Question about 1993 Chrysler Concorde

Open Question

1993 chrysler concorde, engine control fuse blowing on acceleration. replaced alternater, still blowing fuse. the car will buck during accereration, if I let off the gas it will likely not blow the fuse, however if I stay in the acceleraction it will blow the fuse. any ideas on how to fix the problem?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2039 Answers

SOURCE: 1996 chrysler concord lx problem

burn fuse check them out one by one thank you for using fixya pierre

Posted on Jun 23, 2008

Ad
tripletauto
  • 1450 Answers

SOURCE: 1993 Chrysler New Yorker 5th Ave No Head lights

hope our chat fixes

Posted on Oct 03, 2008

  • 1596 Answers

SOURCE: 2002 chrysler concorde intermittenraly blows wiper /washer fuse

It Is Normaly The Component Useing the most Amps that BLOWS This Case its the Motor
No Test for this

Posted on Feb 11, 2009

emjem74
  • 162 Answers

SOURCE: will only blow cold air , sometimes it will blow hot

engine size irrelevent. but sounds remarkably like you have your thermostat is either damaged or missing as this can cause the system a very long time to heat up blowers? if not then you are looking at something like an air block in your initial system. have you done any major work on engine which would involve empying your rad? if so then the later is true but if not then you might just get away with a new thermo.

Posted on Mar 03, 2009

  • 1 Answer

SOURCE: a/c not cold overheating were fusebox

The fusebox is located on the drivers side/ dashboard. You must have the door open to access.

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a knock on 2002 Chrysler concorde lxi has 3.5 engine. is worse when accelerating.


Dear Dennis,
Mechanics will tell you you have an engine that is about to blow up. This is the symptom of such a question.
I should recommend you not attempt to even start the car at all. Have it towed to a honest garage for a true diagnosis.
The repair may run from many hundreds up to a couple thousand dollars.
God bless your efforts.

Nov 10, 2016 | 2002 Chrysler Concorde LXi

1 Answer

I have a 95 Chrysler Concorde upon start it hakes and is very rough on idle. when i accelerate it chugs like it doesn't want to accelerate.the check engine light is not on.


Sounds as if there is one or more cylinders misfiring. Possible defective ignition coil/spark plug/s/ or ignition wires. IS the vehicle blowing black smoke out the tail pipe? If so, another possibility could be an over fuel situation caused by a defective sensor or leaking fuel pressure regulator. My guess would be a mis fire causing the engine to not fire on all cylinders

Feb 15, 2016 | 1995 Chrysler Concorde

1 Answer

What causes engine control fuse to blow in 1995 chrysler concorde LHS


The fuse will blow if there is a direct short in one or more of the devices this fuse protects. Check owners manual to see if a description of what this fuse protects is there. You will then have to eliminate each device on the fuse one at a time to isolate the cause of the short

Jul 20, 2015 | Chrysler Cars & Trucks

1 Answer

1993 Crysler Concord has no power to the climate controls no power to the horn no power to the power windows


Go to Auto Zone,sign up free and put your vehicle in the list for your garage.Look up repairs for your vehicle on there site,they have great help and also trouble shooting videos that will not doubt solve your issues.The temperature control panel on your Chrysler Concorde controls the fan ... Open the fuse panel under the steering column and pull out the fuse for the radio

Apr 19, 2014 | 1993 Chrysler Concorde

1 Answer

HOW TO DISABLE CRUISE CONTROL ON 1993 CHRYSLER CONCORDE


if the cruise control is bad and you want to disable it. just pull the fuse in fusebox. if you cant find the fuse. just pull the wire connection off under hood.

Apr 20, 2011 | 1993 Chrysler Concorde

1 Answer

My radiator fans wont work in my 1993 Chrysler Concorde 3.5 liter


you may have a blown fuse check the fuses,if fuses are OK the problem could be the temperature sensor that activates the fan is faulty or it may be a loose wire or a connector plug,check the wiring,pull the connector apart & check for corrosion.....hope this helps.....cheers

Aug 10, 2010 | 1993 Chrysler Concorde

1 Answer

I have a 2001 chrysler concorde. the trouble codes


I RECOMMEND REPLACING THE OUTPUT SPEED SENSOR..ABOUT 40 BUCKS..WILL CAUSE THESE OTHER FAULT CODES AS WELL

Aug 30, 2009 | 2001 Chrysler Concorde

1 Answer

1994 chrysler concord electronic transmission control malfunction


well what you need is to replace the two sensor on the trans the input and the output speed sensors they less than $30 each and the car will shift again

Feb 26, 2009 | 1994 Chrysler Concorde

Not finding what you are looking for?
1993 Chrysler Concorde Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...