Question about Pontiac G6

1 Answer

How to remove the passenger door panel in a Pontiac G6 GT

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

To remove the door panel, remove any screws that are in the vicinity of pull handles and door pockets. These screws will be under little trim covers that you need to prise off to get to their heads. Look for the screws around the edge of the panel and also the screw in the latch release handle recess.
The lock knob, if there is one there, will have to be screwed off and then carefully work your way around the door, freeing the panel's clips from their holes in the door frame. (Doot panels are brittle and clip break out easily).
Finally the panel will probably have to be lifted out if the window slot. (If the panel does not come off, work out what is retaining it and remove that screw or slide it off the clip that is still holding the panel. Disconnect any electrical plugs behind the panel. Under the panel you will find a plastic dust sheet that is stuck to the door frame, remove this carefully, you will have to replace it before replacing the panel.

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Pontiac G6 has weak door lock solenoids/motors on both back doors.


A lot of the time on the rear GM door solenoids the mounting rivets break. Have someone operate the door switch while you look at the linkage rod on either rear door(Door panel removed) Might need to just reconnect the linkage......

Mar 15, 2016 | 2009 Pontiac G6 GT

1 Answer

Where is the power window fuse located, and what number is it


Instrument Panel Fuse Block
25714179-gpkehlvyb00pzwahyaepcp3y-3-0.png
The instrument panel fuse block is located on the passenger side of the vehicle, on the lower portion of the instrument panel console near the floor.
Remove the console cover to access the fuse block, then remove the fuse block cover to access the fuses.
http://www.vadengmpp.com/owners-manual/pontiac/2008-Pontiac-G6.pdf

May 26, 2015 | 2008 Pontiac G6 Sedan

1 Answer

Where is fuse for pontiac g6 gt left side rear turn signal


It typically, should be incorporated in drivers side dash next to inside door panel or in dash below drivers side.

Nov 12, 2013 | 2006 Pontiac G6

1 Answer

2007 pontiac g6 gt convertible passenger door handle broke off i bought new one now i need instruction on how to replace it please help


You need to pull the door panel off, this requires a special tool that reaches between the panel and the shell, then it pulls the fastener out. You then remove any screws that are in the arm rests and trim like pull handles on the inside. Then you can remove the panel. Once that is done you can see a plastic film that covers the door shell and working parts. Remove this. Then you need to remove the hardware that holds the window and associated activators. When that is done, you can access the inside of the door shell and remove the bolts that hold the door handle and put the new one on.

Oct 07, 2013 | 2007 Pontiac G6 GT Convertible

1 Answer

Pontiac 2007 G6 GT drivers door will not open from the inside. How to repair.


There are a series of rods that connect the interior door handle to the actual latch of the door. You are going to have to remove the door panel and inspect the rod from the interior handle all the way to the latch. (Located at the end of the door opposite of the hinge).

Mar 25, 2011 | 2007 Pontiac G6 GT Convertible

1 Answer

Mirror housing replacement on 2008 Pontiac G6


there is a plastic cover on inside of the door you must carefully remove it to access the 13mm hex bolt,that holds the mirror to the car door.if it is a power mirror you must remove the door panel to unhook the wire connector.it would help to know if it is the driver or passenger mirror.

Feb 04, 2010 | 2008 Pontiac G6

1 Answer

I have a 2007 pontiac g6, 4 door. i changed the


Check the wiring on the headlight. You may have a damaged wire or bad ground.

Dec 30, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

Need to remove door panel on a pontiac g6 to replace broken door handle?


I found a great write up on your door panel I think will help you out allot Click Here Its a great sight for any G6 owner. If this was helpful please dont forget to rate me.

Thanks and have a great evening

Jun 11, 2009 | 2006 Pontiac G6

1 Answer

How to remove door panel 2008 pontiac g6


2008 g6 sedan i want to remove drivers door panel?Curt.

Jul 07, 2008 | 2008 Pontiac G6 Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...