Question about 2000 Jeep Cherokee

1 Answer

When i use the left blinker my hazards will start flashing. but not when i use the right blinker. and periodicly my left blinker will work for short periods of time

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

That's consistent with a signal switch (multi function switch) failure. It's part of the signal arm and isn't that difficult to replace. (covers on the column need to be removed). Instructions for that can be found in chilton or haynes manuals but if you have any mechanical aptitude you likely can just look at it and see how it comes out.

Posted on May 21, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Right side turn signal switch does not work/blink?


there is usually a turn signal relay under the dash that clicks when you turn left and right you may need to replace it they wear out over time
25718368-m35oz4jvdfvvmght4a51n0jl-2-0.jpg cheers

May 28, 2015 | 1992 Isuzu Rodeo

1 Answer

Brake lights 65 mustang stopped working.I wondered can the issue be in steering column

On a "one brake light bulb per side" setup,the brake switch feeds 12v to the turn/hazard switch,and the switch will apply 12v to both when no turn signal activated,the right only when the left signal is on,the left only when the right signal is on,and none when the hazards are on.With this in mind,it IS possible that the turn signal switch or wiring is the issue.If you are still running the original switch,try removing the switch and cleaning/regreasing the contacts(or look for something obviously worn or broken).If the switch is bad-hey,you got almost 50 years out of it! I'll bet you won't get that much longevity out of anything built now!

May 31, 2012 | Ford Mustang Cars & Trucks

1 Answer

Right blinker works, but left one doesn't work at

either check for voltage at the blinker and also check for left blinker fuse . NO voltage at connector there is an open in wire replace try to find the open torn insulator or wire being exposed.

Jul 02, 2010 | 1997 Mitsubishi Eclipse

1 Answer

1992 jeep cherokee all blinkers stopped working, checked flash unit and I dont think its a bulb becouse they gradually got weaker and more irregular over a period of a week or so.

Don't know if this will help or you may already know.Your car has two flasher units.One for the hazards and the other for the blinkers.Do the hazards work?If so,the flasher unit that is at the top of the fuse block,on the left,may be the problem.Hope this can help you

Oct 18, 2009 | 1992 Jeep Cherokee Sport

2 Answers

My blinkers quit working and its not the fuses

hazard warning light switch or the flasher relay

Sep 10, 2009 | 1996 Honda Accord

1 Answer

I have replaced the blinker relay when i use my right blinker it works as soon as i turn the left or use the hazards it blows the fuses. not shure where to start to look

Sounds like a bulb on the left side is shorting out. First, check the bulbs, if that isn't it, try using a continuity meter to test between the positive wires and the ground at the bulb socket.

Jul 30, 2009 | Pontiac GTO Cars & Trucks

1 Answer

Turn signals, Hazard lights

I would replace the bar switch assembly.

May 18, 2017 | 1998 Jeep Wrangler

Not finding what you are looking for?
2000 Jeep Cherokee Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides