Question about 1997 Chrysler Cirrus

1 Answer

I looking for the thermostat to a 1997 chrysler cirrus. do you have any pictures to where its located under the hood of my car..

Posted by on

  • Mike Butler
    Mike Butler May 22, 2011

    2.4L 4cyl, or 2.5L 6cyl?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 799 Answers

Follow top large hose from radiator to its end on the engine. That will be your thermostat housing. The thermostat is located beneath that housing.

Posted on Jun 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the dash lights and taillights on a 2000 Chrysler Cirrus located?


Almost certainly under the hood, in a big black fusebox near the battery, Wendy.

Aug 12, 2014 | 2000 Chrysler Cirrus

1 Answer

Sebring 1997 I need picture to lookat the PCM sensor and the Crankshaft position sensor (CKP sensor)


On 1997 Chrysler Sebring 2.5L MFI 6cyl...
- the PCM is located in the left side of the engine compartment, beside the Power Distribution Center (PDC).

zjlimited_767.gif

Fig. 1: Location of the PCM on the Cirrus, Stratus, Sebring convertible and Breeze models

zjlimited_768.gif

Fig. 2: Location of the PCM on the Sebring coupe and Avenger models

- the Crankshaft Position Sensor is located: under hood, driver side, upper engine area, mounted on end of engine block

zjlimited_769.gif

Fig. 4: Location of the crankshaft position sensor on 2.5L engines

Hope helps; remember to rating this answer and leave some testimonial comments.

Oct 09, 2011 | 1997 Chrysler Sebring

1 Answer

Looking for the fuse that goes to the engine fans


they're in the fuse box under the hood,driver-side ,black box,fuse relay for radiator fan high and low.it also could be your temperature control sensor.located right behind the thermostat housing.

May 18, 2010 | 1997 Chrysler LHS

1 Answer

Where is thermostat in a 1995 chrysler cirrus LX


A tee is located to the right hand side of the intake manifold, on top you should see the coolant system cap, its silver in color and is about 2-3 inches in diameter. This tee is the thermostat housing, it goes to your radiator and engine block, remove it from the block and you should see the thermostat. Remember when replacing the thermostat, the spring side goes into the block! 2.0L and 2.4L it is under where the upper rad hose hooks to the engine. 2.5L it is under where the lower rad hose hooks to the engine.

Dec 29, 2009 | 1996 Chrysler Cirrus

2 Answers

1997 Chyrsler Cirrus (Water Pump) I have change out the thermostat and have come to the conclusion that the water pump needs to be replaced. Which pulley is the water pump and how difficult is it to remove...


i just replaced my water pump on my 2.5 1997 chrysler cirrus. if your mechanically inclined and patient it can be done. if you're ready i'll try to help you ok.

Dec 20, 2009 | 1997 Chrysler Cirrus

1 Answer

My 98 chrysler cirrus is lesking water and im told


First open the hood of your car and check where the leak is coming. Thermostat gasket is one source but
it could also come the radiator, radiator hose, or the
water pump. Check all these items, and you can do
the repairs by replacing the defective parts. Except for
water pump that really needs a mechanic to replace the
bearings and the mechanical shaft seal.

Oct 09, 2009 | 1998 Chrysler Cirrus

1 Answer

1996 CHRYSLER CIRRUS LX A/C COMPRESSOR WONT KICK ON CANT FIND ALL THE FUSES


Look under the hood on the drivers side of the engine compartment next to the air box for your filter. Two black covers there that have fuses and relays.

Also, on the drivers side of the dash on the end (I think). Look there too.

Let me know what you find.

May 07, 2009 | 1996 Chrysler Cirrus

1 Answer

Chrysler 1997


jess this could be several reasons for that first check all belts for tention then check water pump and then check thermostat that it is not stuck in closed postion.make sure you have no leaks at hoses.hope this helps you.

Feb 22, 2009 | 1999 Chrysler Cirrus

1 Answer

Blinkers and hazzards not working


hi possum , looks like #6 fuse , 20 amps , is for the combination flashers , looks like the location is when you open the driver door , end of the dash panel pops off , and there are other fuses under hood next to air filter box , has a cover on them . hope that fix ya

Jan 03, 2009 | 1997 Chrysler Cirrus

Not finding what you are looking for?
1997 Chrysler Cirrus Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...