Question about 2004 GMC Envoy

2 Answers

Dash board guages

The dash guages & PRNDL indicator are out. The check engine light is not on. They did this once before, but came back. Now they have been out a few days.



Posted by on

  • Anonymous Dec 13, 2008

    All my gauges have gone out. I've had 1 diagnostic test done on the tachometer which cost me 79.00 and they are telling me that i will need to have all the individual guages done @ 79 bucks each!! can someone help me?



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GMC Master
  • 3,289 Answers

The gauges are available for as little as $3 each on eBay. Replacing them will require the removal of the dash cluster and desoldering / soldering skills. Seach the phrase "GMC stepper motor" (without the quotes) on eBay to find them.

Also, has a write up on this very issue. You will need a free account to see (and post if desired) the discussion.

I hope this helps!

Posted on Nov 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 324 Answers

Try resetting the computer, by removing the positive battery cable for 10 mins, if this does not work, then you more than likely have a computer problem, as crazy as it sounds, your computer makes those work.

Posted on Nov 26, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 suberban dash board

Tilt steering down,, turn on key shift to low gear,, grab front of the dash where the 2 pieces meet, top right side ,,,and pull it will come out,,, no bolt just presure clips,,, very simple,, the light switches will need to be unpluged when you get it loose to take it all the way out,,,to take the guage cluster out ,,,some have 4 ,,,7 mm bolts on the corners,,,some have star type bolts,,, then unclip the shift indicator line in the center of the cluster,,,"looks like fishing line with a clip on the end" and pull out the cluster,,,,also be sure to put the indicator back in th same spot or your PRND321 will off

Jun 30, 2014 | 2003 Chevrolet Suburban 1500

1 Answer

My van was shifting good until i hit 40mph. then it shifted ruff. today it died completely. the van starts but it will not move forward or backwards. when i move the shifter, the indicator on the dash stay...

Key on engine running ,, look the light of PRNDL , try shift lever into R and N and D and L.if light does not turn on. the prndl switch on transmission near shifter shaft is defect water got inside the switch,

Sep 16, 2013 | 2006 Chevrolet Express

1 Answer

Shift position indicatior light on dash

Your Neutral Safety Switch or PRNDL Switch needs to be adjusted

Apr 12, 2013 | 2007 Dodge Ram 2500 Mega Cab Laramie

1 Answer

92 S10 When turn on HeadLights, Dash Board lights n Guage stop

i had an s10 blazer years ago that kinda did the same thing. the lighter socket was shorting out. so check the lighter and any power outlets you may have first thing. if it is the lighter its gonna be hot so be careful.

Sep 09, 2017 | Chevrolet S 10 Cars & Trucks

1 Answer

Oil Indicator light on dash board not working, the wire connections have been checked

did you check the sesor what about the oil indicator bulb inside the guage cluster.??

Jun 04, 2009 | 1990 Toyota Corolla

1 Answer

Chrysler 99' town&country idiot lights guages go on&off

This is a very common problem on 1998 dodge caravan, voyager, t and County. You have a cracked circuit board in your instrument cluster. It is a dealer item. You can remove your cluster and install the circuit board yourself to save money but after the install you will have to take the vehicle back to the dealer to have it calibrated before the tach and the speedometer will work.

May 27, 2009 | 1998 Chrysler Town & Country

1 Answer


it could be something as simple as a bulb being burnt on the dash panel

Jul 07, 2008 | 2002 Buick Century

Not finding what you are looking for?
2004 GMC Envoy Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides