Question about Ford Explorer Sport

1 Answer

I have a 2003 2 door explorer sport, just recently my turning signal and break light have stopped working on the passenger side!! I changed the light bulb, and nothing!! I changed the turning signal light socket and nothing. I've checked the relay and it works fine for the hazard lights and left hand turning signal!! I had a 2001 2 door back in 2001 and I found out one day that I had no lights at all!!! I brought it in and they said that some sort of wiring harness had come undone due to tilting the steering wheel, could I be stuck with the same problem yet again??? Or is there something that I have over looked?? please help!!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

No, because the left side is still working. The loose wiring was to the multifunction switch (turn signal).

Power gores through the turn signal switch to the brake switch on the brake pedal, then to the rear lights. Does the highmount brake lamp work?
At the RH lamp socket, Measure the voltage between the RH rear lamp C4032 pin 3, circuit 5 (OG/LB), harness side and ground. Should be 12 volts.

try that first.

Did you change the front and rear bulbs?

Posted on May 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Explorer Sport Trac, Turn Signal, Tail lights work but not brake lights on either side


check brake light switch on brake pedal arm. Does high mount stop lamp work?

Aug 06, 2011 | 2002 Ford Explorer Sport Trac

1 Answer

I recently purchased a used 03 Chevy Venture van. The passenger sliding door doesn't open. It worked for 1 week and stopped. The driver side sliding door has a broken handle so I'm able to open that door...


Pain but fixable. Sounds like the linkage is not connected. Even a mechanic will have to remove the door panel and fight with it. If you can remove the rear seat from the drivers side side door then you might have room to remove the passenger side door panel to fix it. Usually clips are the first thing to break on door handle/latch linkages

Apr 06, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

2003 Ford Explorer Sport rear turn signal acting up


if it's only the rear turn signal that does this, check the plug where the bulb snaps in. if loose or bad connection to bulb, it will sometimes work and sometimes not. if its both the front and rear turn signal bulbs, could be the combination switch. these were common failures on fords

Feb 18, 2010 | 2003 Ford Explorer Sport

1 Answer

My driver side door won't lock or open , the same problem is starting on the passenger side my is a 97 ford explorer sport, 2 door


I have a 2003 chevy silverado and the passenger side power window does not lock or the window wont go down.

Dec 02, 2009 | 2001 Ford Explorer Sport

1 Answer

2003 ford explorer sport turn signals blink rear brake lights


The ford explorer sport track. Will have a short either at the plug of the multi-function switch or 6 inches down where the column bends the wires during tilt.

Sep 05, 2009 | 2003 Ford Explorer Sport

1 Answer

Right turn signal not working on 1992 Ford Explorer Truck


turn on the hazard light so you can identify the bulb that is actually deffective. the procedure to replace can be found on youtube.

Mar 10, 2017 | 1992 Ford Explorer

1 Answer

Break lights, speed control and turn signals malfunction


sounds like pinched wires take the cover off and look for bear spots maybe tape or hotglue

Dec 12, 2008 | 2003 Ford Explorer Sport Trac

1 Answer

Dome light won't turn on.


my dome light wont turn on at all and i dont know where the fuse is iv checked all my fuses and there fine could it be a capasiter

Dec 06, 2008 | 2003 Oldsmobile Alero

1 Answer

Door lock light


make sure the contacts are clean and moving freely on the door switch for that door.


Robert

Sep 24, 2008 | 2001 Ford Explorer Sport Trac

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...