Question about 2000 Chevrolet Blazer

1 Answer

My drivers side window wont roll down. Are there any fuses or small things i need to check? Dont want to order a new window motor if i dont have to. 2000 chevy blazer 2door

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,585 Answers

If the other window is working , I would take it apart first and check voltage at the motor plug and check the window regulator, this is the part that holds or attaches the motor. If these are good then I would get the motor. If you don't have power to the motor plug then work your way back to the switch.

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My drivers side window will not roll up. Is there a seperate fuse for it on a 2003 lincoln town car?


the fuse is the same for all,if you can check the contacts on the switch for that window/also the connector that plugs into the switch itself,they can be corroded,oxidation electricity can not pass through,for the switch itself you will see little tabs that lock the switch inside its own housing pop the switch out and get inside the same way the buttons have two brass contacts(1up)(10down)you will see tiny contact buttons clean where they touch each other & put a die electric lube or spray with pb blaster liquid wrench lube once cleaned & lubed it should work,for the connector do the same to clean it,an emory board nail shaper that woman use will also work for both with some trimming,now for the motor itself?did it start to go up slower & then eventually quit if so unplug it clean those contacts for the plug if after all things are done & still no window function the window motor burned out(slower than others and then it quit)if it's the motor you will see three brass torx screws take those out & you will feel a wheel with a cable wrapped around it,hold that wheel & cable tightly & pull on the motor to seperate them,put it back the same way,the window goes up & down by the wheel & cable,so thats the shabang for you in the easiest order electrical contacts first motor second have fun

Dec 29, 2012 | 2003 Lincoln Town Car

2 Answers

2006 mazda 6 just fitted a new battery now one touch power windows dont work


I had the same thing happen when I replaced my battery on my 2006 mazda 6. The program has to be re-programed and it is very simple. Simply push the window button down until window rolls all the way down, then pull up and roll window back up, but dont let go fo the window button for 3-5 seconds after window rolls back up all the way. This resets the program. Do it to both driver and passender side windows and do it with the key in the on position, but not with the motor started. Hope this helps ya

Aug 12, 2010 | 2006 Mazda 6

1 Answer

MY 2006 DOdge ram Thunder Road's windows dont work. They used to work i bought the truck new. All of a sudden all the windows from every control dont roll down their own windows as well as the driver side...


your truck also has power relays working with the fuses. each door has its on circuit except the main controller in drivers side door. if u cannot control anything from drivers side then look at the relays for possible cause to your problem.

Apr 22, 2010 | 2006 Dodge Ram

2 Answers

Power window switchs on 1996 gmc jimmy


Inspect or replace the window lock and unlock switch on the drivers door power window switch. There is a lock and unlock switch that will disable the switches to the other power window in the Jimmy. Check to make sure that switch is in the unlock position to have the other power window switch to work.
Thank you for suing fixya and good luck.

Apr 19, 2010 | 1996 GMC Jimmy

2 Answers

Drivers side door on 1998 jeep grand cherokee stoped working ,doors wont lock , window wont roll down , mirrors dont work , is there a fuse to check ? and where , i know where the fuse box is dont know the...


I have the same problem. Do not know cause but I remove large red 50 fuse in engine compartment fuse box, wait 15 sec and replace. Lock car and unlock. This seams to reset something and car is fine. This problems seams to appear when my battery is low.(?)

Oct 26, 2009 | 1998 Jeep Grand Cherokee

2 Answers

Rear driver side window won't roll down on 2003 lexus es300


I had the same issue with the passenger side rear window. I took the panel off (one screw under the window switch and one screw located behind the door handle. There is a small black cover over the screw.) I then took the motor off of the door and track system. After the track was off, I plugged the motor back into the wiring harness and tried the switch. Mine actually worked and the gear spun, if not, it will be a pricey window motor about $150-$250 depending on where you get it. Good luck! Sean

Jun 03, 2009 | 2003 Lexus ES 300

1 Answer

Windows wont go down or up


Check the switches for a clicking sound if you hear a clicking sound then the switches are fine. Does the driver side switch work for the windows? Check it for the click sound. Make sure it isnt a blown fuse. If you have replaced the fuse and you dont hear clicking sound it might be the switches and you can find them at a junk yard. If you have tried all these things and it still doesnt work you might need new window regulators and/or window motors or it might be a wiring problem.

Mar 08, 2009 | 1995 Pontiac Bonneville

1 Answer

2004 ford mustang


this may sound stupid but its only a temporary fix. take the panel off the door and tap the window motor with a small hammer. do all the other windows work? does it make any sound when you hit the button? you probably end up having to replace the window motor.

Feb 11, 2009 | 2004 Ford Mustang

1 Answer

Fuse box diagram


it can't possibly be a fuse if your front windows are working.
i also have a 94 taurus and this same thing has occured, the L-R window won't move at all. but all of my other windows work. it is probably a bad window motor. I've heard a lot about 94's having this problem. take it to the dealer and see if they have any Technical Service Bulletins about this.

Jul 01, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...