.4L engines


    aa6cd2c.jpg

    Fig. Accessory drive belt routing-2.0L engines


    4081274.jpg

    Fig. Accessory drive belt routing-1.5L engine


    I hope help you with this (remember rated this help) Good luck.

    Sep 15, 2009 | Hyundai Tiburon Cars & Trucks

    1 Answer

    How to change engine belts on a jaguar x-type 2003 3.0


    To Remove BELTS : Drive Belt :
    Disconnect battery ground cable
    Remove wheel and tire
    Detach accessory drive belt
    detention drive belt
    detach accessory drive belt
    Remove accessory drive belt
    slacken the tensioner
    remove accessory belt drive

    Install in reverse order
    WATER PUMP BELT : Remove battery tray
    Remove water pump belt
    De-tension water pump belt
    Remove water pump belt

    Installation in reverse
    Hope this is helpfull

    Jul 11, 2009 | 2003 Jaguar X-Type

    1 Answer

    Cant find 97 ford taurus serpentine belt diagram


    Drive Belt Replacement ani_caut.gif WARNING: IF EQUIPPED, DO NOT ALLOW DRIVE BELT TENSIONER (6B209) TO SNAP BACK AS DAMAGE TO DRIVE BELT TENSIONER OR PERSONAL INJURY COULD RESULT.
    NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt (8620) are considered normal and acceptable. If the drive belt has chunks missing from the ribs, the drive belt should be replaced.

    NOTE: Conditions requiring drive belt replacement are excessive wear, rib chunk-out, severe glazing, frayed cords or other conditions. Replace any drive belt exhibiting any of these conditions.

    NOTE: When installing drive belt on pulley, make sure that all V-grooves make proper contact with pulleys.



    q1834c.gif

    Drive Belt, Serpentine—Except SHO
    Removal
    1. ani_caut.gif WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE THAT TOOL DOES NOT SLIP FROM DRIVE BELT TENSIONER OR PERSONAL INJURY AND/OR DAMAGE TO DRIVE BELT TENSIONER AND DRIVE BELT MAY OCCUR.
      Using a 15 mm socket or wrench on bolt attaching drive belt tensioner pulley, rotate drive belt tensioner clockwise on 3.0L (2V) and 3.0L (2V) FF, rotate the drive belt tensioner counter clockwise on 3.0L (4V) to remove drive belt from pulleys. Make sure spring keeper engages into slot.


      Drive Belt Tensioner—3.0L (4V)


      q3759a.gif

    Installation
    1. Install drive belt over all pulleys (except drive belt tensioner).
    1. Rotate drive belt tensioner as described under the removal procedure and install drive belt over drive belt tensioner pulley. Make sure that all V-grooves make proper contact with pulleys. Make sure spring keeper releases or improper belt tension will occur.


      Pulley, Routing—Accessory Drive Belt 3.0L (2V)/3.0L (2V) FF Engine


      q3244d.gif


      Item Part Number Description 1 10300 Generator 2 6C348 Idler Pulley 3 3A674 Power Steering Pump 4 19703 A/C Compressor 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 8501 Water Pump 8 8620 Drive Belt

      Pulley, Routing—Accessory Drive Belt 3.0L (4V)


      q3735a.gif


      Item Part Number Description 1 3A674 Power Steering Pump 2 8501 Water Pump 3 19703 A/C Compressor 4 8620 Drive Belt 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 10300 Generator
    3.4L SHO Engine
    Removal
    1. Remove the right front wheel and tire assembly. For additional information, refer to Section 04-04.
    1. Remove the inner fender splash shield.
    1. Remove the alternator shield.
    1. ani_caut.gif WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE WRENCH DOES NOT SLIP FROMDRIVE BELT TENSIONER OR POSSIBLE PERSONAL INJURY AND/OR DAMAGE TO DRIVE BELT TENSIONER AND DRIVE BELT MAY OCCUR.
      Using a 3/8 inch ratchet on the lifting lug, rotate drive belt tensioner counterclockwise (upward) and engage spring keeper. Remove drive belt from drive belt tensioner.
    1. Lower vehicle.
    1. Remove drive belt.
    Installation
    1. Install drive belt over all pulleys (except drive belt tensioner ).
    1. Raise vehicle on hoist.
    1. Rotate drive belt tensioner , as described under Removal procedure and install drive belt over drive belt tensioner pulley. Make sure all V-grooves make proper contact with pulleys. Make sure the spring keeper is released or improper belt tension will occur.
    1. Install the alternator shield.
    1. Install the inner fender splash shield.
    1. Install the wheel and tire assembly. For additional information, refer to Section 04-04.


      Pulley Routing—Accessory Drive Belt, 3.4L SHO


      q3736a.gif


      Item Part Number Description 1 3A733 Power Steering Pump Pulley 2 6B217 (RH) Idler Pulley 3 19703 A/C Compressor 4 8620 Drive Belt 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 10346 Generator 8 6B217 (LH) Idler Pulley 9 6B217 (Center) Idler Pulley
    Drive Belt, Water Pump
    Removal
    1. NOTE: If removal of the water pump drive pulley is required, refer to Section 03-03.

      Rotate drive belt tensioner clockwise by hand and remove drive belt from drive belt tensioner .
    1. Remove drive belt from water pump drive pulley and water pump pulley.
    Installation
    1. Position drive belt onto water pump drive pulley and water pump pulley.
    1. Rotate drive belt tensioner clockwise by hand and install drive belt over top of drive belt tensioner pulley. Make sure all V-grooves make proper contact with pulleys.


      Pulley Routing—Water Pump Drive Belt


      q3737a.gif


      Item Part Number Description 1 6B209 Drive Belt Tensioner 2 6A312 Crankshaft Pulley 3 8501 Water Pump 4 8620 Drive Belt

    Jun 01, 2009 | 1997 Ford Taurus

    1 Answer

    Belts


    depends on the engine...3.3 has 1 belt
    3.0 has 2 belts a serpentine belt and an ac belt
    2.5 has 3belts a waterpump belt an ac belt and a power steering belt

    Nov 15, 2008 | 1995 Dodge Caravan

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    13 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    fordexpert

    Level 3 Expert

    5495 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...