Question about 1994 Ford Taurus

1 Answer

1994 ford taurus wire is unplugged and cant find where it went

The turn signals and the hazards are not working i think that this wire is the problem it has a brown female connector with two holes one of the wires is lightblue with a reddish pink stripe and the other wire is a darkish brown color with a white stripe. i cannot find where it plugs back in. the wire is coming out of a bunch of of wires wrapped together in the upper left corner
under the dash

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 421 Answers

Did you get the car like this? how would these wire become unplugged? these cars have crappy turn signal flashers and combo switches i would check those also please rate -jeff

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No brake, turn, or hazard lights on rear of 2008 ford taurus


sounds like a wiring loom connector may have come apart as affecting all rear lighting trace loom back from light cluster to see if all are connected properly

Mar 29, 2014 | 2008 Ford Taurus SEL

1 Answer

Back lights on ford taurus out brake light work turn signals work hazard lights work but no back lights.


Go the cheapest way first..... Replace both bulbs. It may be that both bulbs went out relatively at the same time

Oct 10, 2012 | 2002 Ford Taurus

1 Answer

1994 ford thunderbird flashers work but blinkers do not


There are two possibilities:-- 1) The flasher relay or 2) The turn signal switch.
check flasher relay,but most likely the fault is the turn signal switch . ---------- The turn signal / hazard flasher relay is located behind the dash, right of the steering column. -------- Since the hazards do work this eliminates a faulty relay as both the hazards and turn signals use the same relay to function. This leads to either faulty wiring at the multifunction (turn signal) switch or a faulty switch itself.It is always a good idea to check the wiring before purchasing the switch.Starting at the switch its the lever.And the switch wiring gets connected to relay. Test it with a meter to see if it is getting power when it is supposed to (turned ON ). If it is then wiring is OK and switch is bad. If it's not getting power then there is a open circuit somewhere in between.so its the wiring problem. ------------ this will help.Thanks.Helpmech.

Dec 21, 2010 | Ford Thunderbird Cars & Trucks

1 Answer

My 1994 ford ranger is have lighting problems, when my dashboard lights are turned on, my hazards in the back stay solid, and then my left turn doest work, it just stays solid when i turn it on, but when...


Check grounding at start of the wires coming from under the truck you will proble find a corried ground wire whitch cause afeed back to other lights thus completing circuit.

Aug 18, 2010 | 1994 Ford Ranger Supercab

2 Answers

96 Ford Taurus no turn signals or hazards


Take the turn signal lever and jiggle it, a lot. If they start working, the switch is bad. You can also turn on the hazards and take hold of the button and push it left , right , forward and back and see if they start working. If so, replace the turn signal/ hazard switch.

Nov 24, 2009 | 1996 Ford Taurus

2 Answers

Turn signals, hazards not working


Mine just went out this past week and found the flasher/hazard fuse inside the glove compartment under the plate with the pull cord to access.The 1994 Jeep Grand Cherokee Laredo AWD part# on the fuse and called to confirm with a Jeep dealer is:
56007243 and appx. 44.00 from the dealer, may be able to get from an auto store as well.

Good luck if it is the fuse box you were looking for.

Aug 09, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Back blinkers not working, front good, FUSE GOOD, LIGHT GOOD


set ur hazards if they blink its not ur wirring its either ur turn relay or turn switch

May 22, 2009 | 1994 Ford Taurus

1 Answer

'94 taurus, no turn signals


The switch in the coulum is typicaly the problem. Do you have hazards?

Oct 16, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...