Question about Chevrolet 1500

2 Answers

How to rear axle on chevy express van 1500 - 1500 Chevrolet Cars & Trucks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,428 Answers

You want to know how to remove the axle correct ? There are clips inside the rear carrier that hole the axles from running out . You need to remove the the bolts on the back of the rear carrier but make sure that you can get the fill plug out first so you can put oil back in it . The clips come out like nothing you can do it with your fingers you need to replace the seals and look at the axle shaft and condution of the bearings replace as required also check to see if the vent is clear on the carrier the oil is heavy and expands alot this will blow the axle seals . The older it is the more likely it is that you need axle s or bearings but you will need new seals if you remove the axles

Posted on May 21, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,252 Answers

Remove the cover on rear end
turn the differential until you can reach the differential pinion shaft lockscrew. remove the lockscrew and the pinion shaft.
push in on the axle end. remove the C-lock from the inner (bottem) end of the shaft.
remove the shaft, being careful of the oil seal....Hope this Helps???

Posted on May 21, 2011

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1810 Answers

SOURCE: 2000 CHEVY EXPRESS 1500 VAN. BUZZER/CHIME RINGS

locate chime under dash and remove it

Posted on Jan 13, 2010

BCAS1298
  • 3092 Answers

SOURCE: 2001 chevy express van 1500,

Inside the van, all the way to the rear, on the side, will have a nice looking panel over it, remove panel and you'll see blower motor, held on with about 6 small screw's.

Posted on Aug 05, 2010

duane_wong
  • 6826 Answers

SOURCE: How do you change the

Axle Shaft Bearing & Seal Removal & Installation To Remove:

  1. Raise and safely support the vehicle.
  2. Remove the axle shaft.
  3. If replacing only the seal, remove the seal using a suitable seal removal tool.
  4. If replacing the seal and bearing on the 8.6 inch axle, install the slide hammer and adapter behind the bearing and pull out the bearing and seal together.
  5. If replacing the rear axle shaft seal and the bearing on the 9.75 inch axle, install the J 29712 or equivalent bearing puller into the axle housing behind the axle bearing.
  6. Remove the axle shaft seal and the bearing by tightening the nut on the J 29712 bearing puller.
Use a slide hammer, bearing puller and adapter to remove the old axle bearing 88457g81.gif

To Install:
  1. Install the axle shaft bearing using a suitable size driver. Drive the bearing into the housing until the tool bottoms against the tube.
  2. Lubricate the seal lip and install the seal with a suitable seal driver. Make sure the seal is fully seated in the axle tube.
  3. Install the axle shaft.
  4. Fill the rear axle with the correct lubricant.
  5. Lower the vehicle.
prev.gif next.gif

Posted on Oct 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix rear wheel bearing on 2002 chevy express van 1500


Remove the rear differential cover. You will see a large pin in the center that has to be removed, spin the diif until you see the bolt that holds it in. The pin should just slide right out. Assuming tires are off. Push the axle towards the center. On the end of the axle is a c clip that has to come out. Magnetic works well for these. Pull the axle out. Remove the bearing. There are special tools to get them out.

Dec 26, 2015 | Cars & Trucks

1 Answer

2000 chevy 1500 express van turns over but won't start when it rains


the high humidity (water) is attacking your electrical starting system, whens the last time you changed your spark plug wires , distributor cap & rotor ? how about your fuel & air filters ? cleaned your battery terminals ? try it , it will help !!!!!!!!!

Mar 01, 2013 | Chevrolet Express Cars & Trucks

1 Answer

2006 chevy express 2500. While changing the brakes on my van, a rivet and clip pulled through the rear wheel dust plate, I'm unsure on how to fix this as now one half of the shoe is rubbing agains


get a washer welded in its place but if you dont want to go that way you will need to pull the brake shoes the drive axle just to get to the backing plate so you can remove the old one and install a new one

Jan 16, 2013 | 2006 Chevrolet Express

1 Answer

How do you change the rear wheel bearings on a 2004 chevy express 1500 van?


Axle Shaft Bearing & Seal Removal & Installation To Remove:
  1. Raise and safely support the vehicle.
  2. Remove the axle shaft.
  3. If replacing only the seal, remove the seal using a suitable seal removal tool.
  4. If replacing the seal and bearing on the 8.6 inch axle, install the slide hammer and adapter behind the bearing and pull out the bearing and seal together.
  5. If replacing the rear axle shaft seal and the bearing on the 9.75 inch axle, install the J 29712 or equivalent bearing puller into the axle housing behind the axle bearing.
  6. Remove the axle shaft seal and the bearing by tightening the nut on the J 29712 bearing puller.
Use a slide hammer, bearing puller and adapter to remove the old axle bearing 88457g81.gif

To Install:
  1. Install the axle shaft bearing using a suitable size driver. Drive the bearing into the housing until the tool bottoms against the tube.
  2. Lubricate the seal lip and install the seal with a suitable seal driver. Make sure the seal is fully seated in the axle tube.
  3. Install the axle shaft.
  4. Fill the rear axle with the correct lubricant.
  5. Lower the vehicle.
prev.gif next.gif

Oct 18, 2010 | 2004 Chevrolet Express

1 Answer

2001 chevy express van 1500, rear blower motor location


Inside the van, all the way to the rear, on the side, will have a nice looking panel over it, remove panel and you'll see blower motor, held on with about 6 small screw's.

Aug 05, 2010 | 1999 Chevrolet Express

1 Answer

2000 chevy express 1500 van having starting issues


Start with fuel system. Listen for fuel pump humm at fuel tank No humm check wiring to pump for power. Then check for spark at plugs and wires. Remove wire from coil and hold near engine and see arch when you crank. No arch. Replace ignition Modular inside distributor cap or cap or rotor

Feb 04, 2010 | 2000 Chevrolet Express Cargo

1 Answer

I need a diagram of fuse box for 2000 Chevy Express Van


i have a 2000 Chevy van where is the fuse for the two(2) rear power outlets

Oct 30, 2008 | 2000 Chevrolet Express Cargo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...