Question about Pontiac Grand Prix

1 Answer

My seat belt sensor keeps going off when I am wearing my seat belt!!

Posted by on

  • Jason Conway
    Jason Conway May 21, 2011

    what kind of Pontiac

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

I found this post via genvibe.com, it worked for me on my 07 Vibe:


This will turn off the 1 minute beep if the car is running and either the passenger or the driver takes off their seat belt.

Get in the car and turn the key to on (don't start the car,) then change the odometer to display "odo" and not trip A or B.

Turn the key off.

Turn the key back to on. Within six seconds of doing this, press and hold the odometer button. Do so for 10 seconds. Then, while still holding the button, buckle up, edit: then unbuckle. The "odo" display should then change to say "b-on." let go of the odo button to get it to read "b-off." Then wait for the display to change back to the odometer. That's it, you're done.

The car will still beep right when you turn it on for 3 seconds if you don't have a seatbelt, but the dash light will continue flashing till buckled up. It won't beep if you or your passenger unbuckles for a moment. Salvation!


Read more: http://wiki.answers.com/Q/How_do_you_disable_a_driver's_seat_belt_alarm_on_a_pontiac_vibe#ixzz1MxTn2Oa0

Posted on May 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every time I go over a big bump in road one ,two or even three rear seat belt lights come on and then start pinging/ringing and do not stop until either I switch engine off or fasten rear seat belts.


The sensors in the seat detect weight and assume there are occupants in the seats without the seat belts done up and this then triggers the warnings. If you are carrying items on the seat that bounce when you hit a bump that may trigger the alarms. Even movement in the seat unit itself when you hit a decent bump could trigger the sensors.

Just keep the rear seat belts done up and you will not have a problem with false warnings.

May 19, 2015 | 2013 Chevrolet Spark

1 Answer

I have a 1987 Olds. Delta 88 and I have (2) questions: Drivers side window will not go up or down, possible motor problem? Seat belt light does not go off


There is a sensor in the belt buckle that wears out over time and also gets dirty. Try cleaning the buckle if that does not work replace the sensor. Does the drivers window not roll down and that is what makes you think it has no power? Take the door pannel off and have someone push the window button while you test to see if it gets power from a volt meter. If it does then the motor is bad.

Feb 16, 2014 | 1987 Oldsmobile Delta 88

1 Answer

How to disable seat belt warning beeps?


First... You should have your passengers wear the seat belts but if you insist you can find the wire going to the seat belt buckle and unplug it under the seat.

Jan 14, 2014 | 2006 Toyota Prius

2 Answers

SEAT BELT LIGHT BLINKS ALL THE TIME


dumb question first, are u wearing them? they have a sensor in the front seats to detect if the front two seats are occupied, if u are wearing them, and it still blinks.. unplug the seat sensor to see if that helps.

Jan 11, 2013 | 1997 Chevrolet Cavalier

1 Answer

The 4wd light in my 2005 escape is bllinking


Hi there:
The 4WD module gets info from the ABS module, so when one has a fault, it affects the other. First I suggest inspect the front ABS sensor indicator rings an the axles and scanned the ABS module to know if some fault code is there. They are known for breaking, and possible damage could occur to front abs sensor. Repair the sensor issue and both lamps should go out.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 08, 2012 | 2005 Ford Escape

4 Answers

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?


Check under both seats and make sure the wire harness is plugged in all the way. Some times shoving stuff under the seat unplugs wiring harness; seat belt sensor, occupant weight senor for air bags, heated seats & power seats (could be more than one wiring harness. Look inside belt buckle fastener; is it crusty with anything (food, crumbs, coin change)? Blow it out with a portable can of air. Make sure both the male/female parts of belt are clean, non-rusted/corroded & non-damaged to make good electrical connection when belted in; this turns off your belt warning light and bell. Check all wiring from the belt buckle release a the way down to under the seat; both sides...both seats They both seats could be interlinked into system; when one fails (bad connection) the other seat sensor fails also.

Jan 11, 2012 | 2000 Ford Mustang

2 Answers

Light is on the dashboard. looks like a person sitting in a seat with a seatbelt on , and a round circle thing like a bll, the view is from the side. what does this mean?


It is telling you that either your seat belt is not on or your passengers is not on. There is a sensor inside the seat belt buckle that tells the car you are wearing it. If the passenger seat senses the weight of a person (or big dog) and they don't have the buckle on then the light will come on. If the seat belts are both buckled in then you must have a bad sensor on the buckle.

Jun 17, 2011 | 2003 Ford Escape

1 Answer

Proper wearing of seat belt


go to this site and you can download the info
http://www.chrysler.com/en/owners/manuals/index.html

Dec 30, 2009 | 1997 Chrysler Town & Country

1 Answer

Seat belt signs keeps beeping whilst wearing seat belt


just make sure u have nothing an the passager seat becuse any weight on that seat the car thnks there is someone sitting there with no seatbelt on ( no handbags left on the seat) if this is whats worng just plug in the other seat belt. if this is not whats wrong look under the seat and there is two wires comeing from the seat bel buckle disconconect them or join them one or the other will work ( be careful not to touch the air bag wires located in the middle of the seat in yollow plug)

Oct 10, 2008 | 2005 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...