Question about 2002 Audi TT

1 Answer

Rear view mirror came off while cleaning windshield. Can't seem to be able to figure out how to POP it back on the base attached to the windshield. Help?

Posted by on

  • neomatrix7 May 21, 2011

    The diagram provided helped. There was no spring for this mirror as mentioned in the response. The key to getting it back on was placing at a 20 degree angle and then turning while pressing down firmly clockwise....reverse to remove it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

If you are referring to the "Inside" Mirror:

This is a little hard to put together
Be sure you have the Retaning spriing on (sometimes it gets lost)
Put parts together & turn Mirror bracket to fit in snu, then turn bracket

You could download the complete procedure from :-

http://www.mediafire.com/?c4tjbtxcwa7ltve


You need to have acrobat reader to view the file.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do i remove a rear view mirror


check for a small screw at the base of the part that attaches to the windshield loosen it the mirror should slide up and off the shoe is glued to the windshield.

Oct 27, 2015 | 2007 Jeep Commander Rocky Mountain

1 Answer

Seperate rearview mirror from plate both came off


f

Replacing the rear view mirror on a Ford Explorer is easy. The only obstacle you might encounter is fear of breaking the glued metal plate off the windshield. Do not sweat it. You can buy glues at the auto parts store to reattach the mirror to the windshield (Difficulty: Moderately Easy).

Instructions:
  1. Tap gently at the base of the mirror where it slides on over the metal plate glued to the windshield and pull upward. Some rear view mirrors have a small Allen screw that tightens the base of the rear view mirror to the metal plate. Disconnect the electrical plugs if your rear view mirror has them.
  2. Pull the rear view mirror clear of the metal plate. Clean around the metal plate glued to the windshield. If the metal plate has come off because of harsh weather or from hammering too hard at it, reattach it with glue designed for this job.
  3. Clean the area where you will be attaching the metal plate on the windshield. Apply the glue evenly on the surface of the metal plate that will go against the window. Be sure to clean and scrape off all the old glue before applying the new glue. Gently push the metal plate against the windshield in the spot you wanted it and hold tight for five minutes.
  4. Wait a day before putting the base of the mirror or replacement rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. Reconnect your electrical plugs and tighten the Allen screw if your new mirror has one. Adjust the mirror according to your safe viewing preference

Hope help with this (remember rated this help). Good luck.

Mar 12, 2010 | 1999 Ford Explorer

1 Answer

How do you remove rear view mirror from windshield


For your mirror, you'll need to grab the base and rotate it to the side about 90 degrees (not the mirror backing, but the part that mounts to the windshield). You'll then need to pull very gently and it should pop out. It should be similar to changing a light bulb.

Oct 05, 2009 | 1998 Volkswagen Beetle

1 Answer

How do you remove the spring clip on the rear view mirror?


Most rear view mirrors are secured on a pivot point to an arm and that arm is then secured on a pivot point to the base. The base is then attached to the windshield anchor either via a screw (metal housing) or it will have a lil tab (plastic housing) that you pull back and slide the entire assembly off of the windshield anchor

Aug 20, 2009 | 1995 Chevrolet Lumina

1 Answer

Re-assembly of 99 Blazer mirror to windshield


This is a relatively easy task, the bulk of the work has been for you. The rear view mirror assembly simply slides onto that metal block that was glued to your windshield. Your mirror mount (the part that slides onto the metal bracket) may be cut differently or shaped different from the rest of that part. you simply need to line that up with the metal mount on your windshield. slide the mirror on and tighten down the set screw if you have one. I've listed the steps below

1. find the base mount for your mirror (this is the bottom of the mirror that sits on the windshield)

2. look for a cut out or flat part of the mirror base.

3. line the flat part of the mirror base with the metal mount bracket on the windshield.

4. slide the mirror onto the metal bracket (this may require you to wiggle while you slide the mirror onto the metal bracket).

5. tighten the set screw on the mirror base ( this is important because your mirror will vibrate off the bracket if you don't.

Note some mirrors slide from the bottom of metal mount bracket and some slide from the top. it sort of depends on the manufacturer and/or the way the bracket was installed.

Hope this helps

Aug 04, 2009 | 1998 GMC Jimmy

1 Answer

Reattach rear view mirror


there is a small alan screw in the base of the backup mirror. loose it and slide the mirror back on to teh base on the windshield and tighten down the alan screw.

May 12, 2009 | 1994 BMW 3 Series

1 Answer

Rear view mirror came off of the round base on the windshield


it depends... #1 if the mirror came off and there is a little metal bracket still on the windshield, then there is a little screw at the bottom of the mirror (T20) this needs to be losened, the mirror slid over the bracket (top to bottom) then the screw retightened. #2 if the little metel bracket is still in the mirror and has come off the windshield then it needs too be glued back onto the windshield.(try the local glass shop). #3 if one of the mirror knuckels has come apart you need a special tool to snap it back together. this only works 80% of the time and makes it weaker and easier to pop off again, if this is your problem and you do not have access to the 'special tool' I suggest buying an new mirror. (again check local glass shop or wreckers,$25-30ish)

Jan 05, 2009 | 2000 Pontiac Grand Prix

1 Answer

How do I re-install the rear view mirror?


If it goes directly attached to the windshield, you will have to remove a metal piece of metal from the mirror base. This will have to be glued with epoxy glue to the windshield holding it it with tape overnight. After this you can put the mirror back.

Jul 05, 2008 | 1988 Subaru GL-10

Not finding what you are looking for?
2002 Audi TT Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14184 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...