Question about Plymouth Voyager

1 Answer

Right rear turn signal doesn't work. its not the bulb ,fuses ok. right front signal flashes rapidly, so does display signal in the dash. every thing else is ok.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

You need to check to see if you have anyfire in the light socket.Check and see if you have a tail light when you cut the lights on if you dont and you do have powerthen its the ground.Take a wire and touch one end of the wire to a bolt or something that you can get a ground then touch the metal of the bulb while its in the socket. If it works when you do that then look inside of the socket and you will see a littl piece of metal sticking out make sure its not flattened out if it is just pull it out some good luck

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Chevrolet cobalt and the left turn signal will not work the inside light on dash flashes fast. I have changed the light bulb still doesn't work.


Fast flashing usually indicates that one of the exterior bulbs isn't functioning. You've checked front and rear signal lights, right? If the bulb is good, it could be corrosion in the socket, bad ground, broken wire, etc.

Oct 16, 2015 | 2006 Chevrolet Cobalt

3 Answers

I have sourced out all fuses and bulbs, yet continue to have a rapid right turn signal. I don't know where else to look. help?


replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket and working forward.

Mar 29, 2015 | 2005 Chevrolet Uplander

1 Answer

The dash board lights and internal lights on my 2002 Toyota Echo did not turn on while driving home tonight. Also, the left side turn signal is flashing rapidly. Is this a blown fuse and wear is it?


The first thing to do for your dash lights is to verify the fuses, if ok check your lights dimmer next. Sometimes, dimmers fail to provide good contact due to wear or poor filament contact. Otherwise, there is a poor connection somewhere.
Usually, a rapidly blinking turn signal is due to a burnt bulb on the side in question or a bad ground connection either in the front or the back of the vehicle. Turn the left signal on and check if front and back turn lights are on and working if one doesn't work check the bulb. If it is poorly lit and not blinking check the socket and ground connection.
Hope this helps you!
Fernie

Mar 10, 2015 | 2002 Toyota ECHO

2 Answers

Left turn signal doesnt work


its a bulb or a dodgy contact to a bulb ,12v 21watt bulbs not a 12v 6 watt bulb or it will flash faster

Mar 08, 2014 | 2000 Dodge Ram 1500 Truck

1 Answer

Turn signals not working properly


replace flasher, under your dash, its a round, metal cap shaped unit , try that, also, change your rear bulbs, sometimes the ones that work are the problem, check your fuses also !

Mar 25, 2013 | 1998 Dodge Durango

1 Answer

03 chevy venture rt.front parking light&turn light don't work replace bulb&socket


The rapid flashing occurs because of the light problem. If the 20A PARK LP fuse in the underhood fuse block is OK, the front marker lamps and the park lights should turn on when you set the headlamp switch to PARK. If the 10A T/SIG fuse in the instrument panel fuse block is OK, and the ignition switch is on, moving the turn signal multi-function switch to signal a right or left turn should cause the turn signals to flash. If this doesn't happen, check for a missing ground connection to the socket you replaced and check to be sure the replacement lamp was not forced into the socket backwards (it happens).

Sep 17, 2012 | 2003 Chevrolet Venture Passanger

1 Answer

Dodge ram 1500 2007 turn signal malfuction


Good job, and good joe to you for solvin it! Now you'll remember that's a common indicator of a burnt out bulb. For some reason I can't explain, that is how a bad bulb acts on the flasher unit - by more rapid clicking (breaking contact inside the flasher relay at a quicker rate). It seems both the front and rear signal lights have to be working for the normal flasher rate ...well good.

Aug 22, 2012 | Dodge Cars & Trucks

1 Answer

I have a 2006 dodge ram 1500, my right front blinker does not flash, the back right flashes really fast. I checked the front right bulb and it is not burnt out and I cant find a fuse or relay to check.


The fuse for the turn signals is located in the interior fuse panel, usually located under the dash on the drivers side although it may be behind a panel on the side of the dash on the drivers side that you can access when the door is open. The flasher relay is located on or near that fuse panel as well. There is only 1 fuse for the turn signals so if you have some of them but not all of them it's not the fuse. It may still be the relay but I doubt it. That bulb may not look burned but it most likely is. that fast blinking on the right rear is an indicator that the front bulb is burned or not functioning. It is an indicator dodge built into there lighting systems. Replace the bulb, if that doesn't resolve the problem start check the wiring and look for a grounded wire.

May 24, 2011 | Dodge Ram 1500 Cars & Trucks

4 Answers

Looking for location of turn signal breaker unit, left turn signal flashing rapidly


its not the fuse, its either the front or rear lamp is out on that side left or right, or if pulling a trailer you need a heavy-duty flasher unit because this makes the same kind of fast flash problem due to more lamps operated at the same time

Sep 25, 2009 | 2005 GMC Savana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...