Question about Chevrolet 1500

1 Answer

How to put back togather a tension holder came apart when replacing pully

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

If you are refering to the spring loaded tensioner, you can not. Once it has come apart there is no fix. Replace the unit. They range from $35 - $75 depending on where you purchase it. Take the pulley back as the new tensioner will come with a new pulley usually.

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the spec on installing a tension pully for a 2003 ford taurus


Not sure what spec your looking for. I replaced the tensioner pully on my F-150 302 last year though. And basically the bolt is left hand thread and turning the bolt gives the slack in belt needed to take belt off, and put back on. Hope this helps.

Apr 14, 2014 | 2003 Ford Taurus

1 Answer

Replace ilder pully


Need to disconnect battery, then use a breaker bar to remove tension, remove belt, remove defective part, put back together.

May 15, 2012 | 1998 Plymouth Voyager

1 Answer

Replace serpimtine belt


pull tensioner back to release tension on belt ,,make sure you write on paper how belt goes on vehicle,make a diagram,remove belt,put belt back on the same coming off,move tensioner back so you can get belt back on,,,tensioner looks like a pully with a bracket that moves,should be 3/8 ratchet type insert or wrench style to move tensioner

Nov 24, 2010 | 1999 Ford Taurus

1 Answer

Replace bearing to pulley tensioner


Remove belt, remove tentioner ,remove bolt holding pully on,replace pully and bearing,put tentioner back on, put belt back on.

Apr 11, 2010 | 1997 Saab 900

1 Answer

Ho0w do you replace the power steering belt on 1996 dodge avenger


there should be a tension idler that has to be retracted to give the belt slack most has a 1/2 inch square hole in it for a break over bar to fit in it to realese tension however i have not delt with this particular model but most are the same also be sure to carefully look at how the belt pattern is or if it still has the sticker for belt routing on it realese the tension and slip belt off first pully making sure not to put yoru finger between the belt and the pully after the first pully has been cleared the the tensioner can be released and the belt removed then put new belt on all pullys but one at this point tensioner bust be realesed again ultill belt is plased on last pully be suer belt is inline with all pullys

Mar 27, 2010 | 1996 Dodge Avenger

1 Answer

How to fit a cambelt on a volvo s60 t5


remove drivers wheel then plastic wheel arch then put jack under engine and remove the engine mount then take off fan belt and timing belt cover mark your two top cam pullys and the crank pully then remove your belt and tensioner put new belt and tensioner on making sure all your marks line up then put on the crank pully and turn engine over twice by hand using a ratchett on the crank pully bolt if it turns over and your marks still line up put it all back together and start the car

Mar 14, 2010 | 2002 Volvo S60

1 Answer

How do you change a tension system on a 1999 chrysler town and country the engine is a 3.8


if your set to do it. First you have to dismantle the front of the motor. then unload the tension pully. unbolt the water pully the steering pump. then the tensioner. replace here's where it get hard in the small space you'll have to put tension on the ten to put belt back on. broke hand here.

Dec 06, 2009 | Chrysler Town and Country Cars & Trucks

2 Answers

Fix a cambelt on a freelander


start by removing top front camshaft cover ,revealing camshaft sprockets. now jack veihcul up and place on stands. remove left hand front wheel (cam belt side) . remove power sterring belt and alternater belt.looking at crankshaft pully and using an 18mm socket and bar rotate pully until all three marks line up. crank on 1st timing mark and and cam marks facing each other when all three line up you can then remove crankshaft pully , you will need an impact wrench that can torque up to 300lbs .when pully has been removed you can then remove the lower belt cover you will then see the belt tensioner and unbolt and remove , now place a jack with protection under sump and remove bolts on engine mount, when you have separted the 2 halves of the engine mount you can remove the belt and install new belt , k,series cam holder tool is use full for re-alineing cam marks camshaft marks facing each other and crank line up with raised mark on engine block,it is then a case of putting every thing back inthe same order it came off.there are 2 type of cam belt tensioner you can email me and i will tell you how to do each type. marcusloud@blueyonder.co.uk.

Sep 11, 2009 | 2002 Land Rover Freelander

2 Answers

I NEED TO KNOW HOW TO LOOSEN THE PULLY'S SO I CAN CHANGE OUT MY ALTERNATOR


There shouold be a tension pully.. This pully keeps tension on the belt..
Put a wrench on the nut at the center of the pully.. You should be able to put pressure on it to move it and releasing the tension..

Jul 09, 2009 | 1995 Ford Mustang

1 Answer

Cant put on belt right


from front of engine looking back,belt around bottom of crank pully,water pump is just above,left side of belt comes around water pump going counter clock wise,put belt over alternator,then straight across to a/c compressor,(make sure belt goes under any idler pullies,smooth side of belt to smooth side of pully)find your belt tensioner,pry back on tensioner(be carefull)and carefully place belt under roller pully of the tensioner,release and check allignment of belt prior to starting.oh ya make sure belt is in good condition.

Mar 01, 2009 | 1991 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...