Question about 1989 Chevrolet S-10 Blazer

1 Answer

'89 Chevy Blazer is not getting spark to the spark plugs? Its said to b somewhere between the distributer cap and plugs...what could it b?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

It may be the coil that is defective. Based on the info you have provided, I would start testing at this point and move on from there.

Posted on May 22, 2011

  • 1 more comment 
  • lilianna33 May 26, 2011

    It is getting spark from the coil to the distributer cap though

  • GetMeOttaHere May 26, 2011

    Ok, there is only two things that can be the cause; Spark plug wires or the spark plugs.

  • lilianna33 May 26, 2011

    Okay will try more thnx.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy blazer not starting


Check the plug wire from the ignition coil to the distributor cap.
If you haven't already, replace the distributor cap and rotor.
The GM Vortec's have issues with moisture getting inside the cap and rotor and causing problems.

Apr 24, 2012 | 1999 Chevrolet Blazer

1 Answer

Need a spark plug firing order diagram for 1990 chevy s-10 blazer 4.3l


Firing order is 1-6-5-4-3-2. Cylinder numbers are, front to rear: left side (driver) 1,3,5, right side 2.4,6. Distributer numbers are: 1 in front side of cap. numbers run clockwise same as firing order from number one position.


gaker.jpg

Aug 03, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

1992 chevy blazer 4.3 vortec engine 2w dr have change the fuel pump fuel filter spark plugs rotor in the distributing cap ignition coil.and still doesnt want to start only cranks but doesnt stay on.


Check the wireing to the pump they had problems with it it tended to over heat and corroad there is a service bulliton on the prroblem #25215705and a kit with new wires and connector to resist over heating Icould give you the kit # but i got a DELPHI pump and the connector dosn;t fit a chevy pump

Nov 23, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

I need to know the position of the distributor cap for a 1997 4.0 Chevy Blazer SL.


Um....there is a 4.3L in a 97....


18dfbca.gif
1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise

Mar 08, 2010 | 1997 Chevrolet Blazer

3 Answers

My 1986 Chevy S-10 Blazer stopped running while i driving


If your engine timing is good, (meaning the cam is timed to the crank, and distributor) and you have spark and fuel, your engine will run. Try a compression test, and back up and re-test fuel and spark. Make sure the spark works with a HEI spark tester. (Coils can go bad and give a weak spark)

Oct 01, 2009 | 1984 Chevrolet S-10

1 Answer

I need the possition of #1 on the distributor cap


Remove cap. Remove number one spark plug. Turn key off...have friend manualy turn engine over until you feel air blow out of number one spark plug hole. when you feel this look at rotor in distributer...it will be pointing close to number one. Set your wires on cap to coincide with that. Hope this helps:)

Sep 07, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

2000 blazer turns over wont crank


you coul remove the # 1 plug wire (1st on drivers side) and see if your getting a spark. It may need a new distributer cap and rotor.or it just may need new spark plugs. fair warnig I am not a mechanic but have had similar problems like this that I have had to fix myself.

Mar 27, 2009 | 2000 Chevrolet Blazer

1 Answer

89 s10 blazer no spark


There is no test for module in distributor, but they often cause this kind of problem. Also while in there, check the pickup coil wires to make sure they are intact.

Mar 14, 2009 | 1989 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...