Question about Honda Civic

Open Question

Frosts plugs how are they put on the moter - Civic Honda Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the right gap for a plug on a 1999 grand am gt 3.4 moter


SPARK PLUG GAP IS 0.060 FOR THE 3.4L ENGINE.MAKE SURE YOU USE SAME FACTORY SPARK PLUGS.IF SPARK PLUGS WAS PLATINUM THATS WHAT YOU PUT BACK IN.TRY ANY THING DIFFERENT CAR ENGINE WILL RUN POORLY HAVE A LOT OF MISFIRE.

Oct 23, 2010 | 1999 Pontiac Grand Am GT

1 Answer

1999 Yukon AC not working


does the condensor get wet or frost up?? and does the AC vent drip when the AC is on. My thoughts are maybe the blend door that switches from the heatercore to the evaporator is jammed or the moter failed. Also did a shop do the recharge, ??

Jul 29, 2010 | 1999 GMC Yukon

1 Answer

1994 chevy s10 .. moter swapped to carburated and


Actually, I recommend putting an after-market ratchet shifter on the transmission. This sounds weird, but we purposely cut the TPS out of my TH350 for street / strip racing. A ratchet B&M shifter or something similar will work, but it makes destination driving (I.E groceries, family, etc) a bit more of a pain.

Nov 06, 2009 | 1994 Chevrolet S-10

1 Answer

I have drained the oil from my lower unit on my 180 bow rider boat. how do i put the oil back in ? all yhe oil hase drained even from the resivor in the moter compartment . it is a 3litter moter.


Not quite a car question but basically you fill it the opposite way that you drained it. You can purchase a pump at you local marine store that attaches to your quart bottle of lower unit lube.

On the end of the pumps' hose there is a threaded fitting which screws in to where the drain plug goes. leave upper vent plug out.

Pump the oil into the lower unit until it comes out of the upper vent hole.Then remove the hose from the lower unit and quickly replace the drain plug.

Wipe the excess oil off of your hands. :)

Oct 25, 2009 | Chevrolet Silverado Cars & Trucks

1 Answer

Runs really ruff it ant the plugs and wires


some of the parts and what not (ecu ect) my not work on the 92 engine. Check With dealer or on line to see what years are acctually interchangeable. It could be somthing simple like needing to upgrde a sensor or reprograming the computer. Hope this helps

Apr 15, 2009 | 1998 Ford Explorer

1 Answer

Is there any frost plugs between the back of the moter and gearbox on a 1999 au falcon 6 cyl


most 6 cyl and 8 cyl engines have freeze plugs on all sides 4 in the front 4 on the right 4 on the left and 4 in the back

Feb 28, 2009 | Ford Fairmont Cars & Trucks

2 Answers

Frost Plug


The engine freeze out plugs are all one size. The block heater takes the place of a freeze out plug.

Feb 04, 2009 | 1998 Jeep Wrangler

1 Answer

Blower motor 94 dodge intrepid inop


1.disconect battery
2. remove lower right undre panel silencer duct
3. remove the blower moter connector from the resistor block
4. squeeze the blower moter wiring gromment and push the gromment throw the blower moter housing cover
5. remove blower moter housing
6.romove the screws holding the blower moter down
to put back on do the steps back werds

Jan 03, 2009 | 1994 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...