Question about Chevrolet Chevy
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you nead to check all you vacuum lines for leaks it sounds like you have a vacuum leak or the o2 sensor is going bad on bank 1 **** i still say vacuum leak
Posted on Nov 23, 2008
Hi. You need to clean the Mass Air Flow Sensor.
This is an easy job.
Get a can of throttle body or brake cleaner spray at your local auto parts store.
Open the hood, and locate the air filter box. follow the tube from the filter box towards the engine. Look for a small black box with 2 screws holding it to the air tube, Remove the wire connector and observe inside the sensor with a flashlight. You will see 2 small wires, and they will appear fuzzy or dirty. Spray the interior with the cleaner until the wires are nice and clean. Do not use compressed air, you will damage the sensor. Put it all back together and drive it.
This will def fix your issue. This is a vey common problem. If you do it yourself, you will save 70 + bucks.
Thanks for choosing FixYa, and a FIxYa rating for my assistance would be greatly appreciated.
Posted on Jan 23, 2009
Those codes are for the oxygen sensors, lean fuel mixture on both banks. Change them, problem with stalling and rough idle should go away.
Posted on Apr 23, 2009
Tips for a great answer:
Sep 21, 2013 | Cars & Trucks
Aug 10, 2013 | 2000 Chevrolet Prizm
Feb 22, 2012 | 2001 Lexus RX 300
Sep 05, 2011 | 2001 GMC Jimmy
Jul 06, 2011 | 2001 Mercury Sable
Feb 27, 2011 | 2001 Hyundai Santa Fe
Aug 11, 2010 | 2001 Ford F150 Styleside SuperCrew
May 15, 2010 | 2001 Nissan Sentra
Nov 23, 2008 | 1998 Buick LeSabre
478 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: