Question about 1999 Ford Windstar

1 Answer

Put new window motor on. Worked for a few minutes and start hearing clicking noise again. Also back lights on passengers side donot work. Brake lights and back-up lights work. Put in new bulbs, didn't help the problem. HELP!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check your r.e.m.(rear electronic module) should be located right rear near jack have to remove 3 bolts that hold jack bracket move foam and you should see r.e.m.

Posted on May 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

The passenger side window started temporarily stop working when the car was started. After a few minutes of the car running it would begin to work again. One day it it just stopped working all together....


Had the same problems with the passenger window motor and the airbag light. For tgeh window, the magnetic bushings were worn down on mine and had to replace the entire unit. About a 2 on a 1-5 difficulty scale. The part itself can be found on eBay for about $45 inc. S

Sep 08, 2010 | 2003 Hyundai Tiburon

2 Answers

Window has stopped working in spite of new motor


the window is off the track,try a glass shop they can get the glass back on the track and spray a dry silicone.

Jul 26, 2010 | 2003 Hyundai Tiburon

1 Answer

Central locking / door locks fault


http://www.honestjohn.co.uk/forum/post/?t=69400

May 02, 2017 | Peugeot Liberte Cars & Trucks

2 Answers

200SX SE Nissan 1996, making weird noise on passenger side


a little tip for you...it sounds like the pads are squealing, try taking the pads out and applying a very thin film of high temperature grease on the rear of the pads (NOT TO THE FRICTION SIDE), this may seem a bit of an odd thing to do, this tip was passed down to me by an old mechanic friend of mine years ago,and it works every time for me.

Apr 01, 2009 | 1991 Peugeot 505

1 Answer

Power window not working


it sounds by the motor clicking that your power window motor is shot.....If you jump 12 volts to the terminals on the motor does it work?.................if it does you can at least get it up.......if you put the power to it and it goes down reverse the wires on the terminals and it will go up.But it sounds to me like you need a new one.
hope this helps!..............Good luck!

Jan 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Power window failure on 2002 Pontiac Grand Prix GT


Most likely the window motor brushes are sticking, but in any case the door panel must be removed to service the motor

Nov 21, 2008 | 2002 Pontiac Grand Prix

2 Answers

2001 Bonnevile, wont start.


you have to pull up on the back seat and it will come up

Nov 11, 2008 | 2001 Pontiac Bonneville

3 Answers

2000 GMC Jimmy SLE driver's power window


The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.

Sep 27, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
1999 Ford Windstar Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...