Question about Dodge Dakota

Open Question

I need the diagram for wiper arm linkage for 92 dodge dakota am replacing and need to see how linkage goes back together

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 97 nissan sentra windshield wiper linkage arm disconnected

Most likely you will have to replace the wiper linkage from the center pivot to the left or drivers-side wiper pivot. The plastic piece in the linkage gets brittle over time and breaks down. To save a hassle in the future, replace both linkages. It should be under $20.00 for parts.

Posted on Sep 14, 2008

Ad
  • 1 Answer

SOURCE: shifter linkage came apart from transmission shift arm

I had the same problem and also linkage inside the car. I took ball joint apart and cleaned the surface then put silicone inside ball joint. Joined the two together then I put plastic tie wraps for wiring around the ball joints, two per ball joint. Let sit for 24 hours and it worked. It is probably temporary but it got me out of a $165 an hour repair job 500 miles from home. Hope this works for you as it tightens up the linkage and worked great. CW

Posted on Apr 22, 2009

motor1258
  • 6674 Answers

SOURCE: 3.9 engine. spark plug wires inadvertantly got removed from distributer cap and not sure how they go back on.

moz-screenshot-1.jpg

Posted on May 31, 2009

  • 194 Answers

SOURCE: 1994 dodge dakota firing order diagram

Does it have the firing order embossed on the intake manifold?

Posted on Sep 07, 2009

  • 7353 Answers

SOURCE: 1993 Dodge Dakota Windshield wipers stopped

There are bushings that go bad. They are available from a parts store. Ask or look under the HELP! section. the cowl panel will need to come off. replace ALL of the bushings.

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do you replace wiper linkage


You must remove both wiper arms,open hood and remove metal vent panel that runs the width of the vehicle.You will see where the arm has falling off ,replace all bushings(4).NAPA carries them.

Sep 02, 2014 | 1995 Dodge Dakota

1 Answer

For '92 Dodge Spirit wiper assembly - where the arms come together in the center under grill - is that a rubber gasket, or a ball joint, or what ? that holds the 2 arms together? There is no keeper...


It is a plastic bushing that holds linkage together you can get replacement bushings from auto parts store like sitelogo_orly.gif

They can look it up in there books and get the right bushing to put it back together.

May 12, 2011 | 1992 Dodge Spirit

2 Answers

Wind sheild wiper arms wont stay on


I have a 92 since new 18 years,last month. Never had that problem and just put new ones on two weeks ago, before going to inspection. I suspect you have the wrong wiper arm. Can not put it on wrong

Feb 09, 2010 | 1992 Dodge Dakota

1 Answer

How do i install a new wiper motor on my truck?


you have to remove the cowl (panel under wiper arms) by removing the wiper arms and taking off the screws in cowl. The wiper arms need to be pulled away from windshield then you slide the clip at the base over and pry the wipers off. Under the cowl is a screen you remove. Then you can get to the wiper linkage. You can pop off the linkage with a prybar or a big screwdriver. Once it's off you take the bolts holding the motor out unplug the connector and reverse order for installation. The linkages can take some serious manhandling to get back on!

Feb 07, 2010 | 1993 Dodge Dakota

1 Answer

1993 Dodge Dakota Windshield wipers stopped working suddenly. The motor still works, the wipers had lost their adjustment and were slamming the trim on the windshield last couple weeks. Is there a common...


There are bushings that go bad. They are available from a parts store. Ask or look under the HELP! section. the cowl panel will need to come off. replace ALL of the bushings.

Oct 28, 2009 | 1993 Dodge Dakota

2 Answers

As I was driving my 92 Dodge Dakota with the wipers on, I heard a sound and they stopped moving. I can hear the motor running. Do you have a suggestion for this and what parts might be needed to fix it?


had the same problem with mine all you need is a windshild wiper bushing it bout 5 to 10 $ at auto zone there are about 2 or 3 bushing that may need replacing mine was simplest one the one on the motor its easy it justs snaps onthe motor arm and than to the arms of the windshild transmistion

Oct 15, 2009 | 1992 Dodge Dakota

2 Answers

Wiper motor does not work on my 1994 dodge intrepid?


REMOVAL & INSTALLATION
(I made images larger at the end of instructions)

See Figures 1, 2 and 3
0900c1528006ad4a.jpgFig. 1: Unbolt the wiper motor from the housing 0900c1528006ad4b.jpgFig. 2: A little maneuvering may be required to pull the motor out 0900c1528006ad4c.jpgFig. 3: Exploded view of the wiper motor and associated components that make up the wiper system
  1. Disconnect the negative battery cable.
  2. Remove the wiper arm and blade assemblies, then disconnect the in-line hose connections. Do not discard the in-line connectors.
  3. Remove the rear hood seal with the cowl top plastic screen. Disconnect the washer hose in-line connectors.
  4. Disconnect the motor wiring harness at the back side of the housing.
  5. Remove the four wiper housing module mounting screws, then remove the housing.
  6. Remove the nut and disconnect the wiper drive linkage from the motor crank.
  7. Remove the three motor mounting screws. Lift the motor and mounting plate out of the housing.
  8. Disconnect the motor harness grommet from the housing.
To install:
  1. Assemblethe linkage to the motor. Make sure that the crank fits over the D sloton the motor shaft. Tighten the mounting nut to 90-106 inch lbs. (11-14Nm). Be sure the motor is still in the park position before assemblingto the linkage; if it is not, temporarily connect the motor to thewiring and operate the switch to park the motor before assembling thelinkage.
  2. Position the wiper motor and install the retaining nuts until snug.
  3. Attach the linkage drive crank to the motor crank arm.
  4. Plug the wiper motor wiring back together.
  5. Install the wiper motor cover.
  6. Install the wiper arms and plastic cowl removed previously.
  7. Connect the negative battery cable and check the wiper motor for proper operation.

0900c1528006ad4a.gif
Copyright © 2002 Delmar, All Rights Reserved.
0900c1528006ad4b.gif
Copyright © 2002 Delmar, All Rights Reserved. 0900c1528006ad4c.gif
Copyright © 2002 Delmar, All Rights Reserved.

Jan 29, 2009 | 1999 Dodge Intrepid

4 Answers

Windshield wiper arm disconnected


My dad helped me solve this problem on my truck...

They simply pry off. He put down a towel to protect the cowl grill, took a hammer (using the split end) and pried them right off.

There was no mechanism holding them on, when we were done working under the grill, we used the same towel, but the other side of the hammer to stick 'em back on.

Nov 26, 2008 | 1991 Dodge Ram 150

9 Answers

97 nissan sentra windshield wiper linkage arm disconnected


Most likely you will have to replace the wiper linkage from the center pivot to the left or drivers-side wiper pivot. The plastic piece in the linkage gets brittle over time and breaks down. To save a hassle in the future, replace both linkages. It should be under $20.00 for parts.

Jul 13, 2008 | 1997 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...