Question about 2000 Jeep Grand Cherokee

2 Answers

Both tail light do not work but the brake light and back up do

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 8,531 Answers

Hi, check fuse 6 inside the Jeep. If the fuse is good, try swapping the relay with a similar one. If this doesn't work, please get back to me for instructions on how to interrogate the relay socket.

both tail light do not work but the brake light - jturcotte_1688.gif

Posted on May 20, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 64 Answers

I would start by checking the fuse for the tailights. If that is good, then check the bulbs themselves. The taillights are on a circuit by themselves and sometimes on the same circuit as the dashlights. Hope this helps

Posted on May 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 f350 cab and Chasse front blinkers work but my back blinkers and brake lights don't work


brakes and turn signal lights work together not tail and turn your mistaken

Jul 15, 2017 | Cars & Trucks

1 Answer

Dim tail light.


Brake light switch under dash and actuated by the brake pedal lever is out of adjustment or faulty. Adjust or replace it and you'll have your brake lights back. The dim tail lights may just be that you have possible replaced them with the wrong bulbs or the ground to light housing is faulty.

Jul 11, 2017 | Cars & Trucks

1 Answer

Both tail lights don't work turn signal and back up lights work but no stop light and no tail lights


could be a glitch in the front power controll modual disconect the battery wait couple minuts reconect and see if thay come back
also replace the bulbs even the one on the cab your therd brake light alot of ppl dont relise its out and it will help determin if its in the tail lights or its in the brake switch if the therd brake light lights and the tails dont replcae the switch after inspecting the tail light conectores for corotion

Mar 11, 2014 | 2005 Dodge Ram

2 Answers

Brake lights are not working but my back window brake light works and so do my tail lights and turn signals. 01 chevy malibu


if rear window stop light works has blown globes in other 2 tail and stop are different circuts fit 2 new globes only go in 1 way

Sep 16, 2013 | 2001 Chevrolet Malibu

1 Answer

Blinker/Tail Light Issue


The Bulbs Have 2 filliments in them if 1 is burnt out that would give you the fast not working tail light there may be an issue with the brake light switch located above the brake pedal on the arm.

May 16, 2013 | 1997 Plymouth Voyager

1 Answer

How do i remove the sensor for the rear tailgate?


1) Locate and remove sensor.
The sensor is located under the drivers tail light. Unclip it from the body and then unplug it.

2) Bypass the tail light circuit.
Connect the tail light signal wire (Green) to the tail light wire (Green w/ Red Stripe). I recommend using wire tap in squeeze connectors that way you dont have to cut any wires.

3) Bypass the brake light circuit.
Connect the brakelight signal wire (Green w/ White Stripe) to the brake light wire (Red w/ Blue stripe) and the the 3rd brake light wire (Red w/ White Stripe). Again all three of these wires are to be connected together.

4) Throw away your broken Tail Lamp Failure Sensor
Do not plug your sensor back in. Doing so will cause the annoying orange lamp failure warning light on your dash to stay on. Leave it unplugged ant the light will stay off.

5) Test your work
Turn on your lights and make sure your tail lights work properly. Have a friend step on the brake pedal, and make sure your brake lights work properly as well. Dont forget to check the Third brake light.

Sep 20, 2012 | 2002 Chrysler Voyager

1 Answer

On 2002 jeep laredo brake lights dont turn on if lights arent on


That does not make any sense. Do the tail lights work? There are supposed to be separate filaments for brake lights, tail lights, and turn signals. In particular the center brake light should not be possible to be confused with tail lights or signals. Does it come on? If not, then you probably have no brake lights at all, and that is probably because of the bad fuse or the switch on the brake pedal for the brake lights.
If there is some sort of cross over between tail light and brake lights, that is usually from a bad light socket ground; which results in current backing up from one system to another. But then each is usually only half brightness.

Jul 20, 2010 | 2002 Jeep Grand Cherokee

1 Answer

No brake lights in tailight assm. 3rd brake light works correct


It goes straight from the switch to the tail light circuit
make sure you don't have a bad tail light socket

Apr 25, 2010 | 1995 Chevrolet Camaro

2 Answers

Rear tail lights not working


If both tail lights are not working it is likely to be a fuse or bad connection under the hood or a connector at the back see if you can trace the wires to a connector and see if it is dirlty or corroded.

Mar 02, 2010 | 1996 Dodge Dakota

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...