Question about 1994 Toyota Land Cruiser

Open Question

I have a asin seiki a1 1000 winch and the brake will not release under load

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I step on the brake I don't hear no clicking noise what is wrong?


What kind of clicking noise do you expect to hear? Applying the main brakes is usually a silent activity.
If you are referring to the emergency brake, it is the clicking of the ratchet when applying the emergency brake. The clicking is the sound of spring loaded metal teeth bouncing along a cog wheel. The action is similar to the teeth on a hand winch that does not allow backward turning. If when applying the emergency brake the sound is not heard then the spring may be broken or dislodged.
Does the brake engage? Does the handle stay pulled until the brake is released? If not then the locking of the brake is not happening.

Oct 10, 2016 | Cars & Trucks

1 Answer

Having trouble with my logging winch constantly pulling in.


service the clutch section of the winch as it appears that something is broken in that section of the winch
This situation is dangerous because if something happens, the winch cannot be disconnected or reversed immediately

May 25, 2015 | Cars & Trucks

1 Answer

The special rod will not raise tire.Under load the rod mechanism slips from winch connection.What can I do?


try one that has the same or better end also try lifting tire up while turning and you can lower in down and lubercate it with spray lube and try again

Sep 30, 2014 | Cars & Trucks

1 Answer

Hercules winch on timberjack 230 won't pull or hold a heavy load


check for failed sheer pin in the drive shaft attached to the winch brake.

Mar 02, 2014 | Cars & Trucks

1 Answer

Will a nissian titan tire jack fit into a pathfinder to let the spare tire down


Most under body spare winches are driven by either a cross or a loop on the end of the bar. The winch will be a hollow bar with a slot cut across it so either will do the job. Remember that the winch is locked and requires some initial effort to release the clutch in the winch so that you can wind it down

Jan 22, 2014 | Cars & Trucks

1 Answer

How do you release spare tire on a toyota 4runner 93


If the spare is under the back use the winding handle and inset in the slot of the winch. The winch has a clutch activation that allows you to wind it down or up and stops it at the last position you stopped at. It will be a bit hard to start but will turn freely when you do so

Apr 07, 2013 | Cars & Trucks

2 Answers

How to remove tire from under the van


There is a compartment inside the rear hatch (sometimes on the driver's side and sometimes on the Passenger side) that you can open and your tire changing equipment and instructions will be in there. (unless someone removed it) The jack handle must be used to "crank" the winch to let down the cable that holds the spare tire in place.

Jan 29, 2011 | 1996 Dodge Caravan

1 Answer

Spare tire removal from underneath van cant seem to get the tire from the bracket is there a specail way to remove it


What's happening is that the latch is not releasing - a safety feature so the tire doesn't drop down onto the road should the cable or assembly rust/break etc. While researching I got this info from another forum: Jack up the rear of the van. Wind the spare "up". now put your jack under the spare to support its weight. Then "unwind" it. now look up through the spare to the winch assembly. You'll see a latch at the back - towards the rear of the van. Reach in with a long screwdriver and release it by moving it towards the rear of the van. If you've unwound the winch you should be able to move the plastic holder downwards. Once you've done this you can allow the tire to come down and remove it. Now remove the winch assembly - 5 or 6 bolts. Odds are you'll see apiece of wire hanging or it may have fallen out. You'll also see a spring clip - it clips onto the underside so when you unwind the winch it should pull the aforementioned latch to release the tire. You should be able to get this back in place by fiddling with it, or just attach a wire to the latch to work it manually. Or buy a new winch assembly - approx. $150. Good luck

Dec 22, 2009 | 1994 Plymouth Voyager

1 Answer

I have a Aisin seiki A1 1000 winch on a Landcruiser that has lost some oil from the gearbox. The oil has a reddy colour. Is this a special oil or will any good gear oil do.


if it has a funny smell and its thick then i would use ep90 back axle oil.But without sticking my finger in it to see its difficult to know ,it could be dextron which is thinner and like auto transmission oil

Oct 23, 2009 | 1994 Toyota Land Cruiser

1 Answer

Passenger side front brake caliper is not releasing.


well your brake porportion valve is not working right oh well good luck

Jun 03, 2009 | 2005 Dodge Caravan

Not finding what you are looking for?
1994 Toyota Land Cruiser Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...