Question about 2007 Toyota Yaris

Open Question

I need to remove the rear left side light cluster on a Toyota Yaris (8 years old), i was changing blown bulb and it dropped into the cluster housing.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: rear flat tire on toyota

This may sound offbeat, but you may have to kick the heck out of it to get it off the car. Heat can sometimes seize a wheel to the hub, especially combined with exposure to the elements. Or you can hit the tire using a small sledgehammer. Put a piece of 2x4 against the tire (NOT the wheel) and hit that with the hammer. Hit it at different points around the tire and eventually it'll come off.

Posted on Jul 29, 2008

  • 1 Answer

SOURCE: 2003 Toyota Sienna - Need to replace left rear brake light

Hi -
I just replaced my left rear brake light on my 2005 Sienna. I followed the manual directions and removed the two metal bolts from the tail light cover. However the assembly did not come off. I could open it a little and it appeared to be bolted from the inside. I looked online but didn't find an answer. I had already gotten pulled over and I didn't want to go to the dealer so I pulled on the assembly a little harder applying even pressure to the top and the bottom and it popped loose. I didn't yank it. There are two metal pegs that have a little lip on them and thats where you are getting the resistance. Hope this helps.

Posted on Jan 11, 2009

clarktravis8
  • 74 Answers

SOURCE: How to change my rear brake light bulb

Okay you need to lift your trunk remove any carpeting remove hidden screws to undo light fixture be careful not to drop the case once case is in your hand remove the appropriate bulb that needs replacing after wards reinstall light housing/casing and screws good luck with this. Please Rate Me. And for further assistance you can always ask me.

Posted on Apr 25, 2009

landsend
  • 1066 Answers

SOURCE: Where are the bulbs for the intrument cluster in a

When you remove the instrument cluster, the back side will have a printed circuit board that the bulbs and bulbs holders twist into.
When you receive advice from this website you have to understand that without the item in front of us, we are only able to provide "a best guess" as to what the problem might be based on you description of the defect.  If you haven't described a clear and precise description of the defect you decrease the chances of an accurate reply.  Thank you.   

Posted on Apr 29, 2009

  • 150 Answers

SOURCE: 2005 Toyota Sienna rear brake light problem.

have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights

Posted on May 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace a front side marker bulb on a 2007 Toyota Yaris Sedan


You don't need a dealer for much of anything

All of todays vehicles require removing the lamp
assembly or housings,front or rear, of any vehicle,to
take out the lamps/bulbs

If you open the hood you will find screws that hold it in place

May not be an easy job, but that's the junk were sold

Sep 05, 2012 | 2007 Toyota Yaris

1 Answer

Hi, my 2002 toyota sienna's engine light does not come on on the dash board when you start the van. All the other indicator lights come on and then go off after a few seconds. What could be the...


The problem is a blown bulb, you will need to remove the cluster and replace the bulb. you will need to remove the cover around the cluster and then you will see the four screws holding the cluster. remove thoughs screws and pull cluster out slowly. the cluster will need to be pulled out enough to get to wiring that plugs into the rear of it. unhook the connector from the rear. with the cluster out you will see the bulbs on the rear, locate area of the bulb, remove the bulb and to make sure its the correct bulb shine a light through the hole of the bulb you removed and look at the front of it to see if thats the engine light. good day.

May 29, 2011 | 2002 Toyota Sienna

2 Answers

NO LIGHTS ON LEFT SIDE OF ODOMETER PANEL - FUSE OR MAJOR WORK?


fuse ok.need to remove instrument cluster and see if good connection on the cluster os maybe yo can see a break in plastic circut board.I would have another instrument cluster handy if old unit not repairable

Feb 12, 2011 | 2001 Toyota Camry Solara

1 Answer

How do you change rear windshield brake light bulb in 1988 olds 88?


Hello there,

First of all, it isn't all that easy or quick. First, gently work the gray, carpet like cover loose from the area around the tail light ,(this may give you a little trouble). Once you have done this, you will see three silver nuts. These must be unscrewed. The lower left nut must be accessed through a hole next to where the trunk lid fits. (The screws are permanently attached to the lens housing so will not drop into obscurity when the nuts are removed). After removing the nuts, GENTLY work the lens housing away from the car. You may need a screw driver to unseat the housing, but just be gentle.

You will find three bulbs inside the lens. The brake light bulb is on the lower right side. Simply pull the old bulb out and insert the new one.

Best of luck.

Jan 11, 2011 | 1988 Oldsmobile Delta 88

1 Answer

2004 yaris how do you change headlight bulb passenger side as there is no room for your hands to get in


to change passenger side headlight bulb,on 04 plate yaris, remove bulb cover at rear of lamp,take off fuse box,although this only gives you slightly more room,and have someone with small hands,replace bulb,as it is nearly impossible if you have large hands.It is awkward but can be done,EVENTUALLY.

Feb 05, 2010 | 2007 Toyota Yaris

2 Answers

How to change brake lights on my 2007 toyota yaris


on either side of the boot interior, there are what look like air vents. these clip out from the top (with a flat screwdriver) you then unbolt the light unit, pull it out. the bulb holder then unclips easily.

Jul 13, 2009 | 2007 Toyota Yaris

2 Answers

How do you change a rear signal bulb in a 1990 toyota celica?


hi ders a plastic cap on the top of your rear light when u open the boot door,take out the screw under it and pop the cover off the orange piece on the side n unscrew the bolt..carefuly...it should just pop off then

Jun 20, 2009 | 1990 Toyota Celica

1 Answer

How to change my rear brake light bulb


Okay you need to lift your trunk remove any carpeting remove hidden screws to undo light fixture be careful not to drop the case once case is in your hand remove the appropriate bulb that needs replacing after wards reinstall light housing/casing and screws good luck with this. Please Rate Me. And for further assistance you can always ask me.

Apr 25, 2009 | Toyota Avalon Cars & Trucks

3 Answers

Replacment of a dash light. Toyota Corolla 1998


There is a plastic garnish surrounding the instrument cluster held in by 2 philips head screws. remove the screws and gently pry the garnish from top first then sides then it should pull out.

Then remove the 3 screws holding the cluster in place (2 bottom 1 top). Once that is done gently flip the cluster bottom up and pull out some to expose the wiring harness. Remove the 3 connectors from the back and then the cluster will pull out.

There are 3 bulbs that control the overall lighting of the cluster. They are spaced about every third across the rear of the cluster. They are the larger Green knobs. Remove the 3 large green knobs and replace the bulbs with the appropriate size. You can call your local parts store to find out the size.

Its a 5 minute job and does not require the entire removal of the dash board.

-ASE Master Tech
-Lexus Senior Tech
99 Corolla Owner.

Mar 13, 2009 | 1999 Toyota Corolla

Not finding what you are looking for?
2007 Toyota Yaris Logo

Related Topics:

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...