Question about Mazda B2200

2 Answers

Back fires thru carb, dies if i take foot off gas IF i get it to start

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 3,640 Answers

Please go to this site. it should help you with your backfiring.

Posted on May 22, 2011

  • carl May 22, 2011

    SORRY ! heres the web site. myhonestmechanic.com/articles/car-engine-back-fire.shtml hope this helps you.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 797 Answers

Sounds like a timing problem. Back firing through the carb usually indicates that the timing is after TDC instead of before TDC. Not running would be an indication of the same. The normal timing is just a few degree before TDC (BTDC).

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Olds 88 turns over has gas will not fire


Check for loss of spark first.

Jun 02, 2017 | Cars & Trucks

1 Answer

My daughters 2006 aveo wont stay started. it starts every time i crank but after 2 seconds it die.


Start and die, could be issue with security system, where applicable? Any applicable trouble codes? To check codes, yourself, at the least, you need an obd2 code reader. Have you checked for any blown fuses, anywhere?

Feb 22, 2017 | Buick Park Avenue Cars & Trucks

1 Answer

I have an 85 ss Monte Carlo with an edelbroch carburetor. There is fuel getting to it to start however I have to hold my foot on the gas to keep her running as soon as I take my foot off the pedal it dies....


First off you need to stop running it when this problem is present. There is a big chance that it will catch fire and be destroyed. If sounds to me like it is getting too much fuel and you need to remove the carb and rebuild it. This would include a new float because it probably sank.

Feb 19, 2015 | Cars & Trucks

2 Answers

What is causing a back fire in the throttle body? My 93 safari wil run if pumping on the gas but dies as soon as u let off the pedal..


That is usually a timing problem but it could be the carburetor in need of a rebuild. If I remember correct GM was using Rochester Carbs on that model and they are notorious for this problem.

Jun 28, 2011 | 1993 GMC Safari

1 Answer

Car turns over then stalls.


try cleaning the throttle body (use an old toothbrush and some carb cleaner) and disconnect battery for a few minutes. If that doesnt help, you may need to replace the IAC valve. (idle air control)

Oct 12, 2009 | 2001 Ford Mustang

2 Answers

2004 Toyota Corolla, dosnt Idle at all, have to give it gas


I would start with cleaning the MAF sensor and checking the resistance with an ohmmeter. Any shop specializing in imports should be able to tell you what the acceptable resistance parameters are. Use carb cleaner on the contacts, and let it air dry. DON'T try to towel dry it, as this could irreversably damage the sensor. If that doesn't work, I would check the throttle position sensor.

Aug 11, 2009 | 2004 Toyota Corolla

1 Answer

1995 GMC Sonoma with a 4.3L vortec code w.


check for vacuum leak at the intake area,also check EGR vale may be stuck open.

Apr 09, 2009 | 1995 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...