Question about Plymouth Voyager
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
The same thing happened to my 2006 Aveo. Once you do the above find the lock and the screw that holds it in (they will both be in the bottom of the door). Put the lock back in place, put blue Loctite on the screw and screw it back in place and this problem will not repeat itself.
Posted on Aug 24, 2009
There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and remove the screw holding the handle to the door. Look through, where door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift the panel in an upward direction.
Posted on Nov 14, 2009
SOURCE: driver side door panel removal
Generic instructions to remove door panels:
1. Remove the screw(s) in the trim behind the door release handle and remove the trim.
2. Look for the screws in the arm rest and remove. Remove the arm rest.
3. Look for other screws (possibly under caps) and remove them.
4. Insert a wide flat blade between the door panel and the door. Find the plastic tabs which hold the panel to the door and gently pry the panel away from the door. Make sure you work as close to these plastic tabs as possible to avoid ripping the panel.
5. Work your way around the door prying the tabs out of the door.
6. When everything is free, gently lift the door panel straight up and out of the door.
7. Disconnect the electrical wires, and you are done.
8. There is a vapor barrier between the door and panel which must be gently peeled out of the way in order for you to gain access to the window and door latch mechanisms.
Posted on Jan 20, 2010
just pop out the triangle piece from the top at the top front of the door panel with a flat head screwdriver. Then simply pop out the door lock cover from the aft side and the door handle cover from the aft side as well. Then pop up your cap containing the auto door locks and windows and disconnect the cannon plugs. Then just remove 2 screws (1 from under the door lock/window cap and one just insde the door handle itself. You'll then life up and towards you to remove the panel. Don't pull it too far out because you'll still need to disconnect the speaker cannon plug and pull out the door open light at the bottom aft of the panel. You can then set the door panel off to the side.
Posted on Jan 27, 2010
Tips for a great answer:
Feb 19, 2015 | 1995 Plymouth Voyager
Dec 10, 2012 | 1995 Plymouth Voyager
Jun 02, 2011 | 1998 Plymouth Voyager
May 18, 2011 | Plymouth Voyager Cars & Trucks
Mar 02, 2011 | 1994 Plymouth Voyager
Oct 13, 2010 | 1998 Plymouth Grand Voyager
Jul 17, 2010 | 1996 Plymouth Grand Voyager
Jan 24, 2010 | 1999 Plymouth Voyager
Sep 29, 2009 | 1999 Plymouth Voyager
Aug 14, 2009 | 1997 Plymouth Grand Voyager
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: