Question about 1994 Saturn Sl

1 Answer

I have a 94 Saturn SL1 stick shift. i bought a replacement radiator online. It looks exactly like the old one, except the metal (transmission or A/C?) fittings that are on a separate smaller radiator originally are on the new radiator. Do I connect the lines to the new radiator and discard the auxillary radiator?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,252 Answers

If the auxillary transmission cooler is not in the way of the new radiator, if it was me, i would leave it..It will cool the transmission better. no need to plug line holes in new radiator. Hope this Help you??

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil filter for 2000 saturn sl1 2.2 liter


How come looks like paper,should be metal one.

Mar 29, 2013 | 2000 Saturn SL

1 Answer

Can I use parts from a 2004 Saturn ION in my 1998 Saturn SL1?


sl1 and ion are NOT the same car the only thing that will work from the ion are the rims sorry for the bad news

Mar 12, 2017 | 1998 Saturn SL

1 Answer

My 2000 Saturn sl1 recently showed codes po733 and po734.What exactly does this imply and where would I start if I wanted to try fixing the problem myself?


po733- gear 3 ratio incorrect, po734- gear 4 ratio incorrect. this is how to fix. You can try replacing the shift solenoids inside the transmission as long as the trans fluid is nice and clean looking. If the trans fluid is dark or burnt looking, it time for a new tranny if you need further assistance please let me know and i will be glad to assist you. Thanks, Midwest-Tek

Aug 28, 2010 | 2000 Saturn SL

1 Answer

WANT TO PUT A 1996 LS -1 SATURN, MANUAL TRANSMISSION AND MOTOR INTO A 1995 LS-2 SATURN BODY AND CHASSIS. WILL I HAVE TO CHANGE THE COMPUTER? DOES THE DESIGN CHANGE FROM 95 TO 96 EVEN MAKE IT POSSIBLE...


There isn't much difference between them. The SL series didn't change between 95 and 96 except for the ecm is OBD2 on the 96. Are both cars stick shift? The difference in the SL1 and the SL2 are the cams. 1 for sohc and 2 for dohc. So what you are asking is can I take out my dohc motor and install a sohc motor right?

Apr 24, 2010 | Saturn SL1 Cars & Trucks

1 Answer

How do I replace the gasket and transmission oil in a 1998 Saturn SL1?


simply unbolt the trans pan under the trans and the oil falls to the ground... clean the pan with clean rag. get all old gasket off.. place new gasket in and bolt the pan back into place. tighten the bolts to around 7 lbs. do not over tighten the bolt, you could strip the threds. put new trans fluid in through the dip stick hole that you check the level.

Jan 31, 2010 | 1993 Saturn SL1

1 Answer

Don't know what warning light means


What exactly does the warning light look like? It is probably the transmission warning light. The transmission uses the radiator to cool the transmission fluid. You need to have your cooling system serviced on a 10 year old car. Drain, flush, fresh coolant, new thermostat. A full service. Keep driving and you may end up with a transmission repair. Good luck.

Nov 17, 2009 | 1999 Saturn SL

2 Answers

2002 Saturn SL1 - Losing reverse and second gear


The simple answer is that there are two loose nuts in the transmission.

The output shaft nuts are loose. The are behind a cover that you can see through the driver's side wheel well.

Jul 04, 2009 | 2002 Saturn L-Series

1 Answer

Saturn SL1 Shifter to Shiftstick


I had the same problem over a year and a half ago. I went to the closest Saturn dealership to get the replacement plastic piece. Turned out that the ENTIRE shift cable assembly was the smallest part that could be purchased to repair this. The cable assembly was over $200 at that time. I opted to forgo the ridiculous expense for this tiny little plastic part. True story: with a little heavy safety wire and a large washer I jury rigged the washer to hold the end of the shift cable in the fitting at the bottom of the shift stick. The washer acts as a keeper and the wire, wrapped in a basket around the back side keeps everything together. It still shifts reliably, a little looser than when it was new, but I saved $200 in parts (99% of which weren't broken) and probably a couple of hours of labor at least. One end of the cable assembly has to be attached to the transmission by the way and is not easily accessible. Sounds hokey but it really worked, still works!

Mar 08, 2009 | 1998 Saturn SW

Not finding what you are looking for?
Cars & Trucks Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...